GRDCUT(1gmt) | GMT | GRDCUT(1gmt) |

# NAME¶

grdcut - Extract subregion from a grid

# SYNOPSIS¶

**gmt grdcut** *ingrid* **-G***outgrid*

**-R***region* [ **-J***parameters* ] [
**-N**[*nodata*] ] [
**-S***lon/lat/radius*[*unit*][**+n**] ] [
**-V**[*level*] ] [ **-Z**[*min/max*][**+n**|**N**
|**r**] ] [ **-f**flags ] [ **--PAR**=*value* ]

**Note:** No space is allowed between the option flag and the
associated arguments.

# DESCRIPTION¶

**grdcut** will produce a new *outgrid* file which is a
subregion of *ingrid*. The subregion is specified with **-R** as in
other programs; the specified range must not exceed the range of
*ingrid* (but see **-N**). If in doubt, run grdinfo to check range.
Alternatively, define the subregion indirectly via a range check on the node
values or via distances from a given point. Finally, you can use **-J**
for oblique projections to determine the corresponding rectangular **-R**
setting that will give a grid that fully covers the oblique domain.
Complementary to **grdcut** there is grdpaste, which will join together
two grid files along a common edge.

# REQUIRED ARGUMENTS¶

*ingrid*- This is the input grid file.

**-G***outgrid*- This is the output grid file.

# OPTIONAL ARGUMENTS¶

**-J***parameters*(more ...)- Select map projection.

**-N**[*nodata*]- Allow grid to be extended if new
**-R**exceeds existing boundaries. Append*nodata*value to initialize nodes outside current region [Default is NaN].

**-R***xmin*/*xmax*/*ymin*/*ymax*[**+r**][**+u***unit*] (more ...)- Specify the region of interest. This defines the subregion to be cut out.

**-S***lon/lat/radius*[*unit*][**+n**]- Specify an origin and radius; append a distance unit (see Unit_attributes)
and we determine the corresponding rectangular region so that all grid
nodes on or inside the circle are contained in the subset. If
**+n**is appended we set all nodes outside the circle to NaN.

**-V**[*level*] (more ...)- Select verbosity level [c].

**-Z**[*min/max*][**+n**|**N**|**r**]- Determine a new rectangular region so that all nodes
*outside*this region are also outside the given*z*-range [-inf/+inf]. To indicate no limit on min or max only, specify a hyphen (-). Normally, any NaNs encountered are simply skipped and not considered in the range-decision. Append**+n**to consider a NaN to be outside the given*z*-range. This means the new subset will be NaN-free. Alternatively, append**+r**to consider NaNs to be within the data range. In this case we stop shrinking the boundaries once a NaN is found [Default simply skips NaNs when making the range decision]. Finally, if your core subset grid is surrounded by rows and/or columns that are all NaNs, append**+N**to strip off such columns before (optionally) considering the range of the core subset for further reduction of the area.

**-f**[**i**|**o**]*colinfo*(more ...)- Specify data types of input and/or output columns.

**-^**or just**-**- Print a short message about the syntax of the command, then exits (NOTE:
on Windows just use
**-**). **-+**or just**+**- Print an extensive usage (help) message, including the explanation of any module-specific option (but not the GMT common options), then exits.
**-?**or no arguments- Print a complete usage (help) message, including the explanation of all options, then exits.
**--PAR**=*value*- Temporarily override a GMT default setting; repeatable. See /gmt.conf for parameters.

# UNITS¶

For map distance unit, append *unit* **d** for arc degree,
**m** for arc minute, and **s** for arc second, or **e** for meter
[Default], **f** for foot, **k** for km, **M** for statute mile,
**n** for nautical mile, and **u** for US survey foot. By default we
compute such distances using a spherical approximation with great circles
(**-jg**). You can use **-jf** to perform "Flat Earth"
calculations (quicker but less accurate) or **-je** to perform exact
geodesic calculations (slower but more accurate; see PROJ_GEODESIC for
method used).

# GRID FILE FORMATS¶

By default GMT writes out grid as single precision floats in a COARDS-complaint netCDF file format. However, GMT is able to produce grid files in many other commonly used grid file formats and also facilitates so called "packing" of grids, writing out floating point data as 1- or 2-byte integers. (more ...)

# GEOGRAPHICAL AND TIME COORDINATES¶

When the output grid type is netCDF, the coordinates will be
labeled "longitude", "latitude", or "time"
based on the attributes of the input data or grid (if any) or on the
**-f** or **-R** options. For example, both **-f0x** **-f1t**
and **-R**90w/90e/0t/3t will result in a longitude/time grid. When the x,
y, or z coordinate is time, it will be stored in the grid as relative time
since epoch as specified by TIME_UNIT and TIME_EPOCH in the gmt.conf file or
on the command line. In addition, the **unit** attribute of the time
variable will indicate both this unit and epoch.

# EXAMPLES¶

Suppose you have used surface to grid ship gravity in the region between 148E - 162E and 8N - 32N, and you do not trust the gridding near the edges, so you want to keep only the area between 150E - 160E and 10N - 30N, then:

gmt grdcut grav_148_162_8_32.nc -Ggrav_150_160_10_30.nc -R150/160/10/30 -V

To return the subregion of a grid such that any boundary strips where all values are entirely above 0 are excluded, try

gmt grdcut bathy.nc -Gtrimmed_bathy.nc -Z-/0 -V

To return the subregion of a grid such that any boundary rows or columns that are all NaNs, try

gmt grdcut bathy.nc -Gtrimmed_bathy.nc -Z+N -V

To return the subregion of a grid that contains all nodes within a distance of 500 km from the point 45,30 try

gmt grdcut bathy.nc -Gsubset_bathy.nc -S45/30/500k -V

To obtain data for an oblique Mercator projection map we need to
extract more data that is actually used. This is necessary because the
output of **grdcut** has edges defined by parallels and meridians, while
the oblique map in general does not. Hence, to get all the data from the
ETOPO2 data needed to make a contour map for the region defined by its lower
left and upper right corners and the desired projection, use

gmt grdcut @earth_relief_02m -R160/20/220/30r -Joc190/25.5/292/69/1 -Gdata.nc

# SEE ALSO¶

gmt, grdclip, grdfill, grdinfo, grdpaste, surface

# COPYRIGHT¶

2019, The GMT Team

September 7, 2019 | 6.0.0rc4 |