'\" '\" Copyright (c) 1995-1997 Sun Microsystems, Inc. '\" Copyright (c) 1998-2000 by Ajuba Solutions. '\" Copyright (c) 2004 ActiveState Corporation. '\" '\" See the file "license.terms" for information on usage and redistribution '\" of this file, and for a DISCLAIMER OF ALL WARRANTIES. '\" .TH "http" 3tcl 2.9 http "Tcl Bundled Packages" .\" The -*- nroff -*- definitions below are for supplemental macros used .\" in Tcl/Tk manual entries. .\" .\" .AP type name in/out ?indent? .\" Start paragraph describing an argument to a library procedure. .\" type is type of argument (int, etc.), in/out is either "in", "out", .\" or "in/out" to describe whether procedure reads or modifies arg, .\" and indent is equivalent to second arg of .IP (shouldn't ever be .\" needed; use .AS below instead) .\" .\" .AS ?type? ?name? .\" Give maximum sizes of arguments for setting tab stops. Type and .\" name are examples of largest possible arguments that will be passed .\" to .AP later. If args are omitted, default tab stops are used. .\" .\" .BS .\" Start box enclosure. From here until next .BE, everything will be .\" enclosed in one large box. .\" .\" .BE .\" End of box enclosure. .\" .\" .CS .\" Begin code excerpt. .\" .\" .CE .\" End code excerpt. .\" .\" .VS ?version? ?br? .\" Begin vertical sidebar, for use in marking newly-changed parts .\" of man pages. The first argument is ignored and used for recording .\" the version when the .VS was added, so that the sidebars can be .\" found and removed when they reach a certain age. If another argument .\" is present, then a line break is forced before starting the sidebar. .\" .\" .VE .\" End of vertical sidebar. .\" .\" .DS .\" Begin an indented unfilled display. .\" .\" .DE .\" End of indented unfilled display. .\" .\" .SO ?manpage? .\" Start of list of standard options for a Tk widget. The manpage .\" argument defines where to look up the standard options; if .\" omitted, defaults to "options". The options follow on successive .\" lines, in three columns separated by tabs. .\" .\" .SE .\" End of list of standard options for a Tk widget. .\" .\" .OP cmdName dbName dbClass .\" Start of description of a specific option. cmdName gives the .\" option's name as specified in the class command, dbName gives .\" the option's name in the option database, and dbClass gives .\" the option's class in the option database. .\" .\" .UL arg1 arg2 .\" Print arg1 underlined, then print arg2 normally. .\" .\" .QW arg1 ?arg2? .\" Print arg1 in quotes, then arg2 normally (for trailing punctuation). .\" .\" .PQ arg1 ?arg2? .\" Print an open parenthesis, arg1 in quotes, then arg2 normally .\" (for trailing punctuation) and then a closing parenthesis. .\" .\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. .if t .wh -1.3i ^B .nr ^l \n(.l .ad b .\" # Start an argument description .de AP .ie !"\\$4"" .TP \\$4 .el \{\ . ie !"\\$2"" .TP \\n()Cu . el .TP 15 .\} .ta \\n()Au \\n()Bu .ie !"\\$3"" \{\ \&\\$1 \\fI\\$2\\fP (\\$3) .\".b .\} .el \{\ .br .ie !"\\$2"" \{\ \&\\$1 \\fI\\$2\\fP .\} .el \{\ \&\\fI\\$1\\fP .\} .\} .. .\" # define tabbing values for .AP .de AS .nr )A 10n .if !"\\$1"" .nr )A \\w'\\$1'u+3n .nr )B \\n()Au+15n .\" .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n .nr )C \\n()Bu+\\w'(in/out)'u+2n .. .AS Tcl_Interp Tcl_CreateInterp in/out .\" # BS - start boxed text .\" # ^y = starting y location .\" # ^b = 1 .de BS .br .mk ^y .nr ^b 1u .if n .nf .if n .ti 0 .if n \l'\\n(.lu\(ul' .if n .fi .. .\" # BE - end boxed text (draw box now) .de BE .nf .ti 0 .mk ^t .ie n \l'\\n(^lu\(ul' .el \{\ .\" Draw four-sided box normally, but don't draw top of .\" box if the box started on an earlier page. .ie !\\n(^b-1 \{\ \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .el \}\ \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .\} .fi .br .nr ^b 0 .. .\" # VS - start vertical sidebar .\" # ^Y = starting y location .\" # ^v = 1 (for troff; for nroff this doesn't matter) .de VS .if !"\\$2"" .br .mk ^Y .ie n 'mc \s12\(br\s0 .el .nr ^v 1u .. .\" # VE - end of vertical sidebar .de VE .ie n 'mc .el \{\ .ev 2 .nf .ti 0 .mk ^t \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' .sp -1 .fi .ev .\} .nr ^v 0 .. .\" # Special macro to handle page bottom: finish off current .\" # box/sidebar if in box/sidebar mode, then invoked standard .\" # page bottom macro. .de ^B .ev 2 'ti 0 'nf .mk ^t .if \\n(^b \{\ .\" Draw three-sided box if this is the box's first page, .\" draw two sides but no top otherwise. .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .\} .if \\n(^v \{\ .nr ^x \\n(^tu+1v-\\n(^Yu \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c .\} .bp 'fi .ev .if \\n(^b \{\ .mk ^y .nr ^b 2 .\} .if \\n(^v \{\ .mk ^Y .\} .. .\" # DS - begin display .de DS .RS .nf .sp .. .\" # DE - end display .de DE .fi .RE .sp .. .\" # SO - start of list of standard options .de SO 'ie '\\$1'' .ds So \\fBoptions\\fR 'el .ds So \\fB\\$1\\fR .SH "STANDARD OPTIONS" .LP .nf .ta 5.5c 11c .ft B .. .\" # SE - end of list of standard options .de SE .fi .ft R .LP See the \\*(So manual entry for details on the standard options. .. .\" # OP - start of full description for a single option .de OP .LP .nf .ta 4c Command-Line Name: \\fB\\$1\\fR Database Name: \\fB\\$2\\fR Database Class: \\fB\\$3\\fR .fi .IP .. .\" # CS - begin code excerpt .de CS .RS .nf .ta .25i .5i .75i 1i .. .\" # CE - end code excerpt .de CE .fi .RE .. .\" # UL - underline word .de UL \\$1\l'|0\(ul'\\$2 .. .\" # QW - apply quotation marks to word .de QW .ie '\\*(lq'"' ``\\$1''\\$2 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\$2 .. .\" # PQ - apply parens and quotation marks to word .de PQ .ie '\\*(lq'"' (``\\$1''\\$2)\\$3 .\"" fix emacs highlighting .el (\\*(lq\\$1\\*(rq\\$2)\\$3 .. .\" # QR - quoted range .de QR .ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3 .. .\" # MT - "empty" string .de MT .QW "" .. .BS '\" Note: do not modify the .SH NAME line immediately below! .SH NAME http \- Client-side implementation of the HTTP/1.1 protocol .SH SYNOPSIS \fBpackage require http ?2.8?\fR .\" See Also -useragent option documentation in body! .sp \fB::http::config ?\fI\-option value\fR ...? .sp \fB::http::geturl \fIurl\fR ?\fI\-option value\fR ...? .sp \fB::http::formatQuery\fR \fIkey value\fR ?\fIkey value\fR ...? .sp \fB::http::quoteString\fR \fIvalue\fR .sp \fB::http::reset\fR \fItoken\fR ?\fIwhy\fR? .sp \fB::http::wait \fItoken\fR .sp \fB::http::status \fItoken\fR .sp \fB::http::size \fItoken\fR .sp \fB::http::code \fItoken\fR .sp \fB::http::ncode \fItoken\fR .sp \fB::http::meta \fItoken\fR .sp \fB::http::data \fItoken\fR .sp \fB::http::error \fItoken\fR .sp \fB::http::cleanup \fItoken\fR .sp \fB::http::register \fIproto port command\fR .sp \fB::http::registerError \fIport\fR ?\fImessage\fR? .sp \fB::http::unregister \fIproto\fR .BE .SH DESCRIPTION .PP The \fBhttp\fR package provides the client side of the HTTP/1.1 protocol, as defined in RFC 7230 to RFC 7235, which supersede RFC 2616. The package implements the GET, POST, and HEAD operations of HTTP/1.1. It allows configuration of a proxy host to get through firewalls. The package is compatible with the \fBSafesock\fR security policy, so it can be used by untrusted applets to do URL fetching from a restricted set of hosts. This package can be extended to support additional HTTP transport protocols, such as HTTPS, by providing a custom \fBsocket\fR command, via \fB::http::register\fR. .PP The \fB::http::geturl\fR procedure does a HTTP transaction. Its \fIoptions \fR determine whether a GET, POST, or HEAD transaction is performed. The return value of \fB::http::geturl\fR is a token for the transaction. The value is also the name of an array in the ::http namespace that contains state information about the transaction. The elements of this array are described in the \fBSTATE ARRAY\fR section. .PP If the \fB\-command\fR option is specified, then the HTTP operation is done in the background. \fB::http::geturl\fR returns immediately after generating the HTTP request and the callback is invoked when the transaction completes. For this to work, the Tcl event loop must be active. In Tk applications this is always true. For pure-Tcl applications, the caller can use \fB::http::wait\fR after calling \fB::http::geturl\fR to start the event loop. .SH COMMANDS .TP \fB::http::config\fR ?\fIoptions\fR? . The \fB::http::config\fR command is used to set and query the name of the proxy server and port, and the User-Agent name used in the HTTP requests. If no options are specified, then the current configuration is returned. If a single argument is specified, then it should be one of the flags described below. In this case the current value of that setting is returned. Otherwise, the options should be a set of flags and values that define the configuration: .RS .TP \fB\-accept\fR \fImimetypes\fR . The Accept header of the request. The default is */*, which means that all types of documents are accepted. Otherwise you can supply a comma-separated list of mime type patterns that you are willing to receive. For example, .QW "image/gif, image/jpeg, text/*" . .TP \fB\-pipeline\fR \fIboolean\fR . Specifies whether HTTP/1.1 transactions on a persistent socket will be pipelined. See the \fBPERSISTENT SOCKETS\fR section for details. The default is 1. .TP \fB\-postfresh\fR \fIboolean\fR . Specifies whether requests that use the \fBPOST\fR method will always use a fresh socket, overriding the \fB-keepalive\fR option of command \fBhttp::geturl\fR. See the \fBPERSISTENT SOCKETS\fR section for details. The default is 0. .TP \fB\-proxyhost\fR \fIhostname\fR . The name of the proxy host, if any. If this value is the empty string, the URL host is contacted directly. .TP \fB\-proxyport\fR \fInumber\fR . The proxy port number. .TP \fB\-proxyfilter\fR \fIcommand\fR . The command is a callback that is made during \fB::http::geturl\fR to determine if a proxy is required for a given host. One argument, a host name, is added to \fIcommand\fR when it is invoked. If a proxy is required, the callback should return a two-element list containing the proxy server and proxy port. Otherwise the filter should return an empty list. The default filter returns the values of the \fB\-proxyhost\fR and \fB\-proxyport\fR settings if they are non-empty. .TP \fB\-repost\fR \fIboolean\fR . Specifies what to do if a POST request over a persistent connection fails because the server has half-closed the connection. If boolean \fBtrue\fR, the request will be automatically retried; if boolean \fBfalse\fR it will not, and the application that uses \fBhttp::geturl\fR is expected to seek user confirmation before retrying the POST. The value \fBtrue\fR should be used only under certain conditions. See the \fBPERSISTENT SOCKETS\fR section for details. The default is 0. .TP \fB\-urlencoding\fR \fIencoding\fR . The \fIencoding\fR used for creating the x-url-encoded URLs with \fB::http::formatQuery\fR and \fB::http::quoteString\fR. The default is \fButf-8\fR, as specified by RFC 2718. Prior to http 2.5 this was unspecified, and that behavior can be returned by specifying the empty string (\fB{}\fR), although \fIiso8859-1\fR is recommended to restore similar behavior but without the \fB::http::formatQuery\fR or \fB::http::quoteString\fR throwing an error processing non-latin-1 characters. .TP \fB\-useragent\fR \fIstring\fR . The value of the User-Agent header in the HTTP request. In an unsafe interpreter, the default value depends upon the operating system, and the version numbers of \fBhttp\fR and \fBTcl\fR, and is (for example) .QW "\fBMozilla/5.0 (Windows; U; Windows NT 10.0) http/2.8.12 Tcl/8.6.8\fR" . A safe interpreter cannot determine its operating system, and so the default in a safe interpreter is to use a Windows 10 value with the current version numbers of \fBhttp\fR and \fBTcl\fR. .TP \fB\-zip\fR \fIboolean\fR . If the value is boolean \fBtrue\fR, then by default requests will send a header .QW "\fBAccept-Encoding: gzip,deflate,compress\fR" . If the value is boolean \fBfalse\fR, then by default this header will not be sent. In either case the default can be overridden for an individual request by supplying a custom \fBAccept-Encoding\fR header in the \fB-headers\fR option of \fBhttp::geturl\fR. The default is 1. .RE .TP \fB::http::geturl\fR \fIurl\fR ?\fIoptions\fR? . The \fB::http::geturl\fR command is the main procedure in the package. The \fB\-query\fR option causes a POST operation and the \fB\-validate\fR option causes a HEAD operation; otherwise, a GET operation is performed. The \fB::http::geturl\fR command returns a \fItoken\fR value that can be used to get information about the transaction. See the \fBSTATE ARRAY\fR and \fBERRORS\fR section for details. The \fB::http::geturl\fR command blocks until the operation completes, unless the \fB\-command\fR option specifies a callback that is invoked when the HTTP transaction completes. \fB::http::geturl\fR takes several options: .RS .TP \fB\-binary\fR \fIboolean\fR . Specifies whether to force interpreting the URL data as binary. Normally this is auto-detected (anything not beginning with a \fBtext\fR content type or whose content encoding is \fBgzip\fR or \fBcompress\fR is considered binary data). .TP \fB\-blocksize\fR \fIsize\fR . The block size used when reading the URL. At most \fIsize\fR bytes are read at once. After each block, a call to the \fB\-progress\fR callback is made (if that option is specified). .TP \fB\-channel\fR \fIname\fR . Copy the URL contents to channel \fIname\fR instead of saving it in \fBstate(body)\fR. .TP \fB\-command\fR \fIcallback\fR . Invoke \fIcallback\fR after the HTTP transaction completes. This option causes \fB::http::geturl\fR to return immediately. The \fIcallback\fR gets an additional argument that is the \fItoken\fR returned from \fB::http::geturl\fR. This token is the name of an array that is described in the \fBSTATE ARRAY\fR section. Here is a template for the callback: .RS .PP .CS proc httpCallback {token} { upvar #0 $token state # Access state as a Tcl array } .CE .RE .TP \fB\-handler\fR \fIcallback\fR . Invoke \fIcallback\fR whenever HTTP data is available; if present, nothing else will be done with the HTTP data. This procedure gets two additional arguments: the socket for the HTTP data and the \fItoken\fR returned from \fB::http::geturl\fR. The token is the name of a global array that is described in the \fBSTATE ARRAY\fR section. The procedure is expected to return the number of bytes read from the socket. Here is a template for the callback: .RS .PP .CS proc httpHandlerCallback {socket token} { upvar #0 $token state # Access socket, and state as a Tcl array # For example... ... set data [read $socket 1000] set nbytes [string length $data] ... return $nbytes } .CE .RE .TP \fB\-headers\fR \fIkeyvaluelist\fR . This option is used to add headers not already specified by \fB::http::config\fR to the HTTP request. The \fIkeyvaluelist\fR argument must be a list with an even number of elements that alternate between keys and values. The keys become header field names. Newlines are stripped from the values so the header cannot be corrupted. For example, if \fIkeyvaluelist\fR is \fBPragma no-cache\fR then the following header is included in the HTTP request: .RS .PP .CS Pragma: no-cache .CE .RE .TP \fB\-keepalive\fR \fIboolean\fR . If boolean \fBtrue\fR, attempt to keep the connection open for servicing multiple requests. Default is 0. .TP \fB\-method\fR \fItype\fR . Force the HTTP request method to \fItype\fR. \fB::http::geturl\fR will auto-select GET, POST or HEAD based on other options, but this option enables choices like PUT and DELETE for webdav support. .TP \fB\-myaddr\fR \fIaddress\fR . Pass an specific local address to the underlying \fBsocket\fR call in case multiple interfaces are available. .TP \fB\-progress\fR \fIcallback\fR . The \fIcallback\fR is made after each transfer of data from the URL. The callback gets three additional arguments: the \fItoken\fR from \fB::http::geturl\fR, the expected total size of the contents from the \fBContent-Length\fR meta-data, and the current number of bytes transferred so far. The expected total size may be unknown, in which case zero is passed to the callback. Here is a template for the progress callback: .RS .PP .CS proc httpProgress {token total current} { upvar #0 $token state } .CE .RE .TP \fB\-protocol\fR \fIversion\fR . Select the HTTP protocol version to use. This should be 1.0 or 1.1 (the default). Should only be necessary for servers that do not understand or otherwise complain about HTTP/1.1. .TP \fB\-query\fR \fIquery\fR . This flag causes \fB::http::geturl\fR to do a POST request that passes the \fIquery\fR to the server. The \fIquery\fR must be an x-url-encoding formatted query. The \fB::http::formatQuery\fR procedure can be used to do the formatting. .TP \fB\-queryblocksize\fR \fIsize\fR . The block size used when posting query data to the URL. At most \fIsize\fR bytes are written at once. After each block, a call to the \fB\-queryprogress\fR callback is made (if that option is specified). .TP \fB\-querychannel\fR \fIchannelID\fR . This flag causes \fB::http::geturl\fR to do a POST request that passes the data contained in \fIchannelID\fR to the server. The data contained in \fIchannelID\fR must be an x-url-encoding formatted query unless the \fB\-type\fR option below is used. If a Content-Length header is not specified via the \fB\-headers\fR options, \fB::http::geturl\fR attempts to determine the size of the post data in order to create that header. If it is unable to determine the size, it returns an error. .TP \fB\-queryprogress\fR \fIcallback\fR . The \fIcallback\fR is made after each transfer of data to the URL (i.e. POST) and acts exactly like the \fB\-progress\fR option (the callback format is the same). .TP \fB\-strict\fR \fIboolean\fR . Whether to enforce RFC 3986 URL validation on the request. Default is 1. .TP \fB\-timeout\fR \fImilliseconds\fR . If \fImilliseconds\fR is non-zero, then \fB::http::geturl\fR sets up a timeout to occur after the specified number of milliseconds. A timeout results in a call to \fB::http::reset\fR and to the \fB\-command\fR callback, if specified. The return value of \fB::http::status\fR is \fBtimeout\fR after a timeout has occurred. .TP \fB\-type\fR \fImime-type\fR . Use \fImime-type\fR as the \fBContent-Type\fR value, instead of the default value (\fBapplication/x-www-form-urlencoded\fR) during a POST operation. .TP \fB\-validate\fR \fIboolean\fR . If \fIboolean\fR is non-zero, then \fB::http::geturl\fR does an HTTP HEAD request. This request returns meta information about the URL, but the contents are not returned. The meta information is available in the \fBstate(meta) \fR variable after the transaction. See the \fBSTATE ARRAY\fR section for details. .RE .TP \fB::http::formatQuery\fR \fIkey value\fR ?\fIkey value\fR ...? . This procedure does x-url-encoding of query data. It takes an even number of arguments that are the keys and values of the query. It encodes the keys and values, and generates one string that has the proper & and = separators. The result is suitable for the \fB\-query\fR value passed to \fB::http::geturl\fR. .TP \fB::http::quoteString\fR \fIvalue\fR . This procedure does x-url-encoding of string. It takes a single argument and encodes it. .TP \fB::http::reset\fR \fItoken\fR ?\fIwhy\fR? . This command resets the HTTP transaction identified by \fItoken\fR, if any. This sets the \fBstate(status)\fR value to \fIwhy\fR, which defaults to \fBreset\fR, and then calls the registered \fB\-command\fR callback. .TP \fB::http::wait\fR \fItoken\fR . This is a convenience procedure that blocks and waits for the transaction to complete. This only works in trusted code because it uses \fBvwait\fR. Also, it is not useful for the case where \fB::http::geturl\fR is called \fIwithout\fR the \fB\-command\fR option because in this case the \fB::http::geturl\fR call does not return until the HTTP transaction is complete, and thus there is nothing to wait for. .TP \fB::http::data\fR \fItoken\fR . This is a convenience procedure that returns the \fBbody\fR element (i.e., the URL data) of the state array. .TP \fB::http::error\fR \fItoken\fR . This is a convenience procedure that returns the \fBerror\fR element of the state array. .TP \fB::http::status\fR \fItoken\fR . This is a convenience procedure that returns the \fBstatus\fR element of the state array. .TP \fB::http::code\fR \fItoken\fR . This is a convenience procedure that returns the \fBhttp\fR element of the state array. .TP \fB::http::ncode\fR \fItoken\fR . This is a convenience procedure that returns just the numeric return code (200, 404, etc.) from the \fBhttp\fR element of the state array. .TP \fB::http::size\fR \fItoken\fR . This is a convenience procedure that returns the \fBcurrentsize\fR element of the state array, which represents the number of bytes received from the URL in the \fB::http::geturl\fR call. .TP \fB::http::meta\fR \fItoken\fR . This is a convenience procedure that returns the \fBmeta\fR element of the state array which contains the HTTP response headers. See below for an explanation of this element. .TP \fB::http::cleanup\fR \fItoken\fR . This procedure cleans up the state associated with the connection identified by \fItoken\fR. After this call, the procedures like \fB::http::data\fR cannot be used to get information about the operation. It is \fIstrongly\fR recommended that you call this function after you are done with a given HTTP request. Not doing so will result in memory not being freed, and if your app calls \fB::http::geturl\fR enough times, the memory leak could cause a performance hit...or worse. .TP \fB::http::register\fR \fIproto port command\fR . This procedure allows one to provide custom HTTP transport types such as HTTPS, by registering a prefix, the default port, and the command to execute to create the Tcl \fBchannel\fR. E.g.: .RS .PP .CS package require http package require tls ::http::register https 443 ::tls::socket set token [::http::geturl https://my.secure.site/] .CE .RE .TP \fB::http::registerError\fR \fIport\fR ?\fImessage\fR? . This procedure allows a registered protocol handler to deliver an error message for use by \fBhttp\fR. Calling this command does not raise an error. The command is useful when a registered protocol detects an problem (for example, an invalid TLS certificate) that will cause an error to propagate to \fBhttp\fR. The command allows \fBhttp\fR to provide a precise error message rather than a general one. The command returns the value provided by the last call with argument \fImessage\fR, or the empty string if no such call has been made. .TP \fB::http::unregister\fR \fIproto\fR . This procedure unregisters a protocol handler that was previously registered via \fB::http::register\fR, returning a two-item list of the default port and handler command that was previously installed (via \fB::http::register\fR) if there was such a handler, and an error if there was no such handler. .SH ERRORS The \fB::http::geturl\fR procedure will raise errors in the following cases: invalid command line options, an invalid URL, a URL on a non-existent host, or a URL at a bad port on an existing host. These errors mean that it cannot even start the network transaction. It will also raise an error if it gets an I/O error while writing out the HTTP request header. For synchronous \fB::http::geturl\fR calls (where \fB\-command\fR is not specified), it will raise an error if it gets an I/O error while reading the HTTP reply headers or data. Because \fB::http::geturl\fR does not return a token in these cases, it does all the required cleanup and there is no issue of your app having to call \fB::http::cleanup\fR. .PP For asynchronous \fB::http::geturl\fR calls, all of the above error situations apply, except that if there is any error while reading the HTTP reply headers or data, no exception is thrown. This is because after writing the HTTP headers, \fB::http::geturl\fR returns, and the rest of the HTTP transaction occurs in the background. The command callback can check if any error occurred during the read by calling \fB::http::status\fR to check the status and if its \fIerror\fR, calling \fB::http::error\fR to get the error message. .PP Alternatively, if the main program flow reaches a point where it needs to know the result of the asynchronous HTTP request, it can call \fB::http::wait\fR and then check status and error, just as the callback does. .PP In any case, you must still call \fB::http::cleanup\fR to delete the state array when you are done. .PP There are other possible results of the HTTP transaction determined by examining the status from \fB::http::status\fR. These are described below. .TP \fBok\fR . If the HTTP transaction completes entirely, then status will be \fBok\fR. However, you should still check the \fB::http::code\fR value to get the HTTP status. The \fB::http::ncode\fR procedure provides just the numeric error (e.g., 200, 404 or 500) while the \fB::http::code\fR procedure returns a value like .QW "HTTP 404 File not found" . .TP \fBeof\fR . If the server closes the socket without replying, then no error is raised, but the status of the transaction will be \fBeof\fR. .TP \fBerror\fR . The error message will also be stored in the \fBerror\fR status array element, accessible via \fB::http::error\fR. .PP Another error possibility is that \fB::http::geturl\fR is unable to write all the post query data to the server before the server responds and closes the socket. The error message is saved in the \fBposterror\fR status array element and then \fB::http::geturl\fR attempts to complete the transaction. If it can read the server's response it will end up with an \fBok\fR status, otherwise it will have an \fBeof\fR status. .SH "STATE ARRAY" The \fB::http::geturl\fR procedure returns a \fItoken\fR that can be used to get to the state of the HTTP transaction in the form of a Tcl array. Use this construct to create an easy-to-use array variable: .PP .CS upvar #0 $token state .CE .PP Once the data associated with the URL is no longer needed, the state array should be unset to free up storage. The \fB::http::cleanup\fR procedure is provided for that purpose. The following elements of the array are supported: .RS .TP \fBbinary\fR . This is boolean \fBtrue\fR if (after decoding any compression specified by the .QW "Content-Encoding" response header) the HTTP response is binary. It is boolean \fBfalse\fR if the HTTP response is text. .TP \fBbody\fR . The contents of the URL. This will be empty if the \fB\-channel\fR option has been specified. This value is returned by the \fB::http::data\fR command. .TP \fBcharset\fR . The value of the charset attribute from the \fBContent-Type\fR meta-data value. If none was specified, this defaults to the RFC standard \fBiso8859-1\fR, or the value of \fB$::http::defaultCharset\fR. Incoming text data will be automatically converted from this charset to utf-8. .TP \fBcoding\fR . A copy of the \fBContent-Encoding\fR meta-data value. .TP \fBcurrentsize\fR . The current number of bytes fetched from the URL. This value is returned by the \fB::http::size\fR command. .TP \fBerror\fR . If defined, this is the error string seen when the HTTP transaction was aborted. .TP \fBhttp\fR . The HTTP status reply from the server. This value is returned by the \fB::http::code\fR command. The format of this value is: .RS .PP .CS \fIHTTP/1.1 code string\fR .CE .PP The \fIcode\fR is a three-digit number defined in the HTTP standard. A code of 200 is OK. Codes beginning with 4 or 5 indicate errors. Codes beginning with 3 are redirection errors. In this case the \fBLocation\fR meta-data specifies a new URL that contains the requested information. .RE .TP \fBmeta\fR . The HTTP protocol returns meta-data that describes the URL contents. The \fBmeta\fR element of the state array is a list of the keys and values of the meta-data. This is in a format useful for initializing an array that just contains the meta-data: .RS .PP .CS array set meta $state(meta) .CE .PP Some of the meta-data keys are listed below, but the HTTP standard defines more, and servers are free to add their own. .TP \fBContent-Type\fR . The type of the URL contents. Examples include \fBtext/html\fR, \fBimage/gif,\fR \fBapplication/postscript\fR and \fBapplication/x-tcl\fR. .TP \fBContent-Length\fR . The advertised size of the contents. The actual size obtained by \fB::http::geturl\fR is available as \fBstate(currentsize)\fR. .TP \fBLocation\fR . An alternate URL that contains the requested data. .RE .TP \fBposterror\fR . The error, if any, that occurred while writing the post query data to the server. .TP \fBstatus\fR . Either \fBok\fR, for successful completion, \fBreset\fR for user-reset, \fBtimeout\fR if a timeout occurred before the transaction could complete, or \fBerror\fR for an error condition. During the transaction this value is the empty string. .TP \fBtotalsize\fR . A copy of the \fBContent-Length\fR meta-data value. .TP \fBtype\fR . A copy of the \fBContent-Type\fR meta-data value. .TP \fBurl\fR . The requested URL. .RE .SH "PERSISTENT CONNECTIONS" .PP .SS "BASICS" .PP See RFC 7230 Sec 6, which supersedes RFC 2616 Sec 8.1. .PP A persistent connection allows multiple HTTP/1.1 transactions to be carried over the same TCP connection. Pipelining allows a client to make multiple requests over a persistent connection without waiting for each response. The server sends responses in the same order that the requests were received. .PP If a POST request fails to complete, typically user confirmation is needed before sending the request again. The user may wish to verify whether the server was modified by the failed POST request, before sending the same request again. .PP A HTTP request will use a persistent socket if the call to \fBhttp::geturl\fR has the option \fB-keepalive true\fR. It will use pipelining where permitted if the \fBhttp::config\fR option \fB-pipeline\fR is boolean \fBtrue\fR (its default value). .PP The http package maintains no more than one persistent connection to each server (i.e. each value of .QW "domain:port" ). If \fBhttp::geturl\fR is called to make a request over a persistent connection while the connection is busy with another request, the new request will be held in a queue until the connection is free. .PP The http package does not support HTTP/1.0 persistent connections controlled by the \fBKeep-Alive\fR header. .SS "SPECIAL CASES" .PP This subsection discusses issues related to closure of the persistent connection by the server, automatic retry of failed requests, the special treatment necessary for POST requests, and the options for dealing with these cases. .PP In accordance with RFC 7230, \fBhttp::geturl\fR does not pipeline requests that use the POST method. If a POST uses a persistent connection and is not the first request on that connection, \fBhttp::geturl\fR waits until it has received the response for the previous request; or (if \fBhttp::config\fR option \fB-postfresh\fR is boolean \fBtrue\fR) it uses a new connection for each POST. .PP If the server is processing a number of pipelined requests, and sends a response header .QW "\fBConnection: close\fR" with one of the responses (other than the last), then subsequent responses are unfulfilled. \fBhttp::geturl\fR will send the unfulfilled requests again over a new connection. .PP A difficulty arises when a HTTP client sends a request over a persistent connection that has been idle for a while. The HTTP server may half-close an apparently idle connection while the client is sending a request, but before the request arrives at the server: in this case (an .QW "asynchronous close event" ) the request will fail. The difficulty arises because the client cannot be certain whether the POST modified the state of the server. For HEAD or GET requests, \fBhttp::geturl\fR opens another connection and retransmits the failed request. However, if the request was a POST, RFC 7230 forbids automatic retry by default, suggesting either user confirmation, or confirmation by user-agent software that has semantic understanding of the application. The \fBhttp::config\fR option \fB-repost\fR allows for either possibility. .PP Asynchronous close events can occur only in a short interval of time. The \fBhttp\fR package monitors each persistent connection for closure by the server. Upon detection, the connection is also closed at the client end, and subsequent requests will use a fresh connection. .PP If the \fBhttp::geturl\fR command is called with option \fB-keepalive true\fR, then it will both try to use an existing persistent connection (if one is available), and it will send the server a .QW "\fBConnection: keep-alive\fR" request header asking to keep the connection open for future requests. .PP The \fBhttp::config\fR options \fB-pipeline\fR, \fB-postfresh\fR, and \fB-repost\fR relate to persistent connections. .PP Option \fB-pipeline\fR, if boolean \fBtrue\fR, will pipeline GET and HEAD requests made over a persistent connection. POST requests will not be pipelined - if the POST is not the first transaction on the connection, its request will not be sent until the previous response has finished. GET and HEAD requests made after a POST will not be sent until the POST response has been delivered, and will not be sent if the POST fails. .PP Option \fB-postfresh\fR, if boolean \fBtrue\fR, will override the \fBhttp::geturl\fR option \fB-keepalive\fR, and always open a fresh connection for a POST request. .PP Option \fB-repost\fR, if \fBtrue\fR, permits automatic retry of a POST request that fails because it uses a persistent connection that the server has half-closed (an .QW "asynchronous close event" ). Subsequent GET and HEAD requests in a failed pipeline will also be retried. \fIThe -repost option should be used only if the application understands that the retry is appropriate\fR - specifically, the application must know that if the failed POST successfully modified the state of the server, a repeat POST would have no adverse effect. .SH EXAMPLE .PP This example creates a procedure to copy a URL to a file while printing a progress meter, and prints the meta-data associated with the URL. .PP .CS proc httpcopy { url file {chunk 4096} } { set out [open $file w] set token [\fB::http::geturl\fR $url -channel $out \e -progress httpCopyProgress -blocksize $chunk] close $out # This ends the line started by httpCopyProgress puts stderr "" upvar #0 $token state set max 0 foreach {name value} $state(meta) { if {[string length $name] > $max} { set max [string length $name] } if {[regexp -nocase ^location$ $name]} { # Handle URL redirects puts stderr "Location:$value" return [httpcopy [string trim $value] $file $chunk] } } incr max foreach {name value} $state(meta) { puts [format "%-*s %s" $max $name: $value] } return $token } proc httpCopyProgress {args} { puts -nonewline stderr . flush stderr } .CE .SH "SEE ALSO" safe(3tcl), socket(3tcl), safesock(3tcl) .SH KEYWORDS internet, security policy, socket, www '\" Local Variables: '\" mode: nroff '\" End: