| opasmaquery(1) | Master map: IFSFFCLIRG (Man Page) | opasmaquery(1) |
NAME¶
opasmaquery(All) Performs Intel(R) Omni-Path Architecture-defined SMA queries and displays the resulting response. Each query is issued directly to the SMA and does not involve SM interaction.
Syntax¶
opasmaquery [-v] [-d detail][-g] [-l lid] [-h hfi] [-p port] [-o otype][-m port| port1,port2] [-f flid] [-b block[,count]] [hop hop ...]
Options¶
- --help
- Produces full help text.
- -v
- Returns verbose output. Can be specified more than once for additional openib and libibumad debugging.
- -d detail
- Specifies the output detail level for cableinfo only. Range is 0 - n. Default is 2. An upper limit for detail level is not enforced. After a maximum amount of output is reached, a larger detail value has no effect.
- -g
- Displays line-by-line format. Default is summary format.
- -l lid
- Specifies the destination LID. Default is local port.
- -h/--hfi hfi
- Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a system-wide port number. Default is 0.
- -p/--port port
- Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.
- -o otype
- Specifies the output type. Default is nodeinfo. Refer to otype Options Vary by Report for supported options.
- Valid output types are:
bfrctrl Specifies buffer control tables.
- [-m dest_port] [-m port1,port2]
cableinfo Specifies cable information.
- [-d detail] [-m dest_port] [-b block[,count]]
conginfo Specifies congestion information.
desc or nodedesc Specifies node descriptions/names.
hficongcon Specifies HFI congestion control settings.
- [-b block[,count]] [-f flid]
hficonglog Specifies HFI congestion logs.
- [-b block[,count]]
hficongset Specifies HFI congestion settings.
linfdb Specifies switch linear forwarding database (FDB) tables.
- [-b block[,count]] [-f flid]
mcfdb Specifies switch multicast FDB tables.
- [-m dest_port] [-b block[,count]] [-f flid]
portgroup Specifies Adaptive Routing port groups.
- [-b block[,count]]
portgroupfdb Specifies Adaptive Routing port group FWD tables.
- [-b block[,count]] [-f flid]
nodeaggr Specifies node information and node descriptions.
node or nodeinfo Specifies node information.
- [-m dest_port]
portinfo Specifies port information.
- [-m dest_port]
pstateinfo Specifies switch port state information.
- [-m dest_port] [-m port1,port2]
pkey Specifies P-Key tables.
- [-m dest_port] [-b block[,count]]
slsc Specifies SL to SC mapping tables.
scsl Specifies SC to SL mapping tables.
scsc Specifies SC to SC mapping tables.
- [-m dest_port] [-m port1,port2]
scvlt Specifies SC to VLt tables.
- [-m dest_port] [-m port1,port2]
scvlnt Specifies SC to VLnt tables.
- [-m dest_port] [-m port1,port2]
scvlr Specifies SC to VLr tables
- [-m dest_port] [-m port1,port2]
sminfo Specifies SM information.
swaggr Specifies node information and switch information.
swconglog Specifies switch congestion logs.
- [-b block[,count]]
swcongset Specifies switch congestion settings.
swinfo Specifies switch information.
swportcong Specifies switch congestion settings.
- [-b block[,count]]
vlarb Specifies VL arbitration tables.
- [-m dest_port]
ibnodeinfo Specifies IB node information.
ledinfo Specifies LED information.
- [-m dest_port]
-h and -p options permit a variety of selections:¶
- -h 0
- First active port in system (Default).
- -h 0 -p 0
- First active port in system.
- -h x
- First active port on HFI x.
- -h x -p 0
- First active port on HFI x.
- -h 0 -p y
- Port y within system (no matter which ports are active).
- -h x -p y
- HFI x, port y.
otype Options Vary by Report¶
[-m port|port1,port2] [-f lid] [-b block[,count]]- -m port
- Specifies the port in destination device to query.
- -m port1,port2
- For some reports, specifies a range of ports between port1 and port2. For others, this describes an inport/outport pair.
- -f lid
- Specifies the LID to look up in forwarding table to select which LFT or MFT block to display. Default is to show entire table.
- -b block[,count]
- Specifies the block number of either GUIDs or pkey, and the number of blocks to display. Default is to show entire table.
- For example:
-b block Displays all of block block of a larger table.
-b block,count Displays count blocks of data starting with block block.
-b, count Displays count blocks of data starting with block 0.
Examples¶
opasmaquery -o desc -l 6# get nodedesc via lid routed
opasmaquery -o nodedesc 1 3
# get nodedesc via directed route (2 dr hops)
opasmaquery -o nodeinfo -l 2 3
# get nodeinfo via a combination of lid routed and # directed route (1 dr
hop)
opasmaquery -o portinfo
# get local port info
opasmaquery -o portinfo -l 6 -m 1
# get port info of port 1 of lid 6
opasmaquery -o pkey -l 2 3
# get pkey table entries starting (lid routed to lid 2,
# then 1 dr hop to port 3)
opasmaquery -o vlarb -l 6
# get vlarb table entries from lid 6
opasmaquery -o swinfo -l 2
# get switch info
opasmaquery -o sminfo -l 1
# get SM info
opasmaquery -o slsc -l 3
# get sl2sc table entries from lid 3
opasmaquery -o scsl -l 3
# get sc2sl table entries from lid 3
| Intel Corporation | Copyright(C) 2015-2018 |