## table of contents

- bookworm 4.13.1-4
- testing 4.13.1-6
- unstable 4.13.1-6
- experimental 4.14.1-1~exp1

Bigarray(3o) | OCaml library | Bigarray(3o) |

# NAME¶

Bigarray - Large, multi-dimensional, numerical arrays.

# Module¶

Module Bigarray

# Documentation¶

Module **Bigarray**

: **sig end**

Large, multi-dimensional, numerical arrays.

This module implements multi-dimensional arrays of integers and
floating-point numbers, thereafter referred to as 'Bigarrays', to
distinguish them from the standard OCaml arrays described in **Array**
.

The implementation allows efficient sharing of large numerical arrays between OCaml code and C or Fortran numerical libraries.

The main differences between 'Bigarrays' and standard OCaml arrays are as follows:

-Bigarrays are not limited in size, unlike OCaml arrays. (Normal float arrays are limited to 2,097,151 elements on a 32-bit platform, and normal arrays of other types to 4,194,303 elements.)

-Bigarrays are multi-dimensional. Any number of dimensions between 0 and 16 is supported. In contrast, OCaml arrays are mono-dimensional and require encoding multi-dimensional arrays as arrays of arrays.

-Bigarrays can only contain integers and floating-point numbers, while OCaml arrays can contain arbitrary OCaml data types.

-Bigarrays provide more space-efficient storage of integer and floating-point elements than normal OCaml arrays, in particular because they support 'small' types such as single-precision floats and 8 and 16-bit integers, in addition to the standard OCaml types of double-precision floats and 32 and 64-bit integers.

-The memory layout of Bigarrays is entirely compatible with that of arrays in C and Fortran, allowing large arrays to be passed back and forth between OCaml code and C / Fortran code with no data copying at all.

-Bigarrays support interesting high-level operations that normal arrays do not provide efficiently, such as extracting sub-arrays and 'slicing' a multi-dimensional array along certain dimensions, all without any copying.

Users of this module are encouraged to do **open Bigarray** in
their source, then refer to array types and operations via short dot
notation, e.g. **Array1.t** or **Array2.sub** .

Bigarrays support all the OCaml ad-hoc polymorphic operations:

-comparisons ( **=** , **<>** , **<=** , etc, as
well as **compare** );

-hashing (module **Hash** );

-and structured input-output (the functions from the
**Marshal** module, as well as **output_value** and **input_value**
).

## Element kinds¶

Bigarrays can contain elements of the following kinds:

-IEEE single precision (32 bits) floating-point numbers (
**Bigarray.float32_elt** ),

-IEEE double precision (64 bits) floating-point numbers (
**Bigarray.float64_elt** ),

-IEEE single precision (2 * 32 bits) floating-point complex
numbers ( **Bigarray.complex32_elt** ),

-IEEE double precision (2 * 64 bits) floating-point complex
numbers ( **Bigarray.complex64_elt** ),

-8-bit integers (signed or unsigned) (
**Bigarray.int8_signed_elt** or **Bigarray.int8_unsigned_elt** ),

-16-bit integers (signed or unsigned) (
**Bigarray.int16_signed_elt** or **Bigarray.int16_unsigned_elt**
),

-OCaml integers (signed, 31 bits on 32-bit architectures, 63 bits
on 64-bit architectures) ( **Bigarray.int_elt** ),

-32-bit signed integers ( **Bigarray.int32_elt** ),

-64-bit signed integers ( **Bigarray.int64_elt** ),

-platform-native signed integers (32 bits on 32-bit architectures,
64 bits on 64-bit architectures) ( **Bigarray.nativeint_elt** ).

Each element kind is represented at the type level by one of the
***_elt** types defined below (defined with a single constructor instead
of abstract types for technical injectivity reasons).

*type float32_elt* =

| Float32_elt

*type float64_elt* =

| Float64_elt

*type int8_signed_elt* =

| Int8_signed_elt

*type int8_unsigned_elt* =

| Int8_unsigned_elt

*type int16_signed_elt* =

| Int16_signed_elt

*type int16_unsigned_elt* =

| Int16_unsigned_elt

*type int32_elt* =

| Int32_elt

*type int64_elt* =

| Int64_elt

*type int_elt* =

| Int_elt

*type nativeint_elt* =

| Nativeint_elt

*type complex32_elt* =

| Complex32_elt

*type complex64_elt* =

| Complex64_elt

*type* **('a, 'b)** *kind* =

| Float32 **:** **(float, float32_elt) kind**

| Float64 **:** **(float, float64_elt) kind**

| Int8_signed **:** **(int, int8_signed_elt) kind**

| Int8_unsigned **:** **(int, int8_unsigned_elt) kind**

| Int16_signed **:** **(int, int16_signed_elt) kind**

| Int16_unsigned **:** **(int, int16_unsigned_elt) kind**

| Int32 **:** **(int32, int32_elt) kind**

| Int64 **:** **(int64, int64_elt) kind**

| Int **:** **(int, int_elt) kind**

| Nativeint **:** **(nativeint, nativeint_elt) kind**

| Complex32 **:** **(Complex.t, complex32_elt) kind**

| Complex64 **:** **(Complex.t, complex64_elt) kind**

| Char **:** **(char, int8_unsigned_elt) kind**

To each element kind is associated an OCaml type, which is the
type of OCaml values that can be stored in the Bigarray or read back from
it. This type is not necessarily the same as the type of the array elements
proper: for instance, a Bigarray whose elements are of kind
**float32_elt** contains 32-bit single precision floats, but reading or
writing one of its elements from OCaml uses the OCaml type **float** ,
which is 64-bit double precision floats.

The GADT type **('a, 'b) kind** captures this association of an
OCaml type **'a** for values read or written in the Bigarray, and of an
element kind **'b** which represents the actual contents of the Bigarray.
Its constructors list all possible associations of OCaml types with element
kinds, and are re-exported below for backward-compatibility reasons.

Using a generalized algebraic datatype (GADT) here allows writing well-typed polymorphic functions whose return type depend on the argument type, such as:

let zero : type a b. (a, b) kind -> a = function

| Float32 -> 0.0 | Complex32 -> Complex.zero

| Float64 -> 0.0 | Complex64 -> Complex.zero

| Int8_signed -> 0 | Int8_unsigned -> 0

| Int16_signed -> 0 | Int16_unsigned -> 0

| Int32 -> 0l | Int64 -> 0L

| Int -> 0 | Nativeint -> 0n

| Char -> '\000'

*val float32* : **(float, float32_elt) kind**

See **Bigarray.char** .

*val float64* : **(float, float64_elt) kind**

See **Bigarray.char** .

*val complex32* : **(Complex.t, complex32_elt) kind**

See **Bigarray.char** .

*val complex64* : **(Complex.t, complex64_elt) kind**

See **Bigarray.char** .

*val int8_signed* : **(int, int8_signed_elt) kind**

See **Bigarray.char** .

*val int8_unsigned* : **(int, int8_unsigned_elt)
kind**

See **Bigarray.char** .

*val int16_signed* : **(int, int16_signed_elt) kind**

See **Bigarray.char** .

*val int16_unsigned* : **(int, int16_unsigned_elt)
kind**

See **Bigarray.char** .

*val int* : **(int, int_elt) kind**

See **Bigarray.char** .

*val int32* : **(int32, int32_elt) kind**

See **Bigarray.char** .

*val int64* : **(int64, int64_elt) kind**

See **Bigarray.char** .

*val nativeint* : **(nativeint, nativeint_elt) kind**

See **Bigarray.char** .

*val char* : **(char, int8_unsigned_elt) kind**

As shown by the types of the values above, Bigarrays of kind
**float32_elt** and **float64_elt** are accessed using the OCaml type
**float** . Bigarrays of complex kinds **complex32_elt** ,
**complex64_elt** are accessed with the OCaml type **Complex.t** .
Bigarrays of integer kinds are accessed using the smallest OCaml integer
type large enough to represent the array elements: **int** for 8- and
16-bit integer Bigarrays, as well as OCaml-integer Bigarrays; **int32**
for 32-bit integer Bigarrays; **int64** for 64-bit integer Bigarrays; and
**nativeint** for platform-native integer Bigarrays. Finally, Bigarrays
of kind **int8_unsigned_elt** can also be accessed as arrays of
characters instead of arrays of small integers, by using the kind value
**char** instead of **int8_unsigned** .

*val kind_size_in_bytes* : **('a, 'b) kind -> int**

**kind_size_in_bytes k** is the number of bytes used to store
an element of type **k** .

**Since** 4.03.0

## Array layouts¶

*type c_layout* =

| C_layout_typ

See **Bigarray.fortran_layout** .

*type fortran_layout* =

| Fortran_layout_typ

To facilitate interoperability with existing C and Fortran code, this library supports two different memory layouts for Bigarrays, one compatible with the C conventions, the other compatible with the Fortran conventions.

In the C-style layout, array indices start at 0, and
multi-dimensional arrays are laid out in row-major format. That is, for a
two-dimensional array, all elements of row 0 are contiguous in memory,
followed by all elements of row 1, etc. In other terms, the array elements
at **(x,y)** and **(x, y+1)** are adjacent in memory.

In the Fortran-style layout, array indices start at 1, and
multi-dimensional arrays are laid out in column-major format. That is, for a
two-dimensional array, all elements of column 0 are contiguous in memory,
followed by all elements of column 1, etc. In other terms, the array
elements at **(x,y)** and **(x+1, y)** are adjacent in memory.

Each layout style is identified at the type level by the phantom
types **Bigarray.c_layout** and **Bigarray.fortran_layout**
respectively.

## Supported layouts¶

The GADT type **'a layout** represents one of the two supported
memory layouts: C-style or Fortran-style. Its constructors are re-exported
as values below for backward-compatibility reasons.

*type* **'a** *layout* =

| C_layout **:** **c_layout layout**

| Fortran_layout **:** **fortran_layout layout**

*val c_layout* : **c_layout layout**

*val fortran_layout* : **fortran_layout layout**

## Generic arrays (of arbitrarily many dimensions)¶

*module Genarray :* **sig end**

## Zero-dimensional arrays¶

*module Array0 :* **sig end**

Zero-dimensional arrays. The **Array0** structure provides
operations similar to those of **Bigarray.Genarray** , but specialized to
the case of zero-dimensional arrays that only contain a single scalar value.
Statically knowing the number of dimensions of the array allows faster
operations, and more precise static type-checking.

**Since** 4.05.0

## One-dimensional arrays¶

*module Array1 :* **sig end**

One-dimensional arrays. The **Array1** structure provides
operations similar to those of **Bigarray.Genarray** , but specialized to
the case of one-dimensional arrays. (The **Bigarray.Array2** and
**Bigarray.Array3** structures below provide operations specialized for
two- and three-dimensional arrays.) Statically knowing the number of
dimensions of the array allows faster operations, and more precise static
type-checking.

## Two-dimensional arrays¶

*module Array2 :* **sig end**

Two-dimensional arrays. The **Array2** structure provides
operations similar to those of **Bigarray.Genarray** , but specialized to
the case of two-dimensional arrays.

## Three-dimensional arrays¶

*module Array3 :* **sig end**

Three-dimensional arrays. The **Array3** structure provides
operations similar to those of **Bigarray.Genarray** , but specialized to
the case of three-dimensional arrays.

## Coercions between generic Bigarrays and fixed-dimension Bigarrays¶

*val genarray_of_array0* : **('a, 'b, 'c) Array0.t ->
('a, 'b, 'c) Genarray.t**

Return the generic Bigarray corresponding to the given zero-dimensional Bigarray.

**Since** 4.05.0

*val genarray_of_array1* : **('a, 'b, 'c) Array1.t ->
('a, 'b, 'c) Genarray.t**

Return the generic Bigarray corresponding to the given one-dimensional Bigarray.

*val genarray_of_array2* : **('a, 'b, 'c) Array2.t ->
('a, 'b, 'c) Genarray.t**

Return the generic Bigarray corresponding to the given two-dimensional Bigarray.

*val genarray_of_array3* : **('a, 'b, 'c) Array3.t ->
('a, 'b, 'c) Genarray.t**

Return the generic Bigarray corresponding to the given three-dimensional Bigarray.

*val array0_of_genarray* : **('a, 'b, 'c) Genarray.t ->
('a, 'b, 'c) Array0.t**

Return the zero-dimensional Bigarray corresponding to the given generic Bigarray.

**Since** 4.05.0

**Raises Invalid_argument** if the generic Bigarray does not
have exactly zero dimension.

*val array1_of_genarray* : **('a, 'b, 'c) Genarray.t ->
('a, 'b, 'c) Array1.t**

Return the one-dimensional Bigarray corresponding to the given generic Bigarray.

**Raises Invalid_argument** if the generic Bigarray does not
have exactly one dimension.

*val array2_of_genarray* : **('a, 'b, 'c) Genarray.t ->
('a, 'b, 'c) Array2.t**

Return the two-dimensional Bigarray corresponding to the given generic Bigarray.

**Raises Invalid_argument** if the generic Bigarray does not
have exactly two dimensions.

*val array3_of_genarray* : **('a, 'b, 'c) Genarray.t ->
('a, 'b, 'c) Array3.t**

Return the three-dimensional Bigarray corresponding to the given generic Bigarray.

**Raises Invalid_argument** if the generic Bigarray does not
have exactly three dimensions.

## Re-shaping Bigarrays¶

*val reshape* : **('a, 'b, 'c) Genarray.t ->** **int
array -> ('a, 'b, 'c) Genarray.t**

**reshape b [|d1;...;dN|]** converts the Bigarray **b** to a
**N** -dimensional array of dimensions **d1** ... **dN** . The
returned array and the original array **b** share their data and have the
same layout. For instance, assuming that **b** is a one-dimensional array
of dimension 12, **reshape b [|3;4|]** returns a two-dimensional array
**b'** of dimensions 3 and 4. If **b** has C layout, the element
**(x,y)** of **b'** corresponds to the element **x * 3 + y** of
**b** . If **b** has Fortran layout, the element **(x,y)** of
**b'** corresponds to the element **x + (y - 1) * 4** of **b** .
The returned Bigarray must have exactly the same number of elements as the
original Bigarray **b** . That is, the product of the dimensions of
**b** must be equal to **i1 * ... * iN** . Otherwise,
**Invalid_argument** is raised.

*val reshape_0* : **('a, 'b, 'c) Genarray.t -> ('a, 'b,
'c) Array0.t**

Specialized version of **Bigarray.reshape** for reshaping to
zero-dimensional arrays.

**Since** 4.05.0

*val reshape_1* : **('a, 'b, 'c) Genarray.t -> int ->
('a, 'b, 'c) Array1.t**

Specialized version of **Bigarray.reshape** for reshaping to
one-dimensional arrays.

*val reshape_2* : **('a, 'b, 'c) Genarray.t ->** **int
-> int -> ('a, 'b, 'c) Array2.t**

Specialized version of **Bigarray.reshape** for reshaping to
two-dimensional arrays.

*val reshape_3* : **('a, 'b, 'c) Genarray.t ->** **int
-> int -> int -> ('a, 'b, 'c) Array3.t**

Specialized version of **Bigarray.reshape** for reshaping to
three-dimensional arrays.

2023-09-18 | OCamldoc |