Scroll to navigation

PERF_4.10-TRACE(1) perf Manual PERF_4.10-TRACE(1)

NAME

perf-trace - strace inspired tool

SYNOPSIS

perf trace
perf trace record

DESCRIPTION

This command will show the events associated with the target, initially syscalls, but other system events like pagefaults, task lifetime events, scheduling events, etc.

This is a live mode tool in addition to working with perf.data files like the other perf tools. Files can be generated using the perf record command but the session needs to include the raw_syscalls events (-e raw_syscalls:*). Alternatively, perf trace record can be used as a shortcut to automatically include the raw_syscalls events when writing events to a file.

The following options apply to perf trace; options to perf trace record are found in the perf record man page.

OPTIONS

-a, --all-cpus

System-wide collection from all CPUs.

-e, --expr

List of syscalls to show, currently only syscall names. Prefixing with ! shows all syscalls but the ones specified. You may need to escape it.

-D msecs, --delay msecs

After starting the program, wait msecs before measuring. This is useful to filter out the startup phase of the program, which is often very different.

-o, --output=

Output file name.

-p, --pid=

Record events on existing process ID (comma separated list).

-t, --tid=

Record events on existing thread ID (comma separated list).

-u, --uid=

Record events in threads owned by uid. Name or number.

--filter-pids=

Filter out events for these pids and for trace itself (comma separated list).

-v, --verbose=

Verbosity level.

--no-inherit

Child tasks do not inherit counters.

-m, --mmap-pages=

Number of mmap data pages (must be a power of two) or size specification with appended unit character - B/K/M/G. The size is rounded up to have nearest pages power of two value.

-C, --cpu

Collect samples only on the list of CPUs provided. Multiple CPUs can be provided as a comma-separated list with no space: 0,1. Ranges of CPUs are specified with -: 0-2. In per-thread mode with inheritance mode on (default), Events are captured only when the thread executes on the designated CPUs. Default is to monitor all CPUs.

--duration: Show only events that had a duration greater than N.M ms.

--sched: Accrue thread runtime and provide a summary at the end of the session.

-i --input Process events from a given perf data file.

-T --time Print full timestamp rather time relative to first sample.

--comm

Show process COMM right beside its ID, on by default, disable with --no-comm.

-s, --summary

Show only a summary of syscalls by thread with min, max, and average times (in msec) and relative stddev.

-S, --with-summary

Show all syscalls followed by a summary by thread with min, max, and average times (in msec) and relative stddev.

--tool_stats

Show tool stats such as number of times fd→pathname was discovered thru hooking the open syscall return + vfs_getname or via reading /proc/pid/fd, etc.

-F=[all|min|maj], --pf=[all|min|maj]

Trace pagefaults. Optionally, you can specify whether you want minor, major or all pagefaults. Default value is maj.

--syscalls

Trace system calls. This options is enabled by default.

--call-graph [mode,type,min[,limit],order[,key][,branch]]

Setup and enable call-graph (stack chain/backtrace) recording. See --call-graph section in perf-record and perf-report man pages for details. The ones that are most useful in perf trace are dwarf and lbr, where available, try: perf trace --call-graph dwarf.

Using this will, for the root user, bump the value of --mmap-pages to 4
times the maximum for non-root users, based on the kernel.perf_event_mlock_kb
sysctl. This is done only if the user doesn't specify a --mmap-pages value.

--kernel-syscall-graph

Show the kernel callchains on the syscall exit path.

--event

Trace other events, see perf list for a complete list.

--max-stack

Set the stack depth limit when parsing the callchain, anything beyond the specified depth will be ignored. Note that at this point this is just about the presentation part, i.e. the kernel is still not limiting, the overhead of callchains needs to be set via the knobs in --call-graph dwarf.

Implies '--call-graph dwarf' when --call-graph not present on the
command line, on systems where DWARF unwinding was built in.

Default: /proc/sys/kernel/perf_event_max_stack when present for

live sessions (without --input/-i), 127 otherwise.

--min-stack

Set the stack depth limit when parsing the callchain, anything below the specified depth will be ignored. Disabled by default.

Implies '--call-graph dwarf' when --call-graph not present on the
command line, on systems where DWARF unwinding was built in.

--proc-map-timeout

When processing pre-existing threads /proc/XXX/mmap, it may take a long time, because the file may be huge. A time out is needed in such cases. This option sets the time out limit. The default value is 500 ms.

PAGEFAULTS

When tracing pagefaults, the format of the trace is as follows:

<min|maj>fault [<ip.symbol>+<ip.offset>] ⇒ <addr.dso@addr.offset[1]> (<map type><addr level>).

•min/maj indicates whether fault event is minor or major;

•ip.symbol shows symbol for instruction pointer (the code that generated the fault); if no debug symbols available, perf trace will print raw IP;

•addr.dso shows DSO for the faulted address;

•map type is either d for non-executable maps or x for executable maps;

•addr level is either k for kernel dso or . for user dso.

For symbols resolution you may need to install debugging symbols.

Please be aware that duration is currently always 0 and doesn’t reflect actual time it took for fault to be handled!

When --verbose specified, perf trace tries to print all available information for both IP and fault address in the form of dso@symbol[2]+offset.

EXAMPLES

Trace only major pagefaults:

$ perf trace --no-syscalls -F

Trace syscalls, major and minor pagefaults:

$ perf trace -F all

1416.547 ( 0.000 ms): python/20235 majfault [CRYPTO_push_info_+0x0] => /lib/x86_64-linux-gnu/libcrypto.so.1.0.0@0x61be0 (x.)

As you can see, there was major pagefault in python process, from
CRYPTO_push_info_ routine which faulted somewhere in libcrypto.so.

SEE ALSO

perf_4.10-record(1), perf_4.10-script(1)

NOTES

1.
addr.dso@addr.offset
mailto:addr.dso@addr.offset
2.
dso@symbol
mailto:dso@symbol
2017-03-30 perf