'\"
'\" Copyright (c) 2003 George Petasis <petasis@iit.demokritos.gr>.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH unload 3tcl 8.5 Tcl "Tcl Built-In Commands"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
unload \- Unload machine code
.SH SYNOPSIS
\fBunload \fR?\fIswitches\fR? \fIfileName\fR
.br
\fBunload \fR?\fIswitches\fR? \fIfileName packageName\fR
.br
\fBunload \fR?\fIswitches\fR? \fIfileName packageName interp\fR
.BE
.SH DESCRIPTION
.PP
This command tries to unload shared libraries previously loaded
with \fBload\fR from the application's address space.  \fIfileName\fR
is the name of the file containing the library file to be unload;  it
must be the same as the filename provided to \fBload\fR for
loading the library.
The \fIpackageName\fR argument is the name of the package (as
determined by or passed to \fBload\fR), and is used to
compute the name of the unload procedure; if not supplied, it is
computed from \fIfileName\fR in the same manner as \fBload\fR.
The \fIinterp\fR argument is the path name of the interpreter from
which to unload the package (see the \fBinterp\fR manual entry for
details); if \fIinterp\fR is omitted, it defaults to the
interpreter in which the \fBunload\fR command was invoked.
.PP
If the initial arguments to \fBunload\fR start with \fB\-\fR then
they are treated as switches.  The following switches are
currently supported:
.TP
\fB\-nocomplain\fR
.
Suppresses all error messages. If this switch is given, \fBunload\fR will
never report an error.
.TP
\fB\-keeplibrary\fR
.
This switch will prevent \fBunload\fR from issuing the operating system call
that will unload the library from the process.
.TP
\fB\-\|\-\fR
.
Marks the end of switches.  The argument following this one will
be treated as a \fIfileName\fR even if it starts with a \fB\-\fR.
.SS "UNLOAD OPERATION"
.PP
When a file containing a shared library is loaded through the
\fBload\fR command, Tcl associates two reference counts to the library
file. The first counter shows how many times the library has been
loaded into normal (trusted) interpreters while the second describes how many
times the library has been loaded into safe interpreters. As a file containing
a shared library can be loaded only once by Tcl (with the first \fBload\fR
call on the file), these counters track how many interpreters use the library.
Each subsequent call to \fBload\fR after the first simply increments the
proper reference count.
.PP
\fBunload\fR works in the opposite direction. As a first step, \fBunload\fR
will check whether the library is unloadable: an unloadable library exports
a special unload procedure. The name of the unload procedure is determined by
\fIpackageName\fR and whether or not the target interpreter
is a safe one.  For normal interpreters the name of the initialization
procedure will have the form \fIpkg\fB_Unload\fR, where \fIpkg\fR
is the same as \fIpackageName\fR except that the first letter is
converted to upper case and all other letters
are converted to lower case.  For example, if \fIpackageName\fR is
\fBfoo\fR or \fBFOo\fR, the initialization procedure's name will
be \fBFoo_Unload\fR.
If the target interpreter is a safe interpreter, then the name
of the initialization procedure will be \fIpkg\fB_SafeUnload\fR
instead of \fIpkg\fB_Unload\fR.
.PP
If \fBunload\fR determines that a library is not unloadable (or unload
functionality has been disabled during compilation), an error will be returned.
If the library is unloadable, then \fBunload\fR will call the unload
procedure. If the unload procedure returns \fBTCL_OK\fR, \fBunload\fR will proceed
and decrease the proper reference count (depending on the target interpreter
type). When both reference counts have reached 0, the library will be
detached from the process.
.SS "UNLOAD HOOK PROTOTYPE"
.PP
The unload procedure must match the following prototype:
.PP
.CS
typedef int \fBTcl_PackageUnloadProc\fR(
        Tcl_Interp *\fIinterp\fR,
        int \fIflags\fR);
.CE
.PP
The \fIinterp\fR argument identifies the interpreter from which the
library is to be unloaded.  The unload procedure must return
\fBTCL_OK\fR or \fBTCL_ERROR\fR to indicate whether or not it completed
successfully;  in the event of an error it should set the interpreter's result
to point to an error message.  In this case, the result of the
\fBunload\fR command will be the result returned by the unload procedure.
.PP
The \fIflags\fR argument can be either \fBTCL_UNLOAD_DETACH_FROM_INTERPRETER\fR
or \fBTCL_UNLOAD_DETACH_FROM_PROCESS\fR. In case the library will remain
attached to the process after the unload procedure returns (i.e. because
the library is used by other interpreters),
\fBTCL_UNLOAD_DETACH_FROM_INTERPRETER\fR will be defined. However, if the
library is used only by the target interpreter and the library will be
detached from the application as soon as the unload procedure returns,
the \fIflags\fR argument will be set to \fBTCL_UNLOAD_DETACH_FROM_PROCESS\fR.
.SS NOTES
.PP
The \fBunload\fR command cannot unload libraries that are statically
linked with the application.
If \fIfileName\fR is an empty string, then the \fIpackageName\fR argument must
be specified.
.PP
If \fIpackageName\fR is omitted or specified as an empty string,
Tcl tries to guess the name of the package.
This may be done differently on different platforms.
The default guess, which is used on most UNIX platforms, is to
take the last element of \fIfileName\fR, strip off the first
three characters if they are \fBlib\fR, and use any following
alphabetic and underline characters as the module name.
For example, the command \fBunload libxyz4.2.so\fR uses the module
name \fBxyz\fR and the command \fBunload bin/last.so {}\fR uses the
module name \fBlast\fR.
.SH "PORTABILITY ISSUES"
.TP
\fBUnix\fR\0\0\0\0\0
.
Not all unix operating systems support library unloading. Under such
an operating system \fBunload\fR returns an error (unless \fB\-nocomplain\fR
has been specified).
.SH BUGS
.PP
If the same file is \fBload\fRed by different \fIfileName\fRs, it will
be loaded into the process's address space multiple times.  The
behavior of this varies from system to system (some systems may
detect the redundant loads, others may not). In case a library has been
silently detached by the operating system (and as a result Tcl thinks the
library is still loaded), it may be dangerous to use
\fBunload\fR on such a library (as the library will be completely detached
from the application while some interpreters will continue to use it).
.SH EXAMPLE
.PP
If an unloadable module in the file \fBfoobar.dll\fR had been loaded
using the \fBload\fR command like this (on Windows):
.PP
.CS
load c:/some/dir/foobar.dll
.CE
.PP
then it would be unloaded like this:
.PP
.CS
\fBunload\fR c:/some/dir/foobar.dll
.CE
.PP
This allows a C code module to be installed temporarily into a
long-running Tcl program and then removed again (either because it is
no longer needed or because it is being updated with a new version)
without having to shut down the overall Tcl process.
.SH "SEE ALSO"
info sharedlibextension, load(3tcl), safe(3tcl)
.SH KEYWORDS
binary code, unloading, safe interpreter, shared library
.\" Local Variables:
.\" mode: nroff
.\" End: