Scroll to navigation

UHD_SIGGEN_GUI(1) User Commands UHD_SIGGEN_GUI(1)

NAME

uhd_siggen_gui - GNU Radio signal generator using UHD hardware

SYNOPSIS

uhd_siggen_gui: [options]

DESCRIPTION

GUI to allow UHD supported hardware to be a signal generator.

OPTIONS

show this help message and exit
UHD device address args , [default=]
Subdevice of UHD device where appropriate
select Rx Antenna where appropriate
set sample rate (bandwidth) [default=1000000.0]
set gain in dB (default is midpoint)
Set carrier frequency to FREQ [default=mid-point]
Set baseband waveform frequency to FREQ [default=0]
Set 2nd waveform frequency to FREQ [default=none]
Generate a carrier modulated by a complex sine wave
Generate a constant carrier
Set waveform phase offset to OFFSET [default=0]
Generate Gaussian random output
Generate Uniform random output
--2tone
Generate Two Tone signal for IMD testing
Generate a swept sine wave
Set output amplitude to AMPL (0.0-1.0) [default=0.15]
Use verbose console output [default=False]

SEE ALSO

uhd_siggen(1)

2022-12-14 uhd_siggen_gui 3.10.5.0-rc1