Scroll to navigation

Pbmtoepson User Manual(1) General Commands Manual Pbmtoepson User Manual(1)

NAME

pbmtoepson - convert a PBM image into Epson printer graphics

SYNOPSIS

pbmtoepson

[-dpi=n] [-protocol={escp9|escp}] [-adjacent] [-nonadjacent]

[pbmfile]

DESCRIPTION

This program is part of Netpbm(1).

pbmtoepson reads a PBM image as input and produces a stream of Epson printer graphics as output.

The input is from the file identified by the pbmfile argument or, if you don't specify pbmfile, from Standard Input. Output is to Standard Output.

The output is for traditional (ca 1991) Epson 9-wire dot matrix (sometimes called ESC/P 9-wire) printers or newer ESC/P printers. For a more modern Epson ESC/P2 type printer, try pbmtoescp2.

Before Netpbm 10.23 (July 2004), pbmtoepson could not produce ESC/P streams -- only ESC/P 9-wire.

The Epson printer protocols are described in Epson's protocol specification.

Note that there is no epsontopbm tool - this transformation is one way.

OPTIONS

In addition to the options common to all programs based on libnetpbm (most notably -quiet, see
Common Options
), pbmtoepson recognizes the following command line options:

This determines which Epson printer protocol the output uses. escp9 is the older ESC/P 9-pin protocol. escp is the newer ESC/P protocol. For the even newer ESC/P2 protocol, you have to use pbmtoescp2 instead.

This option was new in Netpbm 10.23 (July 2004).

This specifies the horizontal print density in dots per inch. The protocol allows only certain values: 60, 72, 80, 90, 120, 144, and 240. Actually, the ESC/P protocol allows a few others, but pbmtoepson doesn't know how to generate the command streams that use them.

If you don't specify this, pbmtoepson chooses a horizontal print density for you consistent with your other options.

This option was new in Netpbm 10.23 (July 2004).

These options determine whether the output uses "adjacent dot printing" or not, whatever that is.

If you don't specify this, pbmtoepson selects adjacent dot printing unless that is incompatible with your other options.

This option was new in Netpbm 10.23 (July 2004).

SEE ALSO

pbmtoescp2(1), pbm(1),

AUTHOR

Copyright (C) 1991 by John Tiller (tiller@galois.msfc.nasa.gov) and Jef Poskanzer.

DOCUMENT SOURCE

This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master documentation is at

http://netpbm.sourceforge.net/doc/pbmtoepson.html
08 August 2003 netpbm documentation