'\"
'\" Copyright (c) 1993 The Regents of the University of California.
'\" Copyright (c) 1994-1997 Sun Microsystems, Inc.
'\"
'\" See the file "license.terms" for information on usage and redistribution
'\" of this file, and for a DISCLAIMER OF ALL WARRANTIES.
'\"
.TH tclvars 3tcl 8.0 Tcl "Tcl Built-In Commands"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
'\" Note:  do not modify the .SH NAME line immediately below!
.SH NAME
argc, argv, argv0, auto_path, env, errorCode, errorInfo, tcl_interactive, tcl_library, tcl_nonwordchars, tcl_patchLevel, tcl_pkgPath, tcl_platform, tcl_precision, tcl_rcFileName, tcl_traceCompile, tcl_traceExec, tcl_wordchars, tcl_version \- Variables used by Tcl
.BE
.SH DESCRIPTION
.PP
The following global variables are created and managed automatically
by the Tcl library.  Except where noted below, these variables should
normally be treated as read-only by application-specific code and by users.
.TP
\fBauto_path\fR
.
If set, then it must contain a valid Tcl list giving directories to
search during auto-load operations (including for package index
files when using the default \fBpackage unknown\fR handler).
This variable is initialized during startup to contain, in order:
the directories listed in the \fBTCLLIBPATH\fR environment variable,
the directory named by the \fBtcl_library\fR global variable,
the parent directory of \fBtcl_library\fR,
the directories listed in the \fBtcl_pkgPath\fR variable.
Additional locations to look for files and package indices should
normally be added to this variable using \fBlappend\fR.
.RS
.PP
Additional variables relating to package management exist. More
details are listed in the \fBVARIABLES\fR section of the \fBlibrary\fR
manual page.
.RE
.TP
\fBenv\fR
.
This variable is maintained by Tcl as an array
whose elements are the environment variables for the process.
Reading an element will return the value of the corresponding
environment variable.
Setting an element of the array will modify the corresponding
environment variable or create a new one if it does not already
exist.
Unsetting an element of \fBenv\fR will remove the corresponding
environment variable.
Changes to the \fBenv\fR array will affect the environment
passed to children by commands like \fBexec\fR.
If the entire \fBenv\fR array is unset then Tcl will stop
monitoring \fBenv\fR accesses and will not update environment
variables.
.RS
.PP
Under Windows, the environment variables PATH and COMSPEC in any
capitalization are converted automatically to upper case.  For instance, the
PATH variable could be exported by the operating system as
.QW path ,
.QW Path ,
.QW PaTh ,
etc., causing otherwise simple Tcl code to have to
support many special cases.  All other environment variables inherited by
Tcl are left unmodified.  Setting an env array variable to blank is the
same as unsetting it as this is the behavior of the underlying Windows OS.
It should be noted that relying on an existing and empty environment variable
will not work on Windows and is discouraged for cross-platform usage.
.PP
The following elements of \fBenv\fR are special to Tcl:
.TP
\fBenv(HOME)\fR
.
This environment variable, if set, gives the location of the directory
considered to be the current user's home directory, and to which a
call of \fBcd\fR without arguments or with just
.QW ~
as an argument will change into. Most platforms set this correctly by
default; it does not normally need to be set by user code.
.TP
\fBenv(TCL_LIBRARY)\fR
.
If set, then it specifies the location of the directory containing
library scripts (the value of this variable will be
assigned to the \fBtcl_library\fR variable and therefore returned by
the command \fBinfo library\fR).  If this variable is not set then
a default value is used.
.RS
.PP
Note that this environment variable should \fInot\fR normally be set.
.RE
.TP
\fBenv(TCLLIBPATH)\fR
.
If set, then it must contain a valid Tcl list giving directories to
search during auto-load operations.  Directories must be specified in
Tcl format, using
.QW /
as the path separator, regardless of platform.
This variable is only used when initializing the \fBauto_path\fR variable.
.TP
\fBenv(TCL_TZ)\fR, \fBenv(TZ)\fR
.
These specify the default timezone used for parsing and formatting times and
dates in the \fBclock\fR command. On many platforms, the TZ environment
variable is set up by the operating system.
.TP
\fBenv(LC_ALL)\fR, \fBenv(LC_MESSAGES)\fR, \fBenv(LANG)\fR
.
These environment variables are used by the \fBmsgcat\fR package to
determine what locale to format messages using.
.TP
\fBenv(TCL_INTERP_DEBUG_FRAME)\fR
.
If existing, it has the same effect as running \fBinterp debug\fR
\fB{} -frame 1\fR
as the very first command of each new Tcl interpreter.
.RE
.TP
\fBerrorCode\fR
.
This variable holds the value of the \fB\-errorcode\fR return option
set by the most recent error that occurred in this interpreter.
This list value represents additional information about the error
in a form that is easy to process with programs.
The first element of the list identifies a general class of
errors, and determines the format of the rest of the list.
The following formats for \fB\-errorcode\fR return options
are used by the Tcl core; individual applications may define
additional formats.
.RS
.TP
\fBARITH\fI code msg\fR
.
This format is used when an arithmetic error occurs (e.g. an attempt
to divide zero by zero in the \fBexpr\fR command).
\fICode\fR identifies the precise error and \fImsg\fR provides a
human-readable description of the error.  \fICode\fR will be either
DIVZERO (for an attempt to divide by zero),
DOMAIN (if an argument is outside the domain of a function, such as acos(\-3)),
IOVERFLOW (for integer overflow),
OVERFLOW (for a floating-point overflow),
or UNKNOWN (if the cause of the error cannot be determined).
.RS
.PP
Detection of these errors depends in part on the underlying hardware
and system libraries.
.RE
.TP
\fBCHILDKILLED\fI pid sigName msg\fR
.
This format is used when a child process has been killed because of
a signal.  The \fIpid\fR element will be the process's identifier (in decimal).
The \fIsigName\fR element will be the symbolic name of the signal that caused
the process to terminate; it will be one of the names from the
include file signal.h, such as \fBSIGPIPE\fR.
The \fImsg\fR element will be a short human-readable message
describing the signal, such as
.QW "write on pipe with no readers"
for \fBSIGPIPE\fR.
.TP
\fBCHILDSTATUS\fI pid code\fR
.
This format is used when a child process has exited with a non-zero
exit status.  The \fIpid\fR element will be the
process's identifier (in decimal) and the \fIcode\fR element will be the exit
code returned by the process (also in decimal).
.TP
\fBCHILDSUSP\fI pid sigName msg\fR
.
This format is used when a child process has been suspended because
of a signal.
The \fIpid\fR element will be the process's identifier, in decimal.
The \fIsigName\fR element will be the symbolic name of the signal that caused
the process to suspend; this will be one of the names from the
include file signal.h, such as \fBSIGTTIN\fR.
The \fImsg\fR element will be a short human-readable message
describing the signal, such as
.QW "background tty read"
for \fBSIGTTIN\fR.
.TP
\fBNONE\fR
.
This format is used for errors where no additional information is
available for an error besides the message returned with the
error.  In these cases the \fB\-errorcode\fR return option
will consist of a list containing a single element whose
contents are \fBNONE\fR.
.TP
\fBPOSIX \fIerrName msg\fR
.
If the first element is \fBPOSIX\fR, then
the error occurred during a POSIX kernel call.
The \fIerrName\fR element will contain the symbolic name
of the error that occurred, such as \fBENOENT\fR; this will
be one of the values defined in the include file errno.h.
The \fImsg\fR element will be a human-readable
message corresponding to \fIerrName\fR, such as
.QW "no such file or directory"
for the \fBENOENT\fR case.
.TP
\fBTCL\fR ...
.
Indicates some sort of problem generated in relation to Tcl itself, e.g. a
failure to look up a channel or variable.
.PP
To set the \fB\-errorcode\fR return option, applications should use library
procedures such as \fBTcl_SetObjErrorCode\fR, \fBTcl_SetReturnOptions\fR,
and \fBTcl_PosixError\fR, or they may invoke the \fB\-errorcode\fR
option of the \fBreturn\fR command.
If none of these methods for setting the error code has been used,
the Tcl interpreter will reset the variable to \fBNONE\fR after
the next error.
.RE
.TP
\fBerrorInfo\fR
.
This variable holds the value of the \fB\-errorinfo\fR return option
set by the most recent error that occurred in this interpreter.
This string value will contain one or more lines
identifying the Tcl commands and procedures that were being executed
when the most recent error occurred.
Its contents take the form of a stack trace showing the various
nested Tcl commands that had been invoked at the time of the error.
.TP
\fBtcl_library\fR
.
This variable holds the name of a directory containing the
system library of Tcl scripts, such as those used for auto-loading.
The value of this variable is returned by the \fBinfo library\fR command.
See the \fBlibrary\fR manual entry for details of the facilities
provided by the Tcl script library.
Normally each application or package will have its own application-specific
script library in addition to the Tcl script library;
each application should set a global variable with a name like
\fB$\fIapp\fB_library\fR (where \fIapp\fR is the application's name)
to hold the network file name for that application's library directory.
The initial value of \fBtcl_library\fR is set when an interpreter
is created by searching several different directories until one is
found that contains an appropriate Tcl startup script.
If the \fBTCL_LIBRARY\fR environment variable exists, then
the directory it names is checked first.
If \fBTCL_LIBRARY\fR is not set or doesn't refer to an appropriate
directory, then Tcl checks several other directories based on a
compiled-in default location, the location of the binary containing
the application, and the current working directory.
.TP
\fBtcl_patchLevel\fR
.
When an interpreter is created Tcl initializes this variable to
hold a string giving the current patch level for Tcl, such as
\fB8.4.16\fR for Tcl 8.4 with the first sixteen official patches, or
\fB8.5b3\fR for the third beta release of Tcl 8.5.
The value of this variable is returned by the \fBinfo patchlevel\fR
command.
.TP
\fBtcl_pkgPath\fR
.
This variable holds a list of directories indicating where packages are
normally installed.  It is not used on Windows.  It typically contains
either one or two entries; if it contains two entries, the first is
normally a directory for platform-dependent packages (e.g., shared library
binaries) and the second is normally a directory for platform-independent
packages (e.g., script files). Typically a package is installed as a
subdirectory of one of the entries in the \fBtcl_pkgPath\fR
variable. The directories in the \fBtcl_pkgPath\fR variable are
included by default in the \fBauto_path\fR
variable, so they and their immediate subdirectories are automatically
searched for packages during \fBpackage require\fR commands.  Note:
\fBtcl_pkgPath\fR is not intended to be modified by the application.  Its
value is added to \fBauto_path\fR at startup; changes to \fBtcl_pkgPath\fR
are not reflected in \fBauto_path\fR.  If you want Tcl to search additional
directories for packages you should add the names of those directories to
\fBauto_path\fR, not \fBtcl_pkgPath\fR.
.TP
\fBtcl_platform\fR
.
This is an associative array whose elements contain information about
the platform on which the application is running, such as the name of
the operating system, its current release number, and the machine's
instruction set.  The elements listed below will always
be defined, but they may have empty strings as values if Tcl could not
retrieve any relevant information.  In addition, extensions
and applications may add additional values to the array.  The
predefined elements are:
.RS
.TP
\fBbyteOrder\fR
.
The native byte order of this machine: either \fBlittleEndian\fR or
\fBbigEndian\fR.
.TP
\fBdebug\fR
.
If this variable exists, then the interpreter was compiled with and linked
to a debug-enabled C run-time.  This variable will only exist on Windows,
so extension writers can specify which package to load depending on the
C run-time library that is in use.  This is not an indication that this core
contains symbols.
.TP
\fBengine\fR
.
The name of the Tcl language implementation.  When the interpreter is first
created, this is always set to the string \fBTcl\fR.
.TP
\fBmachine\fR
.
The instruction set executed by this machine, such as
\fBintel\fR, \fBPPC\fR, \fB68k\fR, or \fBsun4m\fR.  On UNIX machines, this
is the value returned by \fBuname -m\fR.
.TP
\fBos\fR
.
The name of the operating system running on this machine,
such as \fBWindows NT\fR or \fBSunOS\fR.
On UNIX machines, this is the value returned by \fBuname -s\fR.
.TP
\fBosVersion\fR
.
The version number for the operating system running on this machine.
On UNIX machines, this is the value returned by \fBuname -r\fR.
.TP
\fBpathSeparator\fR
.VS 8.6
'\" Defined by TIP #315
The character that should be used to \fBsplit\fR PATH-like environment
variables into their corresponding list of directory names.
.VE 8.6
.TP
\fBplatform\fR
.
Either \fBwindows\fR, or \fBunix\fR.  This identifies the
general operating environment of the machine.
.TP
\fBpointerSize\fR
.
This gives the size of the native-machine pointer in bytes (strictly, it
is same as the result of evaluating \fIsizeof(void*)\fR in C.)
.TP
\fBthreaded\fR
.
If this variable exists, then the interpreter
was compiled with threads enabled.
.TP
\fBuser\fR
.
This identifies the
current user based on the login information available on the platform.
This value comes from the getuid() and getpwuid() system calls on Unix,
and the value from the GetUserName() system call on Windows.
.TP
\fBwordSize\fR
.
This gives the size of the native-machine word in bytes (strictly, it
is same as the result of evaluating \fIsizeof(long)\fR in C.)
.RE
.TP
\fBtcl_precision\fR
.
This variable controls the number of digits to generate
when converting floating-point values to strings.  It defaults
to 0.  \fIApplications should not change this value;\fR it is
provided for compatibility with legacy code.
.PP
.RS
The default value of 0 is special, meaning that Tcl should
convert numbers using as few digits as possible while still
distinguishing any floating point number from its nearest
neighbours.  It differs from using an arbitrarily high value
for \fItcl_precision\fR in that an inexact number like \fI1.4\fR
will convert as \fI1.4\fR rather than \fI1.3999999999999999\fR
even though the latter is nearer to the exact value of the
binary number.
.RE
.PP
.RS
If \fBtcl_precision\fR is not zero, then when Tcl converts a floating
point number, it creates a decimal representation of at most
\fBtcl_precision\fR significant digits; the result may be shorter if
the shorter result represents the original number exactly. If no
result of at most \fBtcl_precision\fR digits is an exact representation
of the original number, the one that is closest to the original
number is chosen.
If the original number lies precisely between two equally accurate
decimal representations, then the one with an even value for the least
significant digit is chosen; for instance, if \fBtcl_precision\fR is 3, then
0.3125 will convert to 0.312, not 0.313, while 0.6875 will convert to
0.688, not 0.687. Any string of trailing zeroes that remains is trimmed.
.RE
.PP
.RS
a \fBtcl_precision\fR value of 17 digits is
.QW perfect
for IEEE floating-point in that it allows
double-precision values to be converted to strings and back to
binary with no loss of information. For this reason, you will often
see it as a value in legacy code that must run on Tcl versions before
8.5. It is no longer recommended; as noted above, a zero value is the
preferred method.
.RE
.PP
.RS
All interpreters in a thread share a single \fBtcl_precision\fR value:
changing it in one interpreter will affect all other interpreters as
well.  Safe interpreters are not allowed to modify the
variable.
.RE
.PP
.RS
Valid values for \fBtcl_precision\fR range from 0 to 17.
.RE
.TP
\fBtcl_rcFileName\fR
.
This variable is used during initialization to indicate the name of a
user-specific startup file.  If it is set by application-specific
initialization, then the Tcl startup code will check for the existence
of this file and \fBsource\fR it if it exists.  For example, for \fBwish\fR
the variable is set to \fB~/.wishrc\fR for Unix and \fB~/wishrc.tcl\fR
for Windows.
.TP
\fBtcl_traceCompile\fR
.
The value of this variable can be set to control
how much tracing information
is displayed during bytecode compilation.
By default, \fBtcl_traceCompile\fR is zero and no information is displayed.
Setting \fBtcl_traceCompile\fR to 1 generates a one-line summary in \fBstdout\fR
whenever a procedure or top-level command is compiled.
Setting it to 2 generates a detailed listing in \fBstdout\fR of the
bytecode instructions emitted during every compilation.
This variable is useful in
tracking down suspected problems with the Tcl compiler.
.PP
.RS
This variable and functionality only exist if
\fBTCL_COMPILE_DEBUG\fR was defined during Tcl's compilation.
.RE
.TP
\fBtcl_traceExec\fR
.
The value of this variable can be set to control
how much tracing information
is displayed during bytecode execution.
By default, \fBtcl_traceExec\fR is zero and no information is displayed.
Setting \fBtcl_traceExec\fR to 1 generates a one-line trace in \fBstdout\fR
on each call to a Tcl procedure.
Setting it to 2 generates a line of output
whenever any Tcl command is invoked
that contains the name of the command and its arguments.
Setting it to 3 produces a detailed trace showing the result of
executing each bytecode instruction.
Note that when \fBtcl_traceExec\fR is 2 or 3,
commands such as \fBset\fR and \fBincr\fR
that have been entirely replaced by a sequence
of bytecode instructions are not shown.
Setting this variable is useful in
tracking down suspected problems with the bytecode compiler
and interpreter.
.PP
.RS
This variable and functionality only exist if
\fBTCL_COMPILE_DEBUG\fR was defined during Tcl's compilation.
.RE
.TP
\fBtcl_wordchars\fR
.
The value of this variable is a regular expression that can be set to
control what are considered
.QW word
characters, for instances like
selecting a word by double-clicking in text in Tk.  It is platform
dependent.  On Windows, it defaults to \fB\eS\fR, meaning anything
but a Unicode space character.  Otherwise it defaults to \fB\ew\fR,
which is any Unicode word character (number, letter, or underscore).
.TP
\fBtcl_nonwordchars\fR
.
The value of this variable is a regular expression that can be set to
control what are considered
.QW non-word
characters, for instances like
selecting a word by double-clicking in text in Tk.  It is platform
dependent.  On Windows, it defaults to \fB\es\fR, meaning any Unicode space
character.  Otherwise it defaults to \fB\eW\fR, which is anything but a
Unicode word character (number, letter, or underscore).
.TP
\fBtcl_version\fR
.
When an interpreter is created Tcl initializes this variable to
hold the version number for this version of Tcl in the form \fIx.y\fR.
Changes to \fIx\fR represent major changes with probable
incompatibilities and changes to \fIy\fR represent small enhancements and
bug fixes that retain backward compatibility.
The value of this variable is returned by the \fBinfo tclversion\fR
command.
.SH "OTHER GLOBAL VARIABLES"
.PP
The following variables are only guaranteed to exist in \fBtclsh\fR
and \fBwish\fR executables; the Tcl library does not define them
itself but many Tcl environments do.
.TP 6
\fBargc\fR
.
The number of arguments to \fBtclsh\fR or \fBwish\fR.
.TP 6
\fBargv\fR
.
Tcl list of arguments to \fBtclsh\fR or \fBwish\fR.
.TP 6
\fBargv0\fR
.
The script that \fBtclsh\fR or \fBwish\fR started executing (if it was
specified) or otherwise the name by which \fBtclsh\fR or \fBwish\fR
was invoked.
.TP 6
\fBtcl_interactive\fR
.
Contains 1 if \fBtclsh\fR or \fBwish\fR is running interactively (no
script was specified and standard input is a terminal-like device), 0
otherwise.
.SH EXAMPLES
.PP
To add a directory to the collection of locations searched by
\fBpackage require\fR, e.g., because of some application-specific
packages that are used, the \fBauto_path\fR variable needs to be
updated:
.PP
.CS
lappend ::\fBauto_path\fR [file join [pwd] "theLibDir"]
.CE
.PP
A simple though not very robust way to handle command line arguments
of the form
.QW "\-foo 1 \-bar 2"
is to load them into an array having first loaded in the default settings:
.CS
array set arguments {-foo 0 -bar 0 -grill 0}
array set arguments $::\fBargv\fR
puts "foo is $arguments(-foo)"
puts "bar is $arguments(-bar)"
puts "grill is $arguments(-grill)"
.CE
.PP
The \fBargv0\fR global variable can be used (in conjunction with the
\fBinfo script\fR command) to determine whether the current script is
being executed as the main script or loaded as a library.  This is
useful because it allows a single script to be used as both a library
and a demonstration of that library:
.PP
.CS
if {$::\fBargv0\fR eq [info script]} {
    # running as: tclsh example.tcl
} else {
    package provide Example 1.0
}
.CE
.SH "SEE ALSO"
eval(3tcl), library(3tcl), tclsh(1), tkvars(3tcl), wish(1)
.SH KEYWORDS
arithmetic, bytecode, compiler, error, environment, POSIX, precision,
subprocess, user, variables
'\" Local Variables:
'\" mode: nroff
'\" End: