URL

A URL to attempt to extract streams from.

Usually, the protocol of http(s) URLs can be omitted ("https://"), depending on the implementation of the plugin being used.

Alternatively, the URL can also be specified by using the --url option.

STREAM

Stream to play.

Use best or worst for selecting the highest or lowest available quality.

Fallback streams can be specified by using a comma-separated list:

"720p,480p,best"

If no stream is specified and --default-stream is not used, then a list of available streams will be printed.

-h

--help

Show this help message and exit.

-V

--version

Show version number and exit.

--plugins

Print a list of all currently installed plugins.

--plugin-dirs DIRECTORY

Attempts to load plugins from these directories.

Multiple directories can be used by separating them with a comma.

--can-handle-url URL

Check if Streamlink has a plugin that can handle the specified URL.

Returns status code 1 for false and 0 for true.

Useful for external scripting.

--can-handle-url-no-redirect URL

Same as --can-handle-url but without following redirects when looking up the URL.

--config FILENAME

Load options from this config file.

Can be repeated to load multiple files, in which case the options are merged on top of each other where the last config has highest priority.

-l LEVEL

--loglevel LEVEL

Set the log message threshold.

Valid levels are: none, error, warning, info, debug, trace

--logfile FILE

Append log output to FILE instead of writing to stdout/stderr.

User prompts and download progress won't be written to FILE.

A value of - will set the file name to an ISO8601-like string and will choose the following default log directories.

Windows:

%TEMP%\streamlink\logs

macOS:

${HOME}/Library/Logs/streamlink

Linux/BSD:

${XDG_STATE_HOME:-${HOME}/.local/state}/streamlink/logs

-Q

--quiet

Hide all log output.

Alias for "--loglevel none".

-j

--json

Output JSON representations instead of the normal text output.

Useful for external scripting.

--auto-version-check {yes,true,1,on,no,false,0,off}

Enable or disable the automatic check for a new version of Streamlink.

Default is: "no".

--version-check

Runs a version check and exits.

--locale LOCALE

The preferred locale setting, for selecting the preferred subtitle and audio language.

The locale is formatted as [language_code]_[country_code], eg. en_US or es_ES.

Default is: system locale.

--interface INTERFACE

Set the network interface.

-4

--ipv4

Resolve address names to IPv4 only. This option overrides -6.

-6

--ipv6

Resolve address names to IPv6 only. This option overrides -4.

-p COMMAND

--player COMMAND

Player to feed stream data to. By default, VLC will be used if it can be found in its default location.

This is a shell-like syntax to support using a specific player:

streamlink --player=vlc <url> [stream]

Absolute or relative paths can also be passed via this option in the event the player's executable can not be resolved:

streamlink --player=/path/to/vlc <url> [stream]
streamlink --player=./vlc-player/vlc <url> [stream]

To use a player that is located in a path with spaces you must quote the parameter or its value:

streamlink "--player=/path/with spaces/vlc" <url> [stream]
streamlink --player "C:\path\with spaces\mpc-hc64.exe" <url> [stream]

Options may also be passed to the player. For example:

streamlink --player "vlc --file-caching=5000" <url> [stream]

As an alternative to this, see the --player-args parameter, which does not log any custom player arguments.

-a ARGUMENTS

--player-args ARGUMENTS

This option allows you to customize the default arguments which are put together with the value of --player to create a command to execute.

It's usually enough to only use --player instead of this unless you need to add arguments after the player's input argument or if you don't want any of the player arguments to be logged.

The value can contain formatting variables surrounded by curly braces, { and }. If you need to include a brace character, it can be escaped by doubling, e.g. {{ and }}.

Formatting variables available:

Example:

streamlink -p vlc -a "--play-and-exit {playerinput}" <url> [stream]

NOTE:

-v

--verbose-player

Allow the player to display its console output.

-n

--player-fifo

--fifo

Make the player read the stream through a named pipe instead of the stdin pipe.

--player-http

Make the player read the stream through HTTP instead of the stdin pipe.

--player-continuous-http

Make the player read the stream through HTTP, but unlike --player-http it will continuously try to open the stream if the player requests it.

This makes it possible to handle stream disconnects if your player is capable of reconnecting to a HTTP stream. This is usually done by setting your player to a "repeat mode".

--player-external-http

Serve stream data through HTTP without running any player. This is useful to allow external devices like smartphones or streaming boxes to watch streams they wouldn't be able to otherwise.

Behavior will be similar to the continuous HTTP option, but no player program will be started, and the server will listen on all available connections instead of just in the local (loopback) interface.

The URLs that can be used to access the stream will be printed to the console, and the server can be interrupted using CTRL-C.

--player-external-http-port PORT

A fixed port to use for the external HTTP server if that mode is enabled. Omit or set to 0 to use a random high ( >1024) port.

--player-passthrough TYPES

A comma-delimited list of stream types to pass to the player as a URL to let it handle the transport of the stream instead.

Stream types that can be converted into a playable URL are:

Make sure your player can handle the stream type when using this.

--player-no-close

By default Streamlink will close the player when the stream ends. This is to avoid "dead" GUI players lingering after a stream ends.

It does however have the side-effect of sometimes closing a player before it has played back all of its cached data.

This option will instead let the player decide when to exit.

-t TITLE

--title TITLE

This option allows you to supply a title to be displayed in the title bar of the window that the video player is launched in.

This value can contain formatting variables surrounded by curly braces, { and }. If you need to include a brace character, it can be escaped by doubling, e.g. {{ and }}.

This option is only supported for the following players: mpv, potplayer, vlc.

Formatting variables available to use in --title:

Examples:

streamlink -p vlc --title "{title} -!- {author} -!- {category} \$A" <url> [stream]
streamlink -p mpv --title "{title} -- {author} -- {category} -- (\${{mpv-version}})" <url> [stream]

-o FILENAME

--output FILENAME

Write stream data to FILENAME instead of playing it.

You will be prompted if the file already exists.

-f

--force

When using -o or -r, always write to file even if it already exists.

--force-progress

When using -o or -r, show the download progress bar even if there is no terminal.

-O

--stdout

Write stream data to stdout instead of playing it.

-r FILENAME

--record FILENAME

Open the stream in the player, while at the same time writing it to FILENAME.

You will be prompted if the file already exists.

-R FILENAME

--record-and-pipe FILENAME

Write stream data to stdout, while at the same time writing it to FILENAME.

You will be prompted if the file already exists.

--url URL

A URL to attempt to extract streams from.

Usually, the protocol of http(s) URLs can be omitted (https://), depending on the implementation of the plugin being used.

This is an alternative to setting the URL using a positional argument and can be useful if set in a config file.

--default-stream STREAM

Stream to play.

Use best or worst for selecting the highest or lowest available quality.

Fallback streams can be specified by using a comma-separated list:

"720p,480p,best"

This is an alternative to setting the stream using a positional argument and can be useful if set in a config file.

--stream-url

If possible, translate the resolved stream to a URL and print it.

--retry-streams DELAY

Retry fetching the list of available streams until streams are found while waiting DELAY second(s) between each attempt. If unset, only one attempt will be made to fetch the list of streams available.

The number of fetch retry attempts can be capped with --retry-max.

--retry-max COUNT

When using --retry-streams, stop retrying the fetch after COUNT retry attempt(s). Fetch will retry infinitely if COUNT is zero or unset.

If --retry-max is set without setting --retry-streams, the delay between retries will default to 1 second.

--retry-open ATTEMPTS

After a successful fetch, try ATTEMPTS time(s) to open the stream until giving up.

Default is: 1.

--stream-types TYPES

--stream-priority TYPES

A comma-delimited list of stream types to allow.

The order will be used to separate streams when there are multiple streams with the same name but different stream types. Any stream type not listed will be omitted from the available streams list. A * can be used as a wildcard to match any other type of stream, eg. muxed-stream.

Default is: "rtmp,hls,hds,http,akamaihd,*".

--stream-sorting-excludes STREAMS

Fine tune the best and worst stream name synonyms by excluding unwanted streams.

If all of the available streams get excluded, best and worst will become inaccessible and new special stream synonyms best-unfiltered and worst-unfiltered can be used as a fallback selection method.

Uses a filter expression in the format:

[operator]<value>

Valid operators are >, >=, < and <=. If no operator is specified then equality is tested.

For example this will exclude streams ranked higher than "480p":

">480p"

Multiple filters can be used by separating each expression with a comma.

For example this will exclude streams from two quality types:

">480p,>medium"

--hds-live-edge SECONDS

The time live HDS streams will start from the edge of stream.

Default is: 10.0.

--hds-segment-attempts ATTEMPTS

How many attempts should be done to download each HDS segment before giving up.

Default is: 3.

--hds-segment-threads THREADS

The size of the thread pool used to download HDS segments. Minimum value is 1 and maximum is 10.

Default is: 1.

--hds-segment-timeout TIMEOUT

HDS segment connect and read timeout.

Default is: 10.0.

--hds-timeout TIMEOUT

Timeout for reading data from HDS streams.

Default is: 60.0.

--hls-live-edge SEGMENTS

How many segments from the end to start live HLS streams on.

The lower the value the lower latency from the source you will be, but also increases the chance of buffering.

Default is: 3.

--hls-segment-stream-data

Immediately write segment data into output buffer while downloading.

--hls-segment-attempts ATTEMPTS

How many attempts should be done to download each HLS segment before giving up.

Default is: 3.

--hls-playlist-reload-attempts ATTEMPTS

How many attempts should be done to reload the HLS playlist before giving up.

Default is: 3.

--hls-playlist-reload-time TIME

Set a custom HLS playlist reload time value, either in seconds or by using one of the following keywords:

segment: The duration of the last segment in the current playlist
live-edge: The sum of segment durations of the live edge value minus one
default: The playlist's target duration metadata

Default is: default.

--hls-segment-threads THREADS

The size of the thread pool used to download HLS segments. Minimum value is 1 and maximum is 10.

Default is: 1.

--hls-segment-timeout TIMEOUT

HLS segment connect and read timeout.

Default is: 10.0.

--hls-segment-ignore-names NAMES

A comma-delimited list of segment names that will get filtered out.

Example: --hls-segment-ignore-names 000,001,002

This will ignore every segment that ends with 000.ts, 001.ts and 002.ts

Default is: None.

--hls-segment-key-uri URI

URI to segment encryption key. If no URI is specified, the URI contained in the segments will be used.

URI can be templated using the following variables, which will be replaced with its respective part from the source segment URI:

{url} {scheme} {netloc} {path} {query}

Examples:

--hls-segment-key-uri "https://example.com/hls/encryption_key"
--hls-segment-key-uri "{scheme}://1.2.3.4{path}{query}"
--hls-segment-key-uri "{scheme}://{netloc}/custom/path/to/key"

Default is: None.

--hls-audio-select CODE

Selects a specific audio source or sources, by language code or name, when multiple audio sources are available. Can be * to download all audio sources.

Examples:

--hls-audio-select "English,German"
--hls-audio-select "en,de"
--hls-audio-select "*"

NOTE:

--hls-timeout TIMEOUT

Timeout for reading data from HLS streams.

Default is: 60.0.

--hls-start-offset [HH:]MM:SS

Amount of time to skip from the beginning of the stream. For live streams, this is a negative offset from the end of the stream (rewind).

Default is: 00:00:00.

--hls-duration [HH:]MM:SS

Limit the playback duration, useful for watching segments of a stream. The actual duration may be slightly longer, as it is rounded to the nearest HLS segment.

Default is: unlimited.

--hls-live-restart

Skip to the beginning of a live stream, or as far back as possible.

--http-stream-timeout TIMEOUT

Timeout for reading data from HTTP streams.

Default is: 60.0.

--ringbuffer-size SIZE

The maximum size of ringbuffer. Add a M or K suffix to specify mega or kilo bytes instead of bytes.

The ringbuffer is used as a temporary storage between the stream and the player. This is to allows us to download the stream faster than the player wants to read it.

The smaller the size, the higher chance of the player buffering if there are download speed dips and the higher size the more data we can use as a storage to catch up from speed dips.

It also allows you to temporary pause as long as the ringbuffer doesn't get full since we continue to download the stream in the background.

Default is: "16M".

NOTE:

--rtmp-proxy PROXY

A SOCKS proxy that RTMP streams will use.

Example: 127.0.0.1:9050

--rtmp-rtmpdump FILENAME

RTMPDump is used to access RTMP streams. You can specify the location of the rtmpdump executable if it is not in your PATH.

Example: "/usr/local/bin/rtmpdump"

--rtmp-timeout TIMEOUT

Timeout for reading data from RTMP streams.

Default is: 60.0.

--stream-segment-attempts ATTEMPTS

How many attempts should be done to download each segment before giving up.

This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.

Default is: 3.

--stream-segment-threads THREADS

The size of the thread pool used to download segments. Minimum value is 1 and maximum is 10.

This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.

Default is: 1.

--stream-segment-timeout TIMEOUT

Segment connect and read timeout.

This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.

Default is: 10.0.

--stream-timeout TIMEOUT

Timeout for reading data from streams.

This is generic option used by streams not covered by other options, such as stream protocols specific to plugins, e.g. UStream.

Default is: 60.0.

--subprocess-cmdline

Print the command-line used internally to play the stream.

This is only available on RTMP streams.

--subprocess-errorlog

Log possible errors from internal subprocesses to a temporary file. The file will be saved in your systems temporary directory.

Useful when debugging rtmpdump related issues.

--subprocess-errorlog-path PATH

Log the subprocess errorlog to a specific file rather than a temporary file. Takes precedence over subprocess-errorlog.

Useful when debugging rtmpdump related issues.

--ffmpeg-ffmpeg FILENAME

FFMPEG is used to access or mux separate video and audio streams. You can specify the location of the ffmpeg executable if it is not in your PATH.

Example: "/usr/local/bin/ffmpeg"

--ffmpeg-verbose

Write the console output from ffmpeg to the console.

--ffmpeg-verbose-path PATH

Path to write the output from the ffmpeg console.

--ffmpeg-fout OUTFORMAT

When muxing streams, set the output format to OUTFORMAT.

Default is: "matroska".

Example: "mpegts"

--ffmpeg-video-transcode CODEC

When muxing streams, transcode the video to CODEC.

Default is: "copy".

Example: "h264"

--ffmpeg-audio-transcode CODEC

When muxing streams, transcode the audio to CODEC.

Default is: "copy".

Example: "aac"

--ffmpeg-copyts

Forces the -copyts ffmpeg option and does not remove the initial start time offset value.

--ffmpeg-start-at-zero

Enable the -start_at_zero ffmpeg option when using copyts.

--mux-subtitles

Automatically mux available subtitles into the output stream.

Needs to be supported by the used plugin.

Supported plugins: funimationnow, pluzz, rtve, svtplay, vimeo

--http-proxy HTTP_PROXY

A HTTP proxy to use for all HTTP requests, including WebSocket connections. By default this proxy will be used for all HTTPS requests too.

Example: "http://hostname:port/"

--https-proxy HTTPS_PROXY

A HTTPS capable proxy to use for all HTTPS requests.

Example: "https://hostname:port/"

--http-cookie KEY=VALUE

A cookie to add to each HTTP request.

Can be repeated to add multiple cookies.

--http-header KEY=VALUE

A header to add to each HTTP request.

Can be repeated to add multiple headers.

--http-query-param KEY=VALUE

A query parameter to add to each HTTP request.

Can be repeated to add multiple query parameters.

--http-ignore-env

Ignore HTTP settings set in the environment such as environment variables (HTTP_PROXY, etc) or ~/.netrc authentication.

--http-no-ssl-verify

Don't attempt to verify SSL certificates.

Usually a bad idea, only use this if you know what you're doing.

--http-disable-dh

Disable Diffie Hellman key exchange

Usually a bad idea, only use this if you know what you're doing.

--http-ssl-cert FILENAME

SSL certificate to use.

Expects a .pem file.

--http-ssl-cert-crt-key CRT_FILENAME KEY_FILENAME

SSL certificate to use.

Expects a .crt and a .key file.

--http-timeout TIMEOUT

General timeout used by all HTTP requests except the ones covered by other options.

Default is: 20.0.