'\" '\" Generated from file 'doctoc_lang_intro\&.man' by tcllib/doctools with format 'nroff' '\" Copyright (c) 2007 Andreas Kupries '\" .TH "doctoc_lang_intro" 3tcl 1\&.0 tcllib "Documentation tools" .\" The -*- nroff -*- definitions below are for supplemental macros used .\" in Tcl/Tk manual entries. .\" .\" .AP type name in/out ?indent? .\" Start paragraph describing an argument to a library procedure. .\" type is type of argument (int, etc.), in/out is either "in", "out", .\" or "in/out" to describe whether procedure reads or modifies arg, .\" and indent is equivalent to second arg of .IP (shouldn't ever be .\" needed; use .AS below instead) .\" .\" .AS ?type? ?name? .\" Give maximum sizes of arguments for setting tab stops. Type and .\" name are examples of largest possible arguments that will be passed .\" to .AP later. If args are omitted, default tab stops are used. .\" .\" .BS .\" Start box enclosure. From here until next .BE, everything will be .\" enclosed in one large box. .\" .\" .BE .\" End of box enclosure. .\" .\" .CS .\" Begin code excerpt. .\" .\" .CE .\" End code excerpt. .\" .\" .VS ?version? ?br? .\" Begin vertical sidebar, for use in marking newly-changed parts .\" of man pages. The first argument is ignored and used for recording .\" the version when the .VS was added, so that the sidebars can be .\" found and removed when they reach a certain age. If another argument .\" is present, then a line break is forced before starting the sidebar. .\" .\" .VE .\" End of vertical sidebar. .\" .\" .DS .\" Begin an indented unfilled display. .\" .\" .DE .\" End of indented unfilled display. .\" .\" .SO ?manpage? .\" Start of list of standard options for a Tk widget. The manpage .\" argument defines where to look up the standard options; if .\" omitted, defaults to "options". The options follow on successive .\" lines, in three columns separated by tabs. .\" .\" .SE .\" End of list of standard options for a Tk widget. .\" .\" .OP cmdName dbName dbClass .\" Start of description of a specific option. cmdName gives the .\" option's name as specified in the class command, dbName gives .\" the option's name in the option database, and dbClass gives .\" the option's class in the option database. .\" .\" .UL arg1 arg2 .\" Print arg1 underlined, then print arg2 normally. .\" .\" .QW arg1 ?arg2? .\" Print arg1 in quotes, then arg2 normally (for trailing punctuation). .\" .\" .PQ arg1 ?arg2? .\" Print an open parenthesis, arg1 in quotes, then arg2 normally .\" (for trailing punctuation) and then a closing parenthesis. .\" .\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. .if t .wh -1.3i ^B .nr ^l \n(.l .ad b .\" # Start an argument description .de AP .ie !"\\$4"" .TP \\$4 .el \{\ . ie !"\\$2"" .TP \\n()Cu . el .TP 15 .\} .ta \\n()Au \\n()Bu .ie !"\\$3"" \{\ \&\\$1 \\fI\\$2\\fP (\\$3) .\".b .\} .el \{\ .br .ie !"\\$2"" \{\ \&\\$1 \\fI\\$2\\fP .\} .el \{\ \&\\fI\\$1\\fP .\} .\} .. .\" # define tabbing values for .AP .de AS .nr )A 10n .if !"\\$1"" .nr )A \\w'\\$1'u+3n .nr )B \\n()Au+15n .\" .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n .nr )C \\n()Bu+\\w'(in/out)'u+2n .. .AS Tcl_Interp Tcl_CreateInterp in/out .\" # BS - start boxed text .\" # ^y = starting y location .\" # ^b = 1 .de BS .br .mk ^y .nr ^b 1u .if n .nf .if n .ti 0 .if n \l'\\n(.lu\(ul' .if n .fi .. .\" # BE - end boxed text (draw box now) .de BE .nf .ti 0 .mk ^t .ie n \l'\\n(^lu\(ul' .el \{\ .\" Draw four-sided box normally, but don't draw top of .\" box if the box started on an earlier page. .ie !\\n(^b-1 \{\ \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .el \}\ \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .\} .fi .br .nr ^b 0 .. .\" # VS - start vertical sidebar .\" # ^Y = starting y location .\" # ^v = 1 (for troff; for nroff this doesn't matter) .de VS .if !"\\$2"" .br .mk ^Y .ie n 'mc \s12\(br\s0 .el .nr ^v 1u .. .\" # VE - end of vertical sidebar .de VE .ie n 'mc .el \{\ .ev 2 .nf .ti 0 .mk ^t \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' .sp -1 .fi .ev .\} .nr ^v 0 .. .\" # Special macro to handle page bottom: finish off current .\" # box/sidebar if in box/sidebar mode, then invoked standard .\" # page bottom macro. .de ^B .ev 2 'ti 0 'nf .mk ^t .if \\n(^b \{\ .\" Draw three-sided box if this is the box's first page, .\" draw two sides but no top otherwise. .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .\} .if \\n(^v \{\ .nr ^x \\n(^tu+1v-\\n(^Yu \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c .\} .bp 'fi .ev .if \\n(^b \{\ .mk ^y .nr ^b 2 .\} .if \\n(^v \{\ .mk ^Y .\} .. .\" # DS - begin display .de DS .RS .nf .sp .. .\" # DE - end display .de DE .fi .RE .sp .. .\" # SO - start of list of standard options .de SO 'ie '\\$1'' .ds So \\fBoptions\\fR 'el .ds So \\fB\\$1\\fR .SH "STANDARD OPTIONS" .LP .nf .ta 5.5c 11c .ft B .. .\" # SE - end of list of standard options .de SE .fi .ft R .LP See the \\*(So manual entry for details on the standard options. .. .\" # OP - start of full description for a single option .de OP .LP .nf .ta 4c Command-Line Name: \\fB\\$1\\fR Database Name: \\fB\\$2\\fR Database Class: \\fB\\$3\\fR .fi .IP .. .\" # CS - begin code excerpt .de CS .RS .nf .ta .25i .5i .75i 1i .. .\" # CE - end code excerpt .de CE .fi .RE .. .\" # UL - underline word .de UL \\$1\l'|0\(ul'\\$2 .. .\" # QW - apply quotation marks to word .de QW .ie '\\*(lq'"' ``\\$1''\\$2 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\$2 .. .\" # PQ - apply parens and quotation marks to word .de PQ .ie '\\*(lq'"' (``\\$1''\\$2)\\$3 .\"" fix emacs highlighting .el (\\*(lq\\$1\\*(rq\\$2)\\$3 .. .\" # QR - quoted range .de QR .ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3 .. .\" # MT - "empty" string .de MT .QW "" .. .BS .SH NAME doctoc_lang_intro \- doctoc language introduction .SH DESCRIPTION .PP This document is an informal introduction to version 1\&.1 of the doctoc markup language based on a multitude of examples\&. After reading this a writer should be ready to understand the two parts of the formal specification, i\&.e\&. the \fIdoctoc language syntax\fR specification and the \fIdoctoc language command reference\fR\&. .SS FUNDAMENTALS While the \fIdoctoc markup language\fR is quite similar to the \fIdoctools markup language\fR, in the broadest terms possible, there is one key difference\&. A table of contents consists essentially only of markup commands, with no plain text interspersed between them, except for whitespace\&. .PP Each markup command is a Tcl command surrounded by a matching pair of \fB[\fR and \fB]\fR\&. Inside of these delimiters the usual rules for a Tcl command apply with regard to word quotation, nested commands, continuation lines, etc\&. I\&.e\&. .PP .CS \&.\&.\&. [division_start {Appendix 1}] \&.\&.\&. .CE .CS \&.\&.\&. [item thefile \\\\ label {file description}] \&.\&.\&. .CE .SS "BASIC STRUCTURE" The most simple document which can be written in doctoc is .CS [toc_begin GROUPTITLE TITLE] [toc_end] .CE This also shows us that all doctoc documents consist of only one part where we will list \fIitems\fR and \fIdivisions\fR\&. .PP The user is free to mix these as she sees fit\&. This is a change from version 1 of the language, which did not allow this mixing, but only the use of either a series of items or a series of divisions\&. .PP We will discuss the commands for each of these two possibilities in the next sections\&. .SS ITEMS Use the command \fBitem\fR to put an \fIitem\fR into a table of contents\&. This is essentially a reference to a section, subsection, etc\&. in the document, or set of documents, the table of contents is for\&. The command takes three arguments, a symbolic name for the file the item is for and two text to label the item and describe the referenced section\&. .PP Symbolic names are used to preserve the convertibility of this format to any output format\&. The actual name of any file will be inserted by the chosen formatting engine when converting the input, based on a mapping from symbolic to actual names given to the engine\&. .PP Here a made up example for a table of contents of this document: .CS [toc_begin Doctoc {Language Introduction}] [\fBitem 1 DESCRIPTION\fR] [\fBitem 1\&.1 {Basic structure}\fR] [\fBitem 1\&.2 Items\fR] [\fBitem 1\&.3 Divisions\fR] [\fBitem 2 {FURTHER READING}\fR] [toc_end] .CE .SS DIVISIONS One thing of notice in the last example in the previous section is that the referenced sections actually had a nested structure, something which was expressed in the item labels, by using a common prefix for all the sections nested under section 1\&. .PP This kind of structure can be made more explicit in the doctoc language by using divisions\&. Instead of using a series of plain items we use a series of divisions for the major references, and then place the nested items inside of these\&. .PP Of course, instead of the nested items we can again use divisions and thus nest arbitrarily deep\&. .PP A division is marked by two commands instead of one, one to start it, the other to close the last opened division\&. They are: .TP \fBdivision_start\fR This command opens a new division\&. It takes one or two arguments, the title of the division, and the symbolic name of the file it refers to\&. The latter is optional\&. If the symbolic filename is present then the section title should link to the referenced document, if links are supported by the output format\&. .TP \fBdivision_end\fR This command closes the last opened and not yet closed division\&. .PP .PP Using this we can recast the last example like this .CS [toc_begin Doctoc {Language Introduction}] [\fBdivision_start DESCRIPTION\fR] [item 1 {Basic structure}] [item 2 Items] [item 3 Divisions] [\fBdivision_end\fR] [\fBdivision_start {FURTHER READING}\fR] [\fBdivision_end\fR] [toc_end] .CE .PP Or, to demonstrate deeper nesting .CS [toc_begin Doctoc {Language Introduction}] [\fBdivision_start DESCRIPTION\fR] [\fBdivision_start {Basic structure}\fR] [item 1 Do] [item 2 Re] [\fBdivision_end\fR] [\fBdivision_start Items\fR] [item a Fi] [item b Fo] [item c Fa] [\fBdivision_end\fR] [\fBdivision_start Divisions\fR] [item 1 Sub] [item 1 Zero] [\fBdivision_end\fR] [\fBdivision_end\fR] [\fBdivision_start {FURTHER READING}\fR] [\fBdivision_end\fR] [toc_end] .CE And do not forget, it is possible to freely mix items and divisions, and to have empty divisions\&. .CS [toc_begin Doctoc {Language Introduction}] [item 1 Do] [\fBdivision_start DESCRIPTION\fR] [\fBdivision_start {Basic structure}\fR] [item 2 Re] [\fBdivision_end\fR] [item a Fi] [\fBdivision_start Items\fR] [item b Fo] [item c Fa] [\fBdivision_end\fR] [\fBdivision_start Divisions\fR] [\fBdivision_end\fR] [\fBdivision_end\fR] [\fBdivision_start {FURTHER READING}\fR] [\fBdivision_end\fR] [toc_end] .CE .SS "ADVANCED STRUCTURE" In all previous examples we fudged a bit regarding the markup actually allowed to be used before the \fBtoc_begin\fR command opening the document\&. .PP Instead of only whitespace the two templating commands \fBinclude\fR and \fBvset\fR are also allowed, to enable the writer to either set and/or import configuration settings relevant to the table of contents\&. I\&.e\&. it is possible to write .CS [\fBinclude FILE\fR] [\fBvset VAR VALUE\fR] [toc_begin GROUPTITLE TITLE] \&.\&.\&. [toc_end] .CE Even more important, these two commands are allowed anywhere where a markup command is allowed, without regard for any other structure\&. .CS [toc_begin GROUPTITLE TITLE] [\fBinclude FILE\fR] [\fBvset VAR VALUE\fR] \&.\&.\&. [toc_end] .CE The only restriction \fBinclude\fR has to obey is that the contents of the included file must be valid at the place of the inclusion\&. I\&.e\&. a file included before \fBtoc_begin\fR may contain only the templating commands \fBvset\fR and \fBinclude\fR, a file included in a division may contain only items or divisions commands, etc\&. .SS ESCAPES Beyond the 6 commands shown so far we have two more available\&. However their function is not the marking up of toc structure, but the insertion of characters, namely \fB[\fR and \fB]\fR\&. These commands, \fBlb\fR and \fBrb\fR respectively, are required because our use of [ and ] to bracket markup commands makes it impossible to directly use [ and ] within the text\&. .PP Our example of their use are the sources of the last sentence in the previous paragraph, with some highlighting added\&. .CS \&.\&.\&. These commands, [cmd lb] and [cmd lb] respectively, are required because our use of [\fBlb\fR] and [\fBrb\fR] to bracket markup commands makes it impossible to directly use [\fBlb\fR] and [\fBrb\fR] within the text\&. \&.\&.\&. .CE .SH "FURTHER READING" Now that this document has been digested the reader, assumed to be a \fIwriter\fR of documentation should be fortified enough to be able to understand the formal \fIdoctoc language syntax\fR specification as well\&. From here on out the \fIdoctoc language command reference\fR will also serve as the detailed specification and cheat sheet for all available commands and their syntax\&. .PP To be able to validate a document while writing it, it is also recommended to familiarize oneself with Tclapps' ultra-configurable \fBdtp\fR\&. .PP On the other hand, doctoc is perfectly suited for the automatic generation from doctools documents, and this is the route Tcllib's easy and simple \fBdtplite\fR goes, creating a table of contents for a set of documents behind the scenes, without the writer having to do so on their own\&. .SH "BUGS, IDEAS, FEEDBACK" This document, and the package it describes, will undoubtedly contain bugs and other problems\&. Please report such in the category \fIdoctools\fR of the \fITcllib Trackers\fR [http://core\&.tcl\&.tk/tcllib/reportlist]\&. Please also report any ideas for enhancements you may have for either package and/or documentation\&. .PP When proposing code changes, please provide \fIunified diffs\fR, i\&.e the output of \fBdiff -u\fR\&. .PP Note further that \fIattachments\fR are strongly preferred over inlined patches\&. Attachments can be made by going to the \fBEdit\fR form of the ticket immediately after its creation, and then using the left-most button in the secondary navigation bar\&. .SH "SEE ALSO" doctoc_intro, doctoc_lang_cmdref, doctoc_lang_syntax .SH KEYWORDS doctoc commands, doctoc language, doctoc markup, doctoc syntax, markup, semantic markup .SH CATEGORY Documentation tools .SH COPYRIGHT .nf Copyright (c) 2007 Andreas Kupries .fi