'\" '\" Generated from file 'nns_client\&.man' by tcllib/doctools with format 'nroff' '\" Copyright (c) 2007-2008 Andreas Kupries '\" .TH "nameserv" 3tcl 0\&.4\&.2 tcllib "Name service facility" .\" The -*- nroff -*- definitions below are for supplemental macros used .\" in Tcl/Tk manual entries. .\" .\" .AP type name in/out ?indent? .\" Start paragraph describing an argument to a library procedure. .\" type is type of argument (int, etc.), in/out is either "in", "out", .\" or "in/out" to describe whether procedure reads or modifies arg, .\" and indent is equivalent to second arg of .IP (shouldn't ever be .\" needed; use .AS below instead) .\" .\" .AS ?type? ?name? .\" Give maximum sizes of arguments for setting tab stops. Type and .\" name are examples of largest possible arguments that will be passed .\" to .AP later. If args are omitted, default tab stops are used. .\" .\" .BS .\" Start box enclosure. From here until next .BE, everything will be .\" enclosed in one large box. .\" .\" .BE .\" End of box enclosure. .\" .\" .CS .\" Begin code excerpt. .\" .\" .CE .\" End code excerpt. .\" .\" .VS ?version? ?br? .\" Begin vertical sidebar, for use in marking newly-changed parts .\" of man pages. The first argument is ignored and used for recording .\" the version when the .VS was added, so that the sidebars can be .\" found and removed when they reach a certain age. If another argument .\" is present, then a line break is forced before starting the sidebar. .\" .\" .VE .\" End of vertical sidebar. .\" .\" .DS .\" Begin an indented unfilled display. .\" .\" .DE .\" End of indented unfilled display. .\" .\" .SO ?manpage? .\" Start of list of standard options for a Tk widget. The manpage .\" argument defines where to look up the standard options; if .\" omitted, defaults to "options". The options follow on successive .\" lines, in three columns separated by tabs. .\" .\" .SE .\" End of list of standard options for a Tk widget. .\" .\" .OP cmdName dbName dbClass .\" Start of description of a specific option. cmdName gives the .\" option's name as specified in the class command, dbName gives .\" the option's name in the option database, and dbClass gives .\" the option's class in the option database. .\" .\" .UL arg1 arg2 .\" Print arg1 underlined, then print arg2 normally. .\" .\" .QW arg1 ?arg2? .\" Print arg1 in quotes, then arg2 normally (for trailing punctuation). .\" .\" .PQ arg1 ?arg2? .\" Print an open parenthesis, arg1 in quotes, then arg2 normally .\" (for trailing punctuation) and then a closing parenthesis. .\" .\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. .if t .wh -1.3i ^B .nr ^l \n(.l .ad b .\" # Start an argument description .de AP .ie !"\\$4"" .TP \\$4 .el \{\ . ie !"\\$2"" .TP \\n()Cu . el .TP 15 .\} .ta \\n()Au \\n()Bu .ie !"\\$3"" \{\ \&\\$1 \\fI\\$2\\fP (\\$3) .\".b .\} .el \{\ .br .ie !"\\$2"" \{\ \&\\$1 \\fI\\$2\\fP .\} .el \{\ \&\\fI\\$1\\fP .\} .\} .. .\" # define tabbing values for .AP .de AS .nr )A 10n .if !"\\$1"" .nr )A \\w'\\$1'u+3n .nr )B \\n()Au+15n .\" .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n .nr )C \\n()Bu+\\w'(in/out)'u+2n .. .AS Tcl_Interp Tcl_CreateInterp in/out .\" # BS - start boxed text .\" # ^y = starting y location .\" # ^b = 1 .de BS .br .mk ^y .nr ^b 1u .if n .nf .if n .ti 0 .if n \l'\\n(.lu\(ul' .if n .fi .. .\" # BE - end boxed text (draw box now) .de BE .nf .ti 0 .mk ^t .ie n \l'\\n(^lu\(ul' .el \{\ .\" Draw four-sided box normally, but don't draw top of .\" box if the box started on an earlier page. .ie !\\n(^b-1 \{\ \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .el \}\ \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .\} .fi .br .nr ^b 0 .. .\" # VS - start vertical sidebar .\" # ^Y = starting y location .\" # ^v = 1 (for troff; for nroff this doesn't matter) .de VS .if !"\\$2"" .br .mk ^Y .ie n 'mc \s12\(br\s0 .el .nr ^v 1u .. .\" # VE - end of vertical sidebar .de VE .ie n 'mc .el \{\ .ev 2 .nf .ti 0 .mk ^t \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' .sp -1 .fi .ev .\} .nr ^v 0 .. .\" # Special macro to handle page bottom: finish off current .\" # box/sidebar if in box/sidebar mode, then invoked standard .\" # page bottom macro. .de ^B .ev 2 'ti 0 'nf .mk ^t .if \\n(^b \{\ .\" Draw three-sided box if this is the box's first page, .\" draw two sides but no top otherwise. .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .\} .if \\n(^v \{\ .nr ^x \\n(^tu+1v-\\n(^Yu \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c .\} .bp 'fi .ev .if \\n(^b \{\ .mk ^y .nr ^b 2 .\} .if \\n(^v \{\ .mk ^Y .\} .. .\" # DS - begin display .de DS .RS .nf .sp .. .\" # DE - end display .de DE .fi .RE .sp .. .\" # SO - start of list of standard options .de SO 'ie '\\$1'' .ds So \\fBoptions\\fR 'el .ds So \\fB\\$1\\fR .SH "STANDARD OPTIONS" .LP .nf .ta 5.5c 11c .ft B .. .\" # SE - end of list of standard options .de SE .fi .ft R .LP See the \\*(So manual entry for details on the standard options. .. .\" # OP - start of full description for a single option .de OP .LP .nf .ta 4c Command-Line Name: \\fB\\$1\\fR Database Name: \\fB\\$2\\fR Database Class: \\fB\\$3\\fR .fi .IP .. .\" # CS - begin code excerpt .de CS .RS .nf .ta .25i .5i .75i 1i .. .\" # CE - end code excerpt .de CE .fi .RE .. .\" # UL - underline word .de UL \\$1\l'|0\(ul'\\$2 .. .\" # QW - apply quotation marks to word .de QW .ie '\\*(lq'"' ``\\$1''\\$2 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\$2 .. .\" # PQ - apply parens and quotation marks to word .de PQ .ie '\\*(lq'"' (``\\$1''\\$2)\\$3 .\"" fix emacs highlighting .el (\\*(lq\\$1\\*(rq\\$2)\\$3 .. .\" # QR - quoted range .de QR .ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3 .. .\" # MT - "empty" string .de MT .QW "" .. .BS .SH NAME nameserv \- Name service facility, Client .SH SYNOPSIS package require \fBTcl 8\&.4\fR .sp package require \fBnameserv ?0\&.4\&.2?\fR .sp package require \fBcomm \fR .sp package require \fBlogger \fR .sp \fB::nameserv::bind\fR \fIname\fR \fIdata\fR .sp \fB::nameserv::release\fR .sp \fB::nameserv::search\fR ?\fB-async\fR|\fB-continuous\fR? ?\fIpattern\fR? .sp \fB::nameserv::protocol\fR .sp \fB::nameserv::server_protocol\fR .sp \fB::nameserv::server_features\fR .sp \fB::nameserv::cget\fR \fB-option\fR .sp \fB::nameserv::configure\fR .sp \fB::nameserv::configure\fR \fB-option\fR .sp \fB::nameserv::configure\fR \fB-option\fR \fIvalue\fR\&.\&.\&. .sp \fB$result\fR \fBdestroy\fR .sp \fB$result\fR \fBfilled\fR .sp \fB$result\fR \fBget\fR \fIname\fR .sp \fB$result\fR \fBnames\fR .sp \fB$result\fR \fBsize\fR .sp \fB$result\fR \fBgetall\fR ?\fIpattern\fR? .sp .BE .SH DESCRIPTION Please read \fIName service facility, introduction\fR first\&. .PP This package provides a client for the name service facility implemented by the package \fBnameserv::server\fR\&. .PP This service is built in top of and for the package \fBcomm\fR\&. It has nothing to do with the Internet's Domain Name System\&. If the reader is looking for a package dealing with that please see Tcllib's packages \fBdns\fR and \fBresolv\fR\&. .SH API The package exports eight commands, as specified below: .TP \fB::nameserv::bind\fR \fIname\fR \fIdata\fR The caller of this command registers the given \fIname\fR as its name in the configured name service, and additionally associates a piece of \fIdata\fR with it\&. The service does nothing with this information beyond storing it and delivering it as part of search results\&. The meaning is entirely up to the applications using the name service\&. .sp A generally useful choice would for example be an identifier for a communication endpoint managed by the package \fBcomm\fR\&. Anybody retrieving the name becomes immediately able to talk to this endpoint, i\&.e\&. the registering application\&. .sp Of further importance is that a caller can register itself under more than one name, and each name can have its own piece of \fIdata\fR\&. .sp Note that the name service, and thwerefore this command, will throw an error if the chosen name is already registered\&. .TP \fB::nameserv::release\fR Invoking this command releases all names (and their data) registered by all previous calls to \fB::nameserv::bind\fR of this client\&. Note that the name service will run this command implicitly when it loses the connection to this client\&. .TP \fB::nameserv::search\fR ?\fB-async\fR|\fB-continuous\fR? ?\fIpattern\fR? This command searches the name service for all registered names matching the specified glob-\fIpattern\fR\&. If not specified the pattern defaults to \fB*\fR, matching everything\&. The result of the command is a dictionary mapping the matching names to the data associated with them at \fIbind\fR-time\&. .sp If either option \fB-async\fR or \fB-continuous\fR were specified the result of this command changes and becomes the Tcl command of an object holding the actual result\&. These two options are supported if and only if the service the client is connected to supports the protocol feature \fISearch/Continuous\fR\&. .sp For \fB-async\fR the result object is asynchronously filled with the entries matching the pattern at the time of the search and then not modified any more\&. The option \fB-continuous\fR extends this behaviour by additionally continuously monitoring the service for the addition and removal of entries which match the pattern, and updating the object's contents appropriately\&. .sp \fINote\fR that the caller is responsible for configuring the object with a callback for proper notification when the current result (or further changes) arrive\&. .sp For more information about this object see section \fBASYNCHRONOUS AND CONTINUOUS SEARCHES\fR\&. .TP \fB::nameserv::protocol\fR This command returns the highest version of the name service protocol supported by the package\&. .TP \fB::nameserv::server_protocol\fR This command returns the highest version of the name service protocol supported by the name service the client is currently connected to\&. .TP \fB::nameserv::server_features\fR This command returns a list containing the names of the features of the name service protocol which are supported by the name service the client is currently connected to\&. .TP \fB::nameserv::cget\fR \fB-option\fR This command returns the currently configured value for the specified \fB-option\fR\&. The list of supported options and their meaning can be found in section \fBOPTIONS\fR\&. .TP \fB::nameserv::configure\fR In this form the command returns a dictionary of all supported options, and their current values\&. The list of supported options and their meaning can be found in section \fBOPTIONS\fR\&. .TP \fB::nameserv::configure\fR \fB-option\fR In this form the command is an alias for "\fB::nameserv::cget\fR \fB-option\fR]"\&. The list of supported options and their meaning can be found in section \fBOPTIONS\fR\&. .TP \fB::nameserv::configure\fR \fB-option\fR \fIvalue\fR\&.\&.\&. In this form the command is used to configure one or more of the supported options\&. At least one option has to be specified, and each option is followed by its new value\&. The list of supported options and their meaning can be found in section \fBOPTIONS\fR\&. .sp This form can be used only as long as the client has not contacted the name service yet\&. After contact has been made reconfiguration is not possible anymore\&. This means that this form of the command is for the initalization of the client before it use\&. The command forcing a contact with the name service are .RS .TP \fBbind\fR .TP \fBrelease\fR .TP \fBsearch\fR .TP \fBserver_protocol\fR .TP \fBserver_features\fR .RE .PP .SH "CONNECTION HANDLING" The client automatically connects to the service when one of the commands below is run for the first time, or whenever one of the commands is run after the connection was lost, when it was lost\&. .PP .TP \fBbind\fR .TP \fBrelease\fR .TP \fBsearch\fR .TP \fBserver_protocol\fR .TP \fBserver_features\fR .PP .PP Since version 0\&.2 of the client it will generate an event when the connection is lost, allowing higher layers to perform additional actions\&. This is done via the support package \fBuevent\fR\&. This and all other name service related packages hereby reserve the uevent-tag \fInameserv\fR\&. All their events will be posted to that tag\&. .SH EVENTS This package generates only one event, \fIlost-connection\fR\&. The detail information provided to that event is a Tcl dictionary\&. The only key contained in the dictionnary is \fBreason\fR, and its value will be a string describing why the connection was lost\&. This string is supplied by the underlying communication package, i\&.e\&. \fBcomm\fR\&. .SH OPTIONS The options supported by the client are for the specification of which name service to contact, i\&.e\&. of the location of the name service\&. They are: .TP \fB-host\fR \fIname\fR|\fIipaddress\fR This option specifies the host name service to contact is running on, either by \fIname\fR, or by \fIipaddress\fR\&. The initial default is \fBlocalhost\fR, i\&.e\&. it is expected to contact a name service running on the same host as the application using this package\&. .TP \fB-port\fR \fInumber\fR This option specifies the port the name service to contact is listening on\&. It has to be a positive integer number (> 0) not greater than 65536 (unsigned short)\&. The initial default is the number returned by the command \fB::nameserv::common::port\fR, as provided by the package \fB::nameserv::common\fR\&. .PP .SH "ASYNCHRONOUS AND CONTINUOUS SEARCHES" Asynchronous and continuous searches are invoked by using either option \fB-async\fR or \fB-continuous\fR as argument to the command \fB::nameserv::search\fR\&. .PP \fINote\fR that these two options are supported if and only if the service the client is connected to supports the protocol feature \fISearch/Continuous\fR\&. The service provided by the package \fB::nameserv::server\fR does this since version 0\&.3\&. .PP For such searches the result of the search command is the Tcl command of an object holding the actual result\&. The API provided by these objects is: .TP Options: .RS .TP \fB-command\fR \fIcommand_prefix\fR This option has to be set if a user of the result object wishes to get asynchronous notifications when the search result or changes to it arrive\&. .sp \fINote\fR that while it is possible to poll for the arrival of the initial search result via the method \fBfilled\fR, and for subsequent changes by comparing the output of method \fBgetall\fR against a saved copy, this is not the recommended behaviour\&. Setting the \fB-command\fR callback and processing the notifications as they arrive is much more efficient\&. .sp The \fIcommand_prefix\fR is called with two arguments, the type of change, and the data of the change\&. The type is either \fBadd\fR or \fBremove\fR, indicating new data, or deleted data, respectively\&. The data of the change is always a dictionary listing the added/removed names and their associated data\&. .sp The first change reported for a search is always the set of matching entries at the time of the search\&. .RE .TP Methods: .RS .TP \fB$result\fR \fBdestroy\fR Destroys the object and cancels any continuous monitoring of the service the object may have had active\&. .TP \fB$result\fR \fBfilled\fR The result is a boolean value indicating whether the search result has already arrived (\fBTrue\fR), or not (\fBFalse\fR)\&. .TP \fB$result\fR \fBget\fR \fIname\fR Returns the data associated with the given \fIname\fR at \fIbind\fR-time\&. .TP \fB$result\fR \fBnames\fR Returns a list containing all names known to the object at the time of the invokation\&. .TP \fB$result\fR \fBsize\fR Returns an integer value specifying the size of the result at the time of the invokation\&. .TP \fB$result\fR \fBgetall\fR ?\fIpattern\fR? Returns a dictionary containing the search result at the time of the invokation, mapping the matching names to the data associated with them at \fIbind\fR-time\&. .RE .PP .SH HISTORY .TP 0\&.3\&.1 Fixed SF Bug 1954771\&. .TP 0\&.3 Extended the client with the ability to perform asynchronous and continuous searches\&. .TP 0\&.2 Extended the client with the ability to generate events when it loses its connection to the name service\&. Based on package \fBuevent\fR\&. .TP 0\&.1 Initial implementation of the client\&. .PP .SH "BUGS, IDEAS, FEEDBACK" This document, and the package it describes, will undoubtedly contain bugs and other problems\&. Please report such in the category \fInameserv\fR of the \fITcllib Trackers\fR [http://core\&.tcl\&.tk/tcllib/reportlist]\&. Please also report any ideas for enhancements you may have for either package and/or documentation\&. .PP When proposing code changes, please provide \fIunified diffs\fR, i\&.e the output of \fBdiff -u\fR\&. .PP Note further that \fIattachments\fR are strongly preferred over inlined patches\&. Attachments can be made by going to the \fBEdit\fR form of the ticket immediately after its creation, and then using the left-most button in the secondary navigation bar\&. .SH "SEE ALSO" nameserv::common(3tcl), nameserv::server(3tcl) .SH KEYWORDS client, name service .SH CATEGORY Networking .SH COPYRIGHT .nf Copyright (c) 2007-2008 Andreas Kupries .fi