.TH FREEIPMI_INTERPRET_SENSOR 5 "2021-12-10" "FreeIPMI 1.6.8" "Configuration"
.SH "NAME"
freeipmi_interpret_sensor.conf \- specify sensor interpretation rules
.SH "DESCRIPTION"
The
.B /etc/freeipmi//freeipmi_interpret_sensor.conf
defines how IPMI sensors should be
interpreted. IPMI based sensors specify a number of
states/thresholds when they are read. Based on those
states/thresholds, libraries and tools such as
.B libfreeipmi(3),
.B libipmimonitoring(3)
and
.B ipmi-sensors(8)
can report if a sensor reading is "good" or "bad" via a report of a
NOMINAL, WARNING, or CRITICAL state.
.LP
Each of the states listed below are (hopefully) descriptive enough
to describe the state conditions that may be set/unset for each
sensor type. For more detailed information on each of the
individual states listed below, please see the IPMI Specification
"Sensor and Event Code Tables".
.B Ipmi-sensors(8)
can be used to determine the sensor types and the states/thresholds
that exist on a system by outputting very verbose output and seeing
what types of Assertion or Deassertion events are possible.
.LP
The possible values for all states/thresholds below are:
.LP
Nominal - Signal Nominal reading if state/threshold tripped
.LP
Warning - Signal Warning reading if state/treshold tripped
.LP
Critical - Signal Critical reading if state/threshold tripped
.LP
Not all IPMI sensor types and event types are currently supported. If
you would like more to be supported, please e-mail the FreeIPMI
mailing list.
.LP
The default values selected for individual states/thresholds being
tripped are based on best guesses and motherboards being analyzed.
If you think they should be changed, please e-mail the FreeIPMI
mailing list to discuss what the defaults should be.
.LP
Most default interpretations can be determined quite easily and can
meet the needs of most users. For example, a reading of
"Performance_Met" is normally better than "Performance_Lags".
However, some sensors can be ambiguous and depend completely on the
manufacturer. For example, "State_Asserted" vs. "State_Deasserted"
are completely at the interpretation of the vendor. Users are advised
to adjust the interpretations below as needed for their machines.
.LP
Every group of state conditions below includes a configuration for
"No_Event". This is the condition under which no sensor states/events
have occurred or are triggered. Under most conditions, a mapping to
"Nominal" is preferred. However, under some circumstances, it may be
useful to report something else. For example, if a sensor on a
particular motherboard is required to report a state/event, a no
sensor state condition could indicate a broken a sensor. This is
highly dependent on the motherboard.
.LP
.SH "FORMAT"
The configuration options that can be specified in the configuration
file are listed below. Each configuration option must be listed on a
separate line. Arguments for an option are separated by any amount of
whitespace. Multiple arguments are also separated by whitespace.
Comments can be marked by using the pound sign ("#") character, and
lines can be continued on the next using backslash ("\\").
.SH "OPTIONS"
.TP
.B IPMI_Threshold_Sensor
The following states correspond to threshold sensors. This normally
applies to sensors that measure non-discrete values, such as
temperatures, voltages, RPM, etc.
.RS
.TP
\fBIPMI_Threshold_Sensor_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Critical_Threshold\fR
Defaults to Nominal.
.TP
\fBIPMI_Threshold_Sensor_At_Or_Below_Lower_Critical_Threshold\fR
Defaults to Critical.
.TP
\fBIPMI_Threshold_Sensor_At_Or_Below_Lower_Non_Recoverable_Threshold\fR
Defaults to Critical.
.TP
\fBIPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Critical_Threshold\fR
Defaults to Nominal.
.TP
\fBIPMI_Threshold_Sensor_At_Or_Above_Upper_Critical_Threshold\fR
Defaults to Critical.
.TP
\fBIPMI_Threshold_Sensor_At_Or_Above_Upper_Non_Recoverable_Threshold\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Temperature_State
The following states correspond to Temperature sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Temperature_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Temperature_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Temperature_State_Asserted\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Temperature_Limit
The following states correspond to Temperature sensors that report on
limits.
.RS
.TP
\fBIPMI_Temperature_Limit_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Temperature_Limit_Not_Exceeded\fR
Defaults to Nominal.
.TP
\fBIPMI_Temperature_Limit_Exceeded\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Temperature_Transition_Severity
The following states correspond to Temperature sensors that report on
device severity.
.RS
.TP
\fBIPMI_Temperature_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Temperature_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Temperature_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Temperature_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Voltage_State
The following states correspond to Voltage sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Voltage_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_State_Asserted\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Voltage_Limit
The following states correspond to Voltage sensors that report on
limits.
.RS
.TP
\fBIPMI_Voltage_Limit_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_Limit_Not_Exceeded\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_Limit_Exceeded\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Voltage_Performance
The following states correspond to Voltage sensors that report on
performance.
.RS
.TP
\fBIPMI_Voltage_Performance_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_Performance_Met\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_Performance_Lags\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Voltage_Transition_Severity
The following states correspond to Voltage sensors that report on
device severity.
.RS
.TP
\fBIPMI_Voltage_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Voltage_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Voltage_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Voltage_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Current_Transition_Severity
The following states correspond to Current sensors that report on
device severity.
.RS
.TP
\fBIPMI_Current_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Current_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Current_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Current_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Fan_State
The following states correspond to Fan sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Fan_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_State_Asserted\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Fan_Transition_Severity
The following states correspond to Fan sensors that report on
device severity.
.RS
.TP
\fBIPMI_Fan_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Fan_Device_Present
The following states correspond to Fan sensors that report on
device installation.
.RS
.TP
\fBIPMI_Fan_Device_Present_Device_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Device_Present_Device_Removed_Device_Absent\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Device_Present_Device_Inserted_Device_Present\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Power_Supply_Transition_Severity
The following states correspond to Power Supply sensors that report on
device severity.
.RS
.TP
\fBIPMI_Power_Supply_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Supply_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Fan_Transition_Availability
The following states correspond to Fan sensors that report on
device availability.
.RS
.TP
\fBIPMI_Fan_Transition_Availability_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Transition_Availability_To_Running\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Transition_Availability_To_In_Test\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Availability_To_Power_Off\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Availability_To_On_Line\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Availability_To_Off_Line\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Availability_To_Off_Duty\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Availability_To_Degraded\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Transition_Availability_To_Power_Save\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Transition_Availability_Install_Error\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Fan_Redundancy
The following states correspond to Fan sensors that report on
redundancy.
.RS
.TP
\fBIPMI_Fan_Redundancy_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Redundancy_Fully_Redundant\fR
Defaults to Nominal.
.TP
\fBIPMI_Fan_Redundancy_Redundancy_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Redundancy_Redundancy_Degraded\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Redundancy_Non_Redundant_Insufficient_Resources\fR
Defaults to Critical.
.TP
\fBIPMI_Fan_Redundancy_Redundancy_Degraded_From_Fully_Redundant\fR
Defaults to Warning.
.TP
\fBIPMI_Fan_Redundancy_Redundancy_Degraded_From_Non_Redundant\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Physical_Security
The following states correspond to Physical Security sensors w/
Physical Security specific output states.
.RS
.TP
\fBIPMI_Physical_Security_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Physical_Security_General_Chassis_Intrusion\fR
Defaults to Critical.
.TP
\fBIPMI_Physical_Security_Drive_Bay_Intrusion\fR
Defaults to Critical.
.TP
\fBIPMI_Physical_Security_IO_Card_Intrusion\fR
Defaults to Critical.
.TP
\fBIPMI_Physical_Security_Processor_Area_Intrusion\fR
Defaults to Critical.
.TP
\fBIPMI_Physical_Security_LAN_Leash_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Physical_Security_Unauthorized_Dock_Undock\fR
Defaults to Critical.
.TP
\fBIPMI_Physical_Security_FAN_Area_Intrusion\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Platform_Security_Violation_Attempt
The following states correspond to Platform Violation Attempt sensors w/
Platform Security Violation Attempt specific output states.
.RS
.TP
\fBIPMI_Platform_Security_Violation_Attempt_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Platform_Security_Violation_Attempt_Secure_Mode_Violation_Attempt\fR
Defaults to Critical.
.TP
\fBIPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_User_Password\fR
Defaults to Critical.
.TP
\fBIPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Attempt_Setup_Password\fR
Defaults to Critical.
.TP
\fBIPMI_Platform_Security_Violation_Attempt_Pre_Boot_Password_Violation_Network_Boot_Password\fR
Defaults to Critical.
.TP
\fBIPMI_Platform_Security_Violation_Attempt_Other_Pre_Boot_Password_Violation\fR
Defaults to Critical.
.TP
\fBIPMI_Platform_Security_Violation_Attempt_Out_Of_Band_Access_Password_Violation\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Processor
The following states correspond to Processor sensors w/
Processor specific output states.
.RS
.TP
\fBIPMI_Processor_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Processor_IERR\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_Thermal_Trip\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_FRB1_BIST_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_FRB2_Hang_In_POST_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_FRB3_Processor_Startup_Initialization_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_Configuration_Error\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_SMBIOS_Uncorrectable_CPU_Complex_Error\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_Processor_Presence_Detected\fR
Defaults to Nominal.
.TP
\fBIPMI_Processor_Processor_Disabled\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_Terminator_Presence_Detected\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_Processor_Automatically_Throttled\fR
Defaults to Warning.
.TP
\fBIPMI_Processor_Machine_Check_Exception\fR
Defaults to Critical.
.TP
\fBIPMI_Processor_Correctable_Machine_Check_Error\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Processor_State
The following states correspond to Processor sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Processor_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Processor_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Processor_State_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Power_Supply
The following states correspond to Power Supply sensors w/
Power Supply specific output states.
.RS
.TP
\fBIPMI_Power_Supply_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_Presence_Detected\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_Power_Supply_Failure_Detected\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Predictive_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Power_Supply_Input_Lost_AC_DC\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Power_Supply_Input_Lost_Or_Out_Of_Range\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Power_Supply_Input_Out_Of_Range_But_Present\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Configuration_Error\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Power_Supply_Inactive\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Power_Supply_State
The following states correspond to Power_Supply sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Power_Supply_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_State_Deasserted\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_State_Asserted\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Power_Supply_Redundancy
The following states correspond to Power Supply sensors that report on
redundancy.
.RS
.TP
\fBIPMI_Power_Supply_Redundancy_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_Redundancy_Fully_Redundant\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Supply_Redundancy_Redundancy_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Redundancy_Redundancy_Degraded\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Redundancy_Non_Redundant_Insufficient_Resources\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Fully_Redundant\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Supply_Redundancy_Redundancy_Degraded_From_Non_Redundant\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Power_Unit
The following states correspond to Power Unit sensors w/
Power Unit specific output states.
.RS
.TP
\fBIPMI_Power_Unit_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Unit_Power_Off_Power_Down\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Unit_Power_Cycle\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Unit_240VA_Power_Down\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Unit_Interlock_Power_Down\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Unit_AC_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Soft_Power_Control_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Power_Unit_Failure_Detected\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Predictive_Failure\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Power_Unit_Device_Present
The following states correspond to Power Unit sensors that report on
device installation.
.RS
.TP
\fBIPMI_Power_Unit_Device_Present_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Unit_Device_Present_Device_Removed_Device_Absent\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Device_Present_Device_Inserted_Device_Present\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Power_Unit_Redundancy
The following states correspond to Power Unit sensors that report on
redundancy.
.RS
.TP
\fBIPMI_Power_Unit_Redundancy_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Unit_Redundancy_Fully_Redundant\fR
Defaults to Nominal.
.TP
\fBIPMI_Power_Unit_Redundancy_Redundancy_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Redundancy_Redundancy_Degraded\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Redundancy_Non_Redundant_Insufficient_Resources\fR
Defaults to Critical.
.TP
\fBIPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Fully_Redundant\fR
Defaults to Warning.
.TP
\fBIPMI_Power_Unit_Redundancy_Redundancy_Degraded_From_Non_Redundant\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Cooling_Device_Redundancy
The following states correspond to Cooling Device sensors that report on
redundancy.
.RS
.TP
\fBIPMI_Cooling_Device_Redundancy_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Cooling_Device_Redundancy_Fully_Redundant\fR
Defaults to Nominal.
.TP
\fBIPMI_Cooling_Device_Redundancy_Redundancy_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Cooling_Device_Redundancy_Redundancy_Degraded\fR
Defaults to Warning.
.TP
\fBIPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant\fR
Defaults to Critical.
.TP
\fBIPMI_Cooling_Device_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy\fR
Defaults to Critical.
.TP
\fBIPMI_Cooling_Device_Redundancy_Non_Redundant_Insufficient_Resources\fR
Defaults to Critical.
.TP
\fBIPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Fully_Redundant\fR
Defaults to Warning.
.TP
\fBIPMI_Cooling_Device_Redundancy_Redundancy_Degraded_From_Non_Redundant\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Memory
The following states correspond to Memory sensors w/
Memory specific output states.
.RS
.TP
\fBIPMI_Memory_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Correctable_Memory_Error\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Uncorrectable_Memory_Error\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Parity\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Memory_Scrub_Failed\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Memory_Device_Disabled\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Correctable_Memory_Error_Logging_Limit_Reached\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Presence_Detected\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Configuration_Error\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Spare\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Memory_Automatically_Throttled\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Critical_Overtemperature\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Memory_State
The following states correspond to Memory sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Memory_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_State_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Memory_Transition_Severity
The following states correspond to Memory sensors that report on
device severity.
.RS
.TP
\fBIPMI_Memory_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Memory_Redundancy
The following states correspond to Cooling Device sensors that report on
redundancy.
.RS
.TP
\fBIPMI_Memory_Redundancy_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Redundancy_Fully_Redundant\fR
Defaults to Nominal.
.TP
\fBIPMI_Memory_Redundancy_Redundancy_Lost\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Redundancy_Redundancy_Degraded\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Redundant\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Redundancy_Non_Redundant_Sufficient_Resources_From_Insufficient_Redundancy\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Redundancy_Non_Redundant_Insufficient_Resources\fR
Defaults to Critical.
.TP
\fBIPMI_Memory_Redundancy_Redundancy_Degraded_From_Fully_Redundant\fR
Defaults to Warning.
.TP
\fBIPMI_Memory_Redundancy_Redundancy_Degraded_From_Non_Redundant\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Drive_Slot
The following states correspond to Drive Slot sensors w/
Drive Slot specific output states.
.RS
.TP
\fBIPMI_Drive_Slot_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Drive_Presence\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Drive_Fault\fR
Defaults to Critical.
.TP
\fBIPMI_Drive_Slot_Predictive_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Drive_Slot_Hot_Spare\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Consistency_Check_Parity_Check_In_Progress\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_In_Critical_Array\fR
Defaults to Critical.
.TP
\fBIPMI_Drive_Slot_In_Failed_Array\fR
Defaults to Critical.
.TP
\fBIPMI_Drive_Slot_Rebuild_Remap_In_Progress\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Rebuild_Remap_Aborted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Drive_Slot_State
The following states correspond to Drive Slot sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Drive_Slot_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_State_Deasserted\fR
Defaults to Warning.
.TP
\fBIPMI_Drive_Slot_State_Asserted\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Drive_Slot_Predictive_Failure
The following states correspond to Drive_Slot sensors that report a
predictive failure assertion or deassertion.
.RS
.TP
\fBIPMI_Drive_Slot_Predictive_Failure_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Predictive_Failure_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Predictive_Failure_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Drive_Slot_Device_Present
The following states correspond to Drive Slot sensors that report on
device installation.
.RS
.TP
\fBIPMI_Drive_Slot_Device_Present_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Drive_Slot_Device_Present_Device_Removed_Device_Absent\fR
Defaults to Critical.
.TP
\fBIPMI_Drive_Slot_Device_Present_Device_Inserted_Device_Present\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_POST_Memory_Resize_State
The following states correspond to POST Memory Resize sensors that
report an assertion or deassertion.
.RS
.TP
\fBIPMI_POST_Memory_Resize_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_POST_Memory_Resize_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_POST_Memory_Resize_State_Asserted\fR
Defaults to Warning.
.RE
.TP
.B IPMI_System_Firmware_Progress
The following states correspond to System Firmware Progress sensors w/
System Firmware Progress specific output states.
.RS
.TP
\fBIPMI_System_Firmware_Progress_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Firmware_Progress_System_Firmware_Error\fR
Defaults to Critical.
.TP
\fBIPMI_System_Firmware_Progress_System_Firmware_Hang\fR
Defaults to Critical.
.TP
\fBIPMI_System_Firmware_Progress_System_Firmware_Progress\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_System_Firmware_Progress_Transition_Severity
The following states correspond to System Firmware Progress sensors
that report on device severity.
.RS
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_System_Firmware_Progress_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Event_Logging_Disabled
The following states correspond to Event Logging Disabled sensors w/
.RS
.TP
\fBIPMI_Event_Logging_Disabled_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Event_Logging_Disabled_Correctable_Memory_Error_Logging_Disabled\fR
Defaults to Critical.
.TP
\fBIPMI_Event_Logging_Disabled_Event_Type_Logging_Disabled\fR
Defaults to Critical.
.TP
\fBIPMI_Event_Logging_Disabled_Log_Area_Reset_Cleared\fR
Defaults to Nominal.
.TP
\fBIPMI_Event_Logging_Disabled_All_Event_Logging_Disabled\fR
Defaults to Critical.
.TP
\fBIPMI_Event_Logging_Disabled_SEL_Full\fR
Defaults to Critical.
.TP
\fBIPMI_Event_Logging_Disabled_SEL_Almost_Full\fR
Defaults to Warning.
.TP
\fBIPMI_Event_Logging_Disabled_Correctable_Machine_Check_Error_Logging_Disabled\fR
Defaults to Critical.
.RE
.TP
.B IPMI_System_Event
The following states correspond to System Event sensors w/
System Event specific output states.
.RS
.TP
\fBIPMI_System_Event_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_System_Reconfigured\fR
Defaults to Warning.
.TP
\fBIPMI_System_Event_OEM_System_Boot_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_Undetermined_System_Hardware_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_System_Event_Entry_Added_To_Auxiliary_Log\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_PEF_Action\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_Timestamp_Clock_Sync\fR
Defaults to Warning.
.RE
.TP
.B IPMI_System_Event_Transition_State
The following states correspond to System Event sensors that report a
transition state.
.RS
.TP
\fBIPMI_System_Event_Transition_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_Transition_State_Active\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_Transition_State_Idle\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_Transition_State_Busy\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_System_Event_State
The following states correspond to System Event sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_System_Event_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_System_Event_State_Asserted\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Critical_Interrupt
The following states correspond to Critical Interrupt sensors w/
Critical Interrupt specific output states.
.RS
.TP
\fBIPMI_Critical_Interrupt_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Critical_Interrupt_Front_Panel_NMI_Diagnostic_Interrupt\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_Bus_Timeout\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_IO_Channel_Check_NMI\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_Software_NMI\fR
Defaults to Warning.
.TP
\fBIPMI_Critical_Interrupt_PCI_PERR\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_PCI_SERR\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_EISA_Fail_Safe_Timeout\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_Bus_Correctable_Error\fR
Defaults to Warning.
.TP
\fBIPMI_Critical_Interrupt_Bus_Uncorrectable_Error\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_Fatal_NMI\fR
Defaults to Critical.
.TP
\fBIPMI_Critical_Interrupt_Bus_Fatal_Error\fR
Defaults to Critical.
\fBIPMI_Critical_Interrupt_Bus_Degraded\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Button_Switch
The following states correspond to Button/Switch sensors w/
Button/Switch specific output states.
.RS
.TP
\fBIPMI_Button_Switch_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_Power_Button_Pressed\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_Sleep_Button_Pressed\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_Reset_Button_Pressed\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_FRU_Latch_Open\fR
Defaults to Warning.
.TP
\fBIPMI_Button_Switch_FRU_Service_Request_Button\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Button_Switch_State
The following states correspond to Button/Switch sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Button_Switch_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_State_Asserted\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Button_Switch_Transition_Severity
The following states correspond to Button/Switch sensors that report on
device severity.
.RS
.TP
\fBIPMI_Button_Switch_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Button_Switch_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Module_Board_State
The following states correspond to Module/Board sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Module_Board_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Module_Board_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Module_Board_State_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Module_Board_Device_Present
The following states correspond to Module/Board sensors that report on
device installation.
.RS
.TP
\fBIPMI_Module_Board_Device_Present_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Module_Board_Device_Present_Device_Removed_Device_Absent\fR
Defaults to Critical.
.TP
\fBIPMI_Module_Board_Device_Present_Device_Inserted_Device_Present\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Chassis_Transition_Severity
The following states correspond to Chassis sensors that report on
device severity.
.RS
.TP
\fBIPMI_Chassis_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Chassis_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Chassis_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Chassis_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Chip_Set_Transition_Severity
The following states correspond to Chip Set sensors that report on
device severity.
.RS
.TP
\fBIPMI_Chip_Set_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Chip_Set_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Cable_Interconnect
The following states correspond to Cable/Interconnect sensors w/
Cable/Interconnect specific output states.
.RS
.TP
\fBIPMI_Cable_Interconnect_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Cable_Interconnect_Is_Connected\fR
Defaults to Nominal.
.TP
\fBIPMI_Cable_Interconnect_Configuration_Error\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Cable_Interconnect_Transition_Severity
The following states correspond to Cable/Interconnect sensors that report on
device severity.
.RS
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Cable_Interconnect_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Boot_Error
The following states correspond to Boot Error sensors w/
Boot Error specific output states.
.RS
.TP
\fBIPMI_Boot_Error_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Boot_Error_No_Bootable_Media\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Non_Bootable_Diskette_Left_In_Drive\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_PXE_Server_Not_Found\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Invalid_Boot_Sector\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Timeout_Waiting_For_User_Selection_Of_Boot_Source\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Boot_Error_State
The following states correspond to Boot Error sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Boot_Error_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Boot_Error_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Boot_Error_State_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Boot_Error_Transition_Severity
The following states correspond to Boot Error sensors that report on
device severity.
.RS
.TP
\fBIPMI_Boot_Error_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Boot_Error_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_OS_Boot
The following states correspond to OS Boot sensors w/ OS Boot specific
output events.
.RS
\fBIPMI_OS_Boot_No_Event\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_A_Boot_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_C_Boot_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_PXE_Boot_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_Diagnostic_Boot_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_CD_ROM_Boot_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_ROM_Boot_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_Boot_Completed_Boot_Device_Not_Specified\fR
Defaults to Warning.
\fBIPMI_OS_Boot_Base_OS_Hypervisor_Installation_Started\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_Base_OS_Hypervisor_Installation_Completed\fR
Defaults to Nominal.
\fBIPMI_OS_Boot_Base_OS_Hypervisor_Installation_Aborted\fR
Defaults to Warning.
\fBIPMI_OS_Boot_Base_OS_Hypervisor_Installation_Failed\fR
Defaults to Critical.
.RE
.TP
.B IPMI_OS_Critical_Stop_State
The following states correspond to OS Critical Stop sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_OS_Critical_Stop_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_OS_Critical_Stop_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_OS_Critical_Stop_State_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Slot_Connector
The following states correspond to Slot Connector sensors w/
Slot Connector specific output states.
.RS
.TP
\fBIPMI_Slot_Connector_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Fault_Status_Asserted\fR
Defaults to Critical.
.TP
\fBIPMI_Slot_Connector_Identify_Status_Asserted\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Slot_Connector_Device_Installed_Attached\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Installation\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Slot_Connector_Ready_For_Device_Removal\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Slot_Power_Is_Off\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Slot_Connector_Device_Removal_Request\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Interlock_Asserted\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Slot_Is_Disabled\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Slot_Holds_Spare_Device\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Slot_Connector_Transition_Severity
The following states correspond to Slot Connector sensors that report on
device severity.
.RS
.TP
\fBIPMI_Slot_Connector_Transition_Severity_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_OK\fR
Defaults to Nominal.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_OK\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable_From_Less_Severe\fR
Defaults to Critical.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Critical_From_More_Severe\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_Critical_From_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Transition_To_Non_Recoverable\fR
Defaults to Critical.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Monitor\fR
Defaults to Warning.
.TP
\fBIPMI_Slot_Connector_Transition_Severity_Informational\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_System_ACPI_Power_State
.RS
.TP
\fBIPMI_System_ACPI_Power_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S0_G0\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S1\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S2\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S3\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S4\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S5_G2\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S4_S5_Soft_Off\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_G3_Mechanical_Off\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_Sleeping_in_an_S1_S2_or_S3_States\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_G1_Sleeping\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_S5_Entered_By_Override\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_Legacy_ON_State\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_Legacy_OFF_State\fR
Defaults to Nominal.
.TP
\fBIPMI_System_ACPI_Power_State_Unspecified\fR
Defaults to Critical.
.TP
\fBIPMI_System_ACPI_Power_State_Unknown\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Watchdog2
The following states correspond to Watchdog 2 sensors w/
Watchdog 2 specific output states.
.RS
.TP
\fBIPMI_Watchdog2_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Watchdog2_Timer_Expired\fR
Defaults to Warning.
.TP
\fBIPMI_Watchdog2_Hard_Reset\fR
Defaults to Critical.
.TP
\fBIPMI_Watchdog2_Power_Down\fR
Defaults to Critical.
.TP
\fBIPMI_Watchdog2_Power_Cycle\fR
Defaults to Critical.
.TP
\fBIPMI_Watchdog2_Reserved1\fR
Defaults to Nominal.
.TP
\fBIPMI_Watchdog2_Reserved2\fR
Defaults to Nominal.
.TP
\fBIPMI_Watchdog2_Reserved3\fR
Defaults to Nominal.
.TP
\fBIPMI_Watchdog2_Reserved4\fR
Defaults to Nominal.
.TP
\fBIPMI_Watchdog2_Timer_Interrupt\fR
Defaults to Warning.
.RE
.TP
.B IPMI_Platform_Alert_State
The following states correspond to Platform Alert sensors that report an
assertion or deassertion.
.RS
.TP
\fBIPMI_Platform_Alert_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Platform_Alert_State_Deasserted\fR
Defaults to Nominal.
.TP
\fBIPMI_Platform_Alert_State_Asserted\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Entity_Presence
The following states correspond to Entity Presence sensors w/
Entity Presence specific output states.
.RS
.TP
\fBIPMI_Entity_Presence_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Entity_Presence_Entity_Present\fR
Defaults to Nominal.
.TP
\fBIPMI_Entity_Presence_Entity_Absent\fR
Defaults to Critical.
.TP
\fBIPMI_Entity_Presence_Entity_Disabled\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Entity_Presence_Device_Present
The following states correspond to Entity Presence sensors that report on
device installation.
.RS
.TP
\fBIPMI_Entity_Presence_Device_Present_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Entity_Presence_Device_Present_Device_Removed_Device_Absent\fR
Defaults to Nominal.
.TP
\fBIPMI_Entity_Presence_Device_Present_Device_Inserted_Device_Present\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Management_Subsystem_Health
The following states correspond to Management Subsystem Health sensors w/
Management Subsystem Health specific output states.
.RS
.TP
\fBIPMI_Management_Subsystem_Health_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Management_Subsystem_Health_Sensor_Access_Degraded_Or_Unavailable\fR
Defaults to Critical.
.TP
\fBIPMI_Management_Subsystem_Health_Controller_Access_Degraded_Or_Unavailable\fR
Defaults to Critical.
.TP
\fBIPMI_Management_Subsystem_Health_Management_Controller_Off_Line\fR
Defaults to Critical.
.TP
\fBIPMI_Management_Subsystem_Health_Management_Controller_Unavailable\fR
Defaults to Critical.
.TP
\fBIPMI_Management_Subsystem_Health_Sensor_Failure\fR
Defaults to Critical.
.TP
\fBIPMI_Management_Subsystem_Health_FRU_Failure\fR
Defaults to Critical.
.RE
.TP
.B IPMI_Battery
The following states correspond to Battery sensors w/
Battery specific output states.
.RS
.TP
\fBIPMI_Battery_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Battery_Battery_Low\fR
Defaults to Warning.
.TP
\fBIPMI_Battery_Battery_Failed\fR
Defaults to Critical.
.TP
\fBIPMI_Battery_Battery_Presence_Detected\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_Session_Audit
The following states correspond to Session Audit sensors w/
Session_Audit specific output states.
.RS
.TP
\fBIPMI_Version_Change_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity\fR
Defaults to Warning.
.TP
\fBIPMI_Version_Change_Firmware_Or_Software_Change_Detected_With_Associated_Entity\fR
Defaults to Warning.
.TP
\fBIPMI_Version_Change_Hardware_Incompatability_Detected_With_Associated_Entity\fR
Defaults to Critical.
.TP
\fBIPMI_Version_Change_Firmware_Or_Software_Incompatability_Detected_With_Associated_Entity\fR
Defaults to Critical.
.TP
\fBIPMI_Version_Change_Entity_Is_Of_An_Invalid_Or_Unsupported_Hardware_Version\fR
Defaults to Critical.
.TP
\fBIPMI_Version_Change_Entity_Contains_An_Invalid_Or_Unsupported_Firmware_Or_Software_Version\fR
Defaults to Critical.
.TP
\fBIPMI_Version_Change_Hardware_Change_Detected_With_Associated_Entity_Was_Successful\fR
Defaults to Nominal.
.TP
\fBIPMI_Version_Change_Software_Or_FW_Change_Detected_With_Associated_Entity_Was_Successful\fR
Defaults to Nominal.
.RE
.TP
.B IPMI_FRU_State
The following states correspond to FRU State sensors w/
FRU State specific output states.
.RS
.TP
\fBIPMI_FRU_State_No_Event\fR
Defaults to Nominal.
.TP
\fBIPMI_FRU_State_FRU_Not_Installed\fR
Defaults to Critical.
.TP
\fBIPMI_FRU_State_FRU_Inactive\fR
Defaults to Critical.
.TP
\fBIPMI_FRU_State_FRU_Activation_Requested\fR
Defaults to Warning.
.TP
\fBIPMI_FRU_State_FRU_Activation_In_Progress\fR
Defaults to Warning.
.TP
\fBIPMI_FRU_State_FRU_Active\fR
Defaults to Nominal.
.TP
\fBIPMI_FRU_State_FRU_Deactivation_Requested\fR
Defaults to Warning.
.TP
\fBIPMI_FRU_State_FRU_Deactivation_In_Progress\fR
Defaults to Warning.
.TP
\fBIPMI_FRU_State_FRU_Communication_Lost\fR
Defaults to Critical.
.RE
.TP
.B IPMI_OEM
The following configuration options can be used to configure OEM
specific interpretations. Users should be aware that both
\fBIPMI_OEM_Bitmask\fR and \fBIPMI_OEM_Value\fR can be configured for
an identical \fIManufacturer\-ID\fR, \fIProduct\-ID\fR,
\fIEvent\-Reading\-Type\-Code\fR, and \fISensor\-Type\fR combination. All
interpretations rules for a specific combination are iterated through
and the worst resulting sensor state is returned (i.e. Warning <
Nominal, Critical < Warning). If no match is found, no sensor state
is returned for the OEM sensor reading.
For each of the configuration options below, \fI<Manufacturer\-ID>\fR
is the numeric IANA manufacturer ID for the manufacturer in question.
The \fI<Product\-ID>\fR is one or more numeric IDs representing the
manufacturer's product.  The \fI<Product\-ID>\fR can be listed as a
single numeric number (e.g. 1234), a range of IDs separated by a dash
(e.g. 12-20), or a list of specific product IDs separated by a plus
(e.g. 12+19+22). Both the \fIManufacturer\-ID\fR and
\fIProduct\-ID\fR can be found using
.B bmc-info(8).
Multiple \fI<Manufacturer\-ID>\fR and \fI<Product\-ID>\fR pairs can be
input separated by commas.
The \fIEvent\-Reading\-Type\-Code\fR and \fISensor\-Type\fR need not
be OEM types. They may be non-OEM types and used to provide
interpretation rules for sensors that may be behaving outside the
standard of the IPMI specification.
.RS
.TP
\fBIPMI_OEM_Bitmask\fR \fI<Manufacturer\-ID>\fR:\fI<Product\-ID>\fR,... \fIEvent\-Reading\-Type\-Code\fR \fISensor\-Type\fR \fISensor\-Event\-Bitmask\fR \fIState\fR
\fBIPMI_OEM_Bitmask\fR can be used to configure a state interpretation
for a specific \fIManufacturer\-ID\fR, \fIProduct\-ID\fR,
\fIEvent\-Reading\-Type\-Code\fR, and \fISensor\-Type\fR combination and a
specific bitmask of the \fISensor-Event\fR. The state will be
accepted as the sensor interpretation if the inputted bitmask ANDed
with the actual sensor event bitmask reading is true. As a special
case, the state will be accepted if the inputted bitmask and the
actual sensor event bitmask are both 0. In other words, if no events
happened, an OEM interpretation can be configured for this case by
inputing a bitmask of 0x0000.
.TP
\fBIPMI_OEM_Value\fR \fI<Manufacturer\-ID>\fR:\fI<Product\-ID>\fR,... \fIEvent\-Reading\-Type\-Code\fR \fISensor\-Type\fR \fISensor\-Event\-Bitmask-Value\fR \fIState\fR
\fBIPMI_OEM_Value\fR can be used to configure a state interpretation
for a specific \fIManufacturer\-ID\fR, \fIProduct\-ID\fR,
\fIEvent\-Reading\-Type\-Code\fR, and \fISensor\-Type\fR combination and a
specific value for the \fISensor\-Event\-Bitmask\fR. The state will be
accepted as the sensor interpretation if the inputted bitmask value is
equal to the actual sensor event bitmask reading.
.RE
.SH "FILES"
/etc/freeipmi//freeipmi_interpret_sensor.conf
.SH "REPORTING BUGS"
Report bugs to <freeipmi\-users@gnu.org> or <freeipmi\-devel@gnu.org>.
.SH "COPYRIGHT"
Copyright (C) 2007-2015 Lawrence Livermore National Security, LLC.
.PP
This library is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 3 of the License, or (at
your option) any later version.
.SH "SEE ALSO"
libfreeipmi(3), libipmimonitoring(3), ipmi-sensors(8)
.PP
http://www.gnu.org/software/freeipmi/