Scroll to navigation

UHD_RX_NOGUI(1) User Commands UHD_RX_NOGUI(1)

NAME

uhd_rx_nogui - GNU Radio receiver

SYNOPSIS

uhd_rx_nogui.py [options]

DESCRIPTION

Command line GNU Radio receiver that takes signal from a UHD peripheral receiver and sends demodulated audio to the sound device.

OPTIONS

show this help message and exit
UHD device address args , [default=]
Subdevice of UHD device where appropriate
select Rx Antenna where appropriate [default=none]
set receive frequency to Hz [default=none]
set frequency offset to Hz [default=0.0]
set RF gain [default is midpoint]
set modulation type (AM,FM) [default=none]
set audio output rate to RATE [default=32000]
set RF squelch to dB [default=-50.0]
set CTCSS squelch to FREQ [default=none]
pcm device name. E.g., hw:0,0 or surround51 or /dev/dsp

SEE ALSO

uhd_fft(1) uhd_rx_cfile(1) uhd_siggen(1) uhd_siggen_gui(1)

2022-12-14 uhd_rx_nogui 3.10.5.0-rc1