.TH UHD_SIGGEN_GUI "1" "2024-04-07" "uhd_siggen_gui 3.10.10.0-rc1" "User Commands"
.SH NAME
uhd_siggen_gui \- GNU Radio signal generator using UHD hardware
.SH SYNOPSIS
.B uhd_siggen_gui:
[\fIoptions\fR]
.SH DESCRIPTION
GUI to allow UHD supported hardware to be a signal generator.
.SH OPTIONS
.TP
\fB\-h\fR, \fB\-\-help\fR
show this help message and exit
.TP
\fB\-a\fR ARGS, \fB\-\-args\fR=\fIARGS\fR
UHD device address args , [default=]
.TP
\fB\-\-spec\fR=\fISPEC\fR
Subdevice of UHD device where appropriate
.TP
\fB\-A\fR ANTENNA, \fB\-\-antenna\fR=\fIANTENNA\fR
select Rx Antenna where appropriate
.TP
\fB\-s\fR SAMP_RATE, \fB\-\-samp\-rate\fR=\fISAMP_RATE\fR
set sample rate (bandwidth) [default=1000000.0]
.TP
\fB\-g\fR GAIN, \fB\-\-gain\fR=\fIGAIN\fR
set gain in dB (default is midpoint)
.TP
\fB\-f\fR FREQ, \fB\-\-tx\-freq\fR=\fIFREQ\fR
Set carrier frequency to FREQ [default=mid\-point]
.TP
\fB\-x\fR WAVEFORM_FREQ, \fB\-\-waveform\-freq\fR=\fIWAVEFORM_FREQ\fR
Set baseband waveform frequency to FREQ [default=0]
.TP
\fB\-y\fR WAVEFORM2_FREQ, \fB\-\-waveform2\-freq\fR=\fIWAVEFORM2_FREQ\fR
Set 2nd waveform frequency to FREQ [default=none]
.TP
\fB\-\-sine\fR
Generate a carrier modulated by a complex sine wave
.TP
\fB\-\-const\fR
Generate a constant carrier
.TP
\fB\-\-offset\fR=\fIOFFSET\fR
Set waveform phase offset to OFFSET [default=0]
.TP
\fB\-\-gaussian\fR
Generate Gaussian random output
.TP
\fB\-\-uniform\fR
Generate Uniform random output
.TP
\fB\-\-2tone\fR
Generate Two Tone signal for IMD testing
.TP
\fB\-\-sweep\fR
Generate a swept sine wave
.TP
\fB\-\-amplitude\fR=\fIAMPL\fR
Set output amplitude to AMPL (0.0\-1.0) [default=0.15]
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Use verbose console output [default=False]
.SH "SEE ALSO"
uhd_siggen(1)