Scroll to navigation

opapmaquery(1) Master map: IFSFFCLIRG (Man Page) opapmaquery(1)

NAME

opapmaquery

(All) Performs individual PMA queries against a specific LID. It is very useful in displaying port runtime information.

Syntax

opapmaquery [-v] [-s sl] [-l lid] [-h hfi] [-p port] [-o otype]
[-m port] [-n mask] [-e mask] [-w mask]

Options

--help
Produces full help text.

-v
Specifies the verbose output. Can be specified more than once for additional openib debugging and libibumad debugging.

-s sl
Specifies different service level. Default is SM SL.

-l lid
Specifies the destination LID. Default is local port.

-h/--hfi hfi
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p port port is a system-wide port number. Default is 0.

-p/--port port
Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.

-o otype
Specifies the output type. Default is getportstatus. Refer to otype options vary by report for supported options.

Valid output types are:

classportinfo Specifies the class of port info.

getportstatus Specifies the list of port counters. Supported options:

[-m port] [-w vl mask]

clearportstatus Clears the port counters. Supported options:

[-n port mask] [-e counter mask] [-w vl mask]

getdatacounters Specifies the list of data counters. Supported options:

[-n port mask] [-w vl mask]

geterrorcounters Specifies the list of error counters. Supported options:

[-n port mask] [-w vl mask]

geterrorinfo Specifies the list of error info. Supported options:

[-n port mask]

clearerrorinfo Clears the error info. Supported options:

[-n port mask] [-e counter mask]

-h and -p options permit a variety of selections:

-h 0
First active port in system (Default).

-h 0 -p 0
First active port in system.

-h x
First active port on HFI x.

-h x -p 0
First active port on HFI x.

-h 0 -p y
Port y within system (no matter which ports are active).

-h x -p y
HFI x, port y.

otype options vary by report

-m port
Specifies the port in destination device to query/clear. Required when using -l option for all but -o classportinfo.

-n mask
Specifies the port mask, in hexadecimal. Bits represent ports 63-0. For example: 0x2 for port 1, 0x6 for ports 1, 2.

-e mask
Specifies the counter/error select mask, in hexadecimal. The following lists "Mask - Bit - Location for Counters". Where applicable, location "for Error Info" is presented. Default is all bits set (0xffffffe0).

  • 0x80000000 - 31 - Transmit Data (XmitData) For Error Info: Receive Error Info

  • 0x40000000 - 30 - Receive Data (RcvData) For Error Info: Excessive Buffer Overrun

  • 0x20000000 - 29 - Transmit Packets (XmitPkts) For Error Info: Transmit Const Error Info

  • 0x10000000 - 28 - Receive Packets (RcvPkts) For Error Info: Receive Const Error Info

  • 0x08000000 - 27 - Multicast Transmit Packets (MulticastXmitPkts) For Error Info: Receive Switch Relay Error Info

  • 0x04000000 - 26 - Multicast Receive Packets (MulticastRcvPkts) For Error Info: Uncorrectable Error Info

  • 0x02000000 - 25 - Transmit Wait (XmitWait) For Error Info: FM Configuration Error Info

  • 0x01000000 - 24 - Congestion Discards (CongDiscards)

  • 0x00800000 - 23 - Receive FECN (RcvFECN)

  • 0x00400000 - 22 - Receive BECN (RcvBECN)

  • 0x00200000 - 21 - Transmit Time Congestion (XmitTimeCong)

  • 0x00100000 - 20 - Transmit Time Wasted BW (XmitWastedBW)

  • 0x00080000 - 19 - Transmit Time Wait Data (XmitWaitData)

  • 0x00040000 - 18 - Receive Bubble (RcvBubble)

  • 0x00020000 - 17 - Mark FECN (MarkFECN)

  • 0x00010000 - 16 - Receive Constraint Errors (RcvConstraintErrors)

  • 0x00008000 - 15 - Receive Switch Relay (RcvSwitchRelayErrors)

  • 0x00004000 - 14 - Transmit Discards (XmitDiscards)

  • 0x00002000 - 13 - Transmit Constraint Errors (XmitConstraintErrors)

  • 0x00001000 - 12 - Receive Remote Physical Errors (RcvRemotePhysicalErrors)

  • 0x00000800 - 11 - Local Link Integrity (LocalLinkIntegrityErrors)

  • 0x00000400 - 10 - Receive Errors (RcvErrors)

  • 0x00000200 - 9 - Excessive Buffer Overrun (ExcessiveBufferOverruns)

  • 0x00000100 - 8 - FM Configuration Errors (FMConfigErrors)

  • 0x00000080 - 7 - Link Error Recovery (LinkErrorRecovery)

  • 0x00000040 - 6 - Link Error Downed (LinkDowned)

  • 0x00000020 - 5 - Uncorrectable Errors (UncorrectableErrors)

-w mask
Specifies the Virtual Lane Select Mask, in hexadecimal. Bits represent VL number 31-0. For example, 0x1 for VL 0, 0x3 for VL 0,1. Default is none.

Examples

opapmaquery -o classportinfo

opapmaquery -o getportstatus
# get data and error counts, local port

opapmaquery -o getdatacounters -n 0x2
# get data counts, local port 1

opapmaquery -o geterrorcounters -n 0x2
# get error counts, local port 1

opapmaquery -o clearportstatus -n 0x2
# clear all counters local port 1

opapmaquery -o geterrorinfo -n 0x2
# get error info for local port 1

opapmaquery -o clearerrorinfo -n 0x2
# clear all error info, local port 1
opapmaquery -o getdatacounters -l 6 -n 0x7e -w 0x1
# for device at LID 6, get data counters on ports 1-6, inclusive of VL 0 data

opapmaquery -o clearportstatus -l 6 -n 0x2 -e 0x1ffff
# for device at LID 6, on port 1, clear only error counters

opapmaquery -o clearerrorinfo -l 6 -n 0x2 -e 0x04000000
# for device at LID 6, on ports 1, clear uncorrectable error info

Intel Corporation Copyright(C) 2015-2018