Scroll to navigation

foo2hiperc(1) General Commands Manual foo2hiperc(1)

NAME

foo2hiperc - Convert Ghostscript pbmraw or bitcmyk format into a HIPERC printer stream

SYNOPSIS

foo2hiperc [options] <pbmraw-file >hiperc-file

foo2hiperc [options] <bitcmyk-file >hiperc-file

foo2hiperc [options] <pksmraw-file >hiperc-file

DESCRIPTION

foo2hiperc converts Ghostscript pbmraw, bitcmyk, or pksmraw output formats to monochrome or color HIPERC streams, for driving the Oki C310dn, C3100, C3200, C3300n, C3400n, C5100n, C5500n, C5600n, and the C5800n HIPERC printers.

COMMAND LINE OPTIONS

Normal Options

These are the options used to select the parameters of a print job that are usually controlled on a per job basis.

Force color mode if autodetect doesn't work.
Duplex code to send to printer [1].
1 off 2 long edge 3 short edge
Set page dimensions in pixels [5100x6600].
Media code to send to printer [0].
Media HIPERC
plain 0
labels 1
transparency 2
Paper code to send to printer [2].
1 A4 2 letter
3 legal - -
5 A5 6 B5jis
7 A6 8 env Monarch
9 env DL 10 env C5
11 env #10 12 executive
13 env #9 14 legal 13.5"
15 A3 16 tabloid/ledger
Number of copies [1].
Set device resolution in pixels/inch [600x600].
Source (InputSlot) code to send to printer [0].
0 auto select
1 tray1 2 tray2
3 multi 4 manual
Draft mode. Every other pixel is white.
Filename string to send to printer.
Username string to send to printer.

Printer Tweaking Options

These are the options used to customize the operation of foo2hiperc for a particular printer.

Set the offset of the start of the printable region from the upper left corner, in pixels [0x0].
Set the offset of the end of the printable region from the lower right corner, in pixels [0x0].
Send logical clipping amounts implied by -u/-l in the HIPERC stream [3].
0 don't send any logical clipping amounts
1 only send Y clipping amount
2 only send X clipping amount
3 send both X and Y clipping amounts
AllIsBlack: convert C=1,M=1,Y=1 to just K=1. Works with bitcmyk input only.
BlackClears: K=1 forces C,M,Y to 0. Works with bitcmyk input only.
Use uncompressed (0) or compressed (1) JBIG data.

Debugging Options

These options are used for debugging foo2hiperc.

Output just a single color plane from a color print and print it on the black plane. The default is to output all color planes.
1 Cyan
2 Magenta
3 Yellow
4 Black
Set Debug level [0].

EXAMPLES

Create a black and white HIPERC stream:

gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE  

-sPAPERSIZE=letter -r600x600 -sDEVICE=pbmraw  
-sOutputFile=- - < testpage.ps   | foo2hiperc -r600x600 -g5100x6600 -p0 >testpage.zm

Create a color HIPERC stream:

gs -q -dBATCH -dSAFER -dQUIET -dNOPAUSE  

-sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=bitcmyk  
-sOutputFile=- - < testpage.ps   | foo2hiperc -r600x600 -g5100x6600 -p0 >testpage.zc

FILES

/usr/bin/foo2hiperc

SEE ALSO

foo2hiperc-wrapper(1), hipercdecode(1)

AUTHOR

Rick Richardson <rick.richardson@comcast.com>
http://foo2hiperc.rkkda.com/

Tue May 02 09:58:23 2017 foo2hiperc 0.0