.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.8.
.TH ECLIPSE "1" "February 2019" "Eclipse SUMO jtrrouter Version 1.1.0" "User Commands"
.SH NAME
Eclipse \- Router for the microscopic road traffic simulation SUMO based on junction turning ratios
.SH SYNOPSIS
.B jtrrouter
[\fI\,OPTION\/\fR]\fI\,*\/\fR
.SH DESCRIPTION
Eclipse SUMO jtrrouter Version 1.1.0
.IP
Copyright (C) 2001\-2018 German Aerospace Center (DLR) and others; http://sumo.dlr.de
.PP
Router for the microscopic, multi\-modal traffic simulation SUMO based on
.IP
junction turning ratios.
.SS "Configuration Options:"
.TP
\fB\-c\fR, \fB\-\-configuration\-file\fR FILE
Loads the named config on startup
.TP
\fB\-C\fR, \fB\-\-save\-configuration\fR FILE
Saves current configuration into FILE
.TP
\fB\-\-save\-template\fR FILE
Saves a configuration template (empty) into
FILE
.TP
\fB\-\-save\-schema\fR FILE
Saves the configuration schema into FILE
.TP
\fB\-\-save\-commented\fR
Adds comments to saved template,
configuration, or schema
.SS "Input Options:"
.TP
\fB\-n\fR, \fB\-\-net\-file\fR FILE
Use FILE as SUMO\-network to route on
.TP
\fB\-a\fR, \fB\-\-additional\-files\fR FILE
Read additional network data (districts, bus
stops) from FILE(s)
.TP
\fB\-r\fR, \fB\-\-route\-files\fR FILE
Read sumo routes, alternatives, flows, and
trips from FILE(s)
.TP
\fB\-t\fR, \fB\-\-turn\-ratio\-files\fR FILE
Read turning ratios from FILE(s)
.SS "Output Options:"
.TP
\fB\-\-write\-license\fR
Include license info into every output file
.TP
\fB\-\-output\-prefix\fR STR
Prefix which is applied to all output files.
The special string 'TIME' is replaced by
the current time.
.TP
\fB\-\-precision\fR INT
Defines the number of digits after the comma
for floating point output
.TP
\fB\-\-precision\fR.geo INT
Defines the number of digits after the comma
for lon,lat output
.TP
\fB\-H\fR, \fB\-\-human\-readable\-time\fR
Write time values as hour:minute:second or
day:hour:minute:second rathern than seconds
.TP
\fB\-o\fR, \fB\-\-output\-file\fR FILE
Write generated routes to FILE
.TP
\fB\-\-vtype\-output\fR FILE
Write used vehicle types into separate FILE
.TP
\fB\-\-keep\-vtype\-distributions\fR
Keep vTypeDistribution ids when writing
vehicles and their types
.TP
\fB\-\-exit\-times\fR
Write exit times (weights) for each edge
.SS "Processing Options:"
.TP
\fB\-\-unsorted\-input\fR
Assume input is unsorted
.TP
\fB\-s\fR, \fB\-\-route\-steps\fR TIME
Load routes for the next number of seconds
ahead
.TP
\fB\-\-no\-internal\-links\fR
Disable (junction) internal links
.TP
\fB\-\-randomize\-flows\fR
generate random departure times for flow
input
.TP
\fB\-\-max\-alternatives\fR INT
Prune the number of alternatives to INT
.TP
\fB\-\-remove\-loops\fR
Remove loops within the route;
Remove turnarounds at start and end of the
route
.TP
\fB\-\-repair\fR
Tries to correct a false route
.TP
\fB\-\-repair\fR.from
Tries to correct an invalid starting edge by
using the first usable edge instead
.TP
\fB\-\-repair\fR.to
Tries to correct an invalid destination edge
by using the last usable edge instead
.TP
\fB\-\-weights\fR.interpolate
Interpolate edge weights at interval
boundaries
.TP
\fB\-\-with\-taz\fR
Use origin and destination zones (districts)
for in\- and output
.TP
\fB\-\-bulk\-routing\fR
Aggregate routing queries with the same
origin
.TP
\fB\-\-routing\-threads\fR INT
The number of parallel execution threads
used for routing
.TP
\fB\-\-max\-edges\-factor\fR FLOAT
Routes are cut off when the route edges to
net edges ratio is larger than FLOAT
.TP
\fB\-T\fR, \fB\-\-turn\-defaults\fR STR
Use STR as default turn definition
.TP
\fB\-\-sink\-edges\fR STR
Use STR as list of sink edges
.TP
\fB\-A\fR, \fB\-\-accept\-all\-destinations\fR
Whether all edges are allowed as sink edges
.TP
\fB\-i\fR, \fB\-\-ignore\-vclasses\fR
Ignore road restrictions based on vehicle
class
.TP
\fB\-\-allow\-loops\fR
Allow to re\-use a road
.SS "Defaults Options:"
.TP
\fB\-\-departlane\fR STR
Assigns a default depart lane
.TP
\fB\-\-departpos\fR STR
Assigns a default depart position
.TP
\fB\-\-departspeed\fR STR
Assigns a default depart speed
.TP
\fB\-\-arrivallane\fR STR
Assigns a default arrival lane
.TP
\fB\-\-arrivalpos\fR STR
Assigns a default arrival position
.TP
\fB\-\-arrivalspeed\fR STR
Assigns a default arrival speed
.TP
\fB\-\-defaults\-override\fR
Defaults will override given values
.SS "Time Options:"
.TP
\fB\-b\fR, \fB\-\-begin\fR TIME
Defines the begin time;
Previous trips will be discarded
.TP
\fB\-e\fR, \fB\-\-end\fR TIME
Defines the end time;
Later trips will be discarded;
Defaults to the maximum time that SUMO can
represent
.SS "Report Options:"
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Switches to verbose output
.TP
\fB\-\-print\-options\fR
Prints option values before processing
.TP
\-?, \fB\-\-help\fR
Prints this screen
.TP
\fB\-V\fR, \fB\-\-version\fR
Prints the current version
.TP
\fB\-X\fR, \fB\-\-xml\-validation\fR STR
Set schema validation scheme of XML inputs
("never", "auto" or "always")
.TP
\fB\-\-xml\-validation\fR.net STR
Set schema validation scheme of SUMO network
inputs ("never", "auto" or "always")
.TP
\fB\-W\fR, \fB\-\-no\-warnings\fR
Disables output of warnings
.TP
\fB\-l\fR, \fB\-\-log\fR FILE
Writes all messages to FILE (implies
verbose)
.TP
\fB\-\-message\-log\fR FILE
Writes all non\-error messages to FILE
(implies verbose)
.TP
\fB\-\-error\-log\fR FILE
Writes all warnings and errors to FILE
.TP
\fB\-\-ignore\-errors\fR
Continue if a route could not be build
.TP
\fB\-\-stats\-period\fR INT
Defines how often statistics shall be
printed
.TP
\fB\-\-no\-step\-log\fR
Disable console output of route parsing step
.SS "Random Number Options:"
.TP
\fB\-\-random\fR
Initialises the random number generator with
the current system time
.TP
\fB\-\-seed\fR INT
Initialises the random number generator with
the given value
.SH EXAMPLES
.IP
jtrrouter \-c <CONFIGURATION>
.IP
run with routing options defined in file
.SH "REPORTING BUGS"
Report bugs at <https://github.com/eclipse/sumo/issues>.
.br
Get in contact via <sumo@dlr.de>.
.IP
.br
Build features: x86_64\-pc\-linux\-gnu PROJ GDAL GUI
.br
Copyright (C) 2001\-2018 German Aerospace Center (DLR) and others; http://sumo.dlr.de
.PP
.br
Eclipse SUMO jtrrouter Version 1.1.0 is part of SUMO.
.br
This program and the accompanying materials
are made available under the terms of the Eclipse Public License v2.0
which accompanies this distribution, and is available at
http://www.eclipse.org/legal/epl\-v20.html
.br
SPDX\-License\-Identifier: EPL\-2.0