Scroll to navigation

Config::Model::Backend::Any(3pm) User Contributed Perl Documentation Config::Model::Backend::Any(3pm)

NAME

Config::Model::Backend::Any - Virtual class for other backends

VERSION

version 2.105

SYNOPSIS

 package Config::Model::Backend::Foo ;
 use Mouse ;
 extends 'Config::Model::Backend::Any';
 # optional
 sub suffix {
   return '.conf';
 }
 # mandatory
 sub read {
    my $self = shift ;
    my %args = @_ ;
    # args are:
    # root       => './my_test',  # fake root directory, used for tests
    # config_dir => /etc/foo',    # absolute path
    # file       => 'foo.conf',   # file name
    # file_path  => './my_test/etc/foo/foo.conf'
    # io_handle  => $io           # IO::File object opened for read
    # check      => yes|no|skip
    return 0 unless defined $args{io_handle} ; # or die, your choice
    # read the file line by line
    # we assume the file contain lines like 'key=value'
    foreach ($args{io_handle}->getlines) {
        chomp ;   # remove trailing \n
        s/#.*// ; # remove any comment
        next unless /\S/; # skip blank line
        # $data is 'foo=bar' which is compatible with load 
        $self->node->load(steps => $_, check => $args{check} ) ;
    }
    return 1 ;
 }
 # mandatory
 sub write {
    my $self = shift ;
    my %args = @_ ;
    # args are:
    # root       => './my_test',  # fake root directory, used for tests
    # config_dir => /etc/foo',    # absolute path 
    # file       => 'foo.conf',   # file name
    # file_path  => './my_test/etc/foo/foo.conf'
    # io_handle  => $io           # IO::File object opened for write
    # check      => yes|no|skip
    my $ioh = $args{io_handle} ;
    # read the content of the configuration tree
    foreach my $elt ($self->node->children) {
        # read the value from element $elt
        my $v = $self->node->grab_value($elt) ;
        # write value in file
        $ioh->print(qq!$elt="$v"\n!) if defined $v ;
    }
    return 1;
 }

DESCRIPTION

Some application have configuration files with a syntax which is not supported by existing "Config::Model::Backend::*" classes.

In this case a new backend must be written. "Config::Model::Backend::Any" was created to facilitate this task.

The new backend class must use Mouse and must extends (inherit) "Config::Model::Backend::Any".

How to write your own backend

Declare the new backend in a node of the model

As explained in "Backend specification" in Config::Model::BackendMgr, the new backend must be declared as an attribute of a Config::Model::Node specification.

Let's say your new backend is "Config::Model::Backend::Foo". This new backend can be specified with:

 read_config  => [ {
    backend    => 'Foo' , # can also be 'foo'
    config_dir => '/etc/cfg_dir'
    file       => 'foo.conf', # optional
 }]

(The backend class name is constructed with "ucfirst($backend_name)")

"read_config" can also have custom parameters that are passed verbatim to "Config::Model::Backend::Foo" methods:

 read_config  => [ {
    backend    => 'Foo' , # can also be 'foo'
    config_dir => '/etc/cfg_dir'
    file       => 'foo.conf', # optional
    my_param   => 'my_value',
 } ]

"Config::Model::Backend::Foo" class must inherit (extend) Config::Model::Backend::Any and is expected to provide the following methods:

"read()" is called with the following parameters:

 %custom_parameters,       # e.g. my_param   => 'my_value' in the example above
 object     => $obj,         # Config::Model::Node object
 root       => $root_dir,  # fake root directory, used for tests
 backend    => $backend,   # backend name
 config_dir => $read_dir,  # path below root
 file       => 'foo.conf',   # file name
 file_path  => $full_name, # full file name (root+path+file)
 io_handle  => $io_file    # IO::File object opened for read
 check      => [yes|no|skip]
    

The IO::File object is undef if the file cannot be read.

This method must return 1 if the read was successful, 0 otherwise.

Following the "my_param" example above, %custom_parameters contains " ( 'my_param' , 'my_value' ) ", so "read()" is called with "root", "config_dir", "file_path", "io_handle" and "my_param => 'my_value'".

"write()" is called with the following parameters:

 %$custom_parameters,         # e.g. my_param   => 'my_value' in the example above
 object      => $obj,         # Config::Model::Node object
 root        => $root_dir,    # fake root directory, used for tests
 auto_create => $auto_create, # boolean specified in backend declaration
 auto_delete => $auto_delete, # boolean specified in backend declaration
 backend     => $backend,     # backend name
 config_dir  => $write_dir,   # override from instance
 file        => 'foo.conf',   # file name
 file_path   => $full_name, # full file name (root+path+file)
 io_handle   => $fh,          # IO::File object
 write       => 1,            # always
 check       => [ yes|no|skip] ,
 backup      => [ undef || '' || suffix ] # backup strategy required by user
    

The IO::File object is undef if the file cannot be written to.

This method must return 1 if the write was successful, 0 otherwise

If "io_handle" is defined, the backup has already been done before opening the config file. If "io_handle" is not defined, there's not enough information in the model to read the configuration file and create the backup. Your "write()" method will have to do the backup requested by user.

When both "config_dir" and "file" are specified, the backend manager opens the configuration file for write (and thus clobbers it) before calling the "write" call-back with the file handle with "io_handle" parameter. "write" should use this handle to write data in the target configuration file.

If this behavior causes problem, the solution is to override "skip_open" method in your backend to return 1.

How to test your new backend

Using Config::Model::Tester, you can test your model with your backend following the instructions given in Config::Model::Tester.

You can also test your backend with a minimal model (and Config::Model::Tester). In this case, you need to specify a small model to test in a "*-test-conf.pl" file. See the IniFile backend test <https://github.com/dod38fr/config-model/blob/master/t/model_tests.d/backend-ini-test-conf.pl> for an example and its examples files <https://github.com/dod38fr/config-model/tree/master/t/model_tests.d/backend-ini-examples>.

CONSTRUCTOR

new ( node => $node_obj, name => backend_name )

The constructor should be used only by Config::Model::Node.

Methods to override

annotation

Whether the backend supports reading and writing annotation (a.k.a comments). Default is 0. Override this method to return 1 if your backend supports annotations.

suffix

Suffix of the configuration file. This method returns "undef" by default.

read

Read the configuration file. This method must be overridden.

write

Write the configuration file. This method must be overridden.

Methods

node

Return the node (a Config::Model::Node) holding this backend.

instance

Return the instance (a Config::Model::Instance) holding this configuration.

show_message( string )

Show a message to STDOUT (unless overridden). Delegated to "show_message( string )" in Config::Model::Instance.

read_global_comments

Parameters:

  • array ref of string containing the lines to be parsed
  • A string to specify how a comment is started. Each character is recognized as a comment starter (e.g '"#;"' allow a comment to begin with '"#"' or '";"')

Read the global comments (i.e. the first block of comments until the first blank or non comment line) and store them as root node annotation.

Example:

 $self->read_global_comments( \@lines, ';');
 $self->read_global_comments( \@lines, '#;');

associates_comments_with_data

Parameters:

  • array ref of string containing the lines to be parsed
  • A string to specify how a comment is started. Each character is recognized as a comment starter (e.g '"#;"' allow a comment to begin with '"#"' or '";"')

This method extracts comments from the passed lines and associate them with actual data found in the file lines. Data is associated with comments preceding or on the same line as the data. Returns a list of [ data, comment ].

Example:

  my @lines = (
    '# Foo comments',
    'foo= 1',
    'Baz = 0 # Baz comments'
  );
  my @res = $self->associates_comments_with_data( \@lines, '#')
  # @res is:
  # ( [ 'foo= 1', 'Foo comments' ] , [ 'Baz = 0' , 'Baz comments' ] )

write_global_comments( io_handle , comment_char)

Write global comments from configuration root annotation into the io_handle (if defined). Returns the string written to the io_handle.

write_data_and_comments( io_handle , comment_char , data1, comment1, data2, comment2 ...)

Write data and comments in the "io_handle" (if defined). Comments are written before the data. Returns the string written to the io_handle. If a data is undef, the comment is written on its own line.

AUTHOR

Dominique Dumont, (ddumont at cpan dot org)

SEE ALSO

Config::Model, Config::Model::BackendMgr, Config::Model::Node, Config::Model::Backend::Yaml,

AUTHOR

Dominique Dumont

COPYRIGHT AND LICENSE

This software is Copyright (c) 2005-2017 by Dominique Dumont.

This is free software, licensed under:

  The GNU Lesser General Public License, Version 2.1, February 1999
2017-06-09 perl v5.24.1