table of contents
L2TEST(1) | General Commands Manual | L2TEST(1) |
NAME¶
l2test - L2CAP testing tool
DESCRIPTION¶
l2test - L2CAP testing tool Usage:
- l2test <mode> [options] [bdaddr]
Modes:¶
-r listen and receive
-w listen and send
-d listen and dump incoming data
-x listen, then send, then dump incoming data
-t listen, then send and receive at the same time
-q connect, then send and receive at the same time
-s connect and send
-u connect and receive
-n connect and be silent
-y connect, then send, then dump incoming data
-c connect, disconnect, connect, ...
-m multiple connects
-p trigger dedicated bonding
-z information request
OPTIONS¶
- [-b bytes] [-i device] [-P psm] [-J cid] [-I imtu] [-O omtu] [-L seconds] enable SO_LINGER [-W seconds] enable deferred setup [-B filename] use data packets from file [-N num] send num frames (default = infinite) [-C num] send num frames before delay (default = 1) [-D milliseconds] delay after sending num frames (default = 0) [-K milliseconds] delay before receiving (default = 0) [-g milliseconds] delay before disconnecting (default = 0) [-X mode] l2cap mode (help for list, default = basic) [-a policy] chan policy (help for list, default = bredr) [-F fcs] use CRC16 check (default = 1) [-Q num] Max Transmit value (default = 3) [-Z size] Transmission Window size (default = 63) [-Y priority] socket priority [-H size] Maximum receive buffer size [-R] reliable mode [-G] use connectionless channel (datagram) [-U] use sock stream [-A] request authentication [-E] request encryption [-S] secure connection [-M] become master [-T] enable timestamps [-V type] address type (help for list, default = bredr) [-e seq] initial sequence value (default = 0)
Usage:¶
- l2test <mode> [options] [bdaddr]
Modes:¶
-r listen and receive
-w listen and send
-d listen and dump incoming data
-x listen, then send, then dump incoming data
-t listen, then send and receive at the same time
-q connect, then send and receive at the same time
-s connect and send
-u connect and receive
-n connect and be silent
-y connect, then send, then dump incoming data
-c connect, disconnect, connect, ...
-m multiple connects
-p trigger dedicated bonding
-z information request
- [-b bytes] [-i device] [-P psm] [-J cid] [-I imtu] [-O omtu] [-L seconds] enable SO_LINGER [-W seconds] enable deferred setup [-B filename] use data packets from file [-N num] send num frames (default = infinite) [-C num] send num frames before delay (default = 1) [-D milliseconds] delay after sending num frames (default = 0) [-K milliseconds] delay before receiving (default = 0) [-g milliseconds] delay before disconnecting (default = 0) [-X mode] l2cap mode (help for list, default = basic) [-a policy] chan policy (help for list, default = bredr) [-F fcs] use CRC16 check (default = 1) [-Q num] Max Transmit value (default = 3) [-Z size] Transmission Window size (default = 63) [-Y priority] socket priority [-H size] Maximum receive buffer size [-R] reliable mode [-G] use connectionless channel (datagram) [-U] use sock stream [-A] request authentication [-E] request encryption [-S] secure connection [-M] become master [-T] enable timestamps [-V type] address type (help for list, default = bredr) [-e seq] initial sequence value (default = 0)
April 2018 |