## table of contents

- buster 4.05.0-11

StdLabels.List(3o) | OCamldoc | StdLabels.List(3o) |

# NAME¶

StdLabels.List - no description# Module¶

Module StdLabels.List# Documentation¶

Module**List**:

**(module ListLabels)**

*val length* : **'a list -> int**

Return the length (number of elements) of the given list.

*val hd* : **'a list -> 'a**

Return the first element of the given list. Raise **Failure
hd** if the list is empty.

*val compare_lengths* : **'a list -> 'b list ->
int**

Compare the lengths of two lists. **compare_lengths l1 l2** is
equivalent to **compare (length l1) (length l2)** , except that the
computation stops after itering on the shortest list.

**Since** 4.05.0

*val compare_length_with* : **'a list -> len:int ->
int**

Compare the length of a list to an integer. **compare_length_with
l n** is equivalent to **compare (length l) n** , except that the
computation stops after at most **n** iterations on the list.

**Since** 4.05.0

*val cons* : **'a -> 'a list -> 'a list**

**cons x xs** is **x :: xs**

**Since** 4.05.0

*val tl* : **'a list -> 'a list**

Return the given list without its first element. Raise **Failure
tl** if the list is empty.

*val nth* : **'a list -> int -> 'a**

Return the **n** -th element of the given list. The first
element (head of the list) is at position 0. Raise **Failure nth** if the
list is too short. Raise **Invalid_argument List.nth** if **n** is
negative.

*val nth_opt* : **'a list -> int -> 'a option**

Return the **n** -th element of the given list. The first
element (head of the list) is at position 0. Return **None** if the list
is too short. Raise **Invalid_argument List.nth** if **n** is
negative.

**Since** 4.05

*val rev* : **'a list -> 'a list**

List reversal.

*val append* : **'a list -> 'a list -> 'a list**

Catenate two lists. Same function as the infix operator **@** .
Not tail-recursive (length of the first argument). The **@** operator is
not tail-recursive either.

*val rev_append* : **'a list -> 'a list -> 'a
list**

**List.rev_append l1 l2** reverses **l1** and concatenates
it to **l2** . This is equivalent to **List.rev** **l1 @ l2** , but
**rev_append** is tail-recursive and more efficient.

*val concat* : **'a list list -> 'a list**

Concatenate a list of lists. The elements of the argument are all concatenated together (in the same order) to give the result. Not tail-recursive (length of the argument + length of the longest sub-list).

*val flatten* : **'a list list -> 'a list**

Same as **concat** . Not tail-recursive (length of the argument
+ length of the longest sub-list).

**===** **Iterators** **===**

*val iter* : **f:('a -> unit) -> 'a list ->
unit**

**List.iter f [a1; ...; an]** applies function **f** in turn
to **a1; ...; an** . It is equivalent to **begin f a1; f a2; ...; f an;
() end** .

*val iteri* : **f:(int -> 'a -> unit) -> 'a list
-> unit**

Same as **List.iter** , but the function is applied to the
index of the element as first argument (counting from 0), and the element
itself as second argument.

**Since** 4.00.0

*val map* : **f:('a -> 'b) -> 'a list -> 'b
list**

**List.map f [a1; ...; an]** applies function **f** to
**a1, ..., an** , and builds the list **[f a1; ...; f an]** with the
results returned by **f** . Not tail-recursive.

*val mapi* : **f:(int -> 'a -> 'b) -> 'a list ->
'b list**

Same as **List.map** , but the function is applied to the index
of the element as first argument (counting from 0), and the element itself
as second argument.

**Since** 4.00.0

*val rev_map* : **f:('a -> 'b) -> 'a list -> 'b
list**

**List.rev_map f l** gives the same result as **List.rev**
**(** **List.map** **f l)** , but is tail-recursive and more
efficient.

*val fold_left* : **f:('a -> 'b -> 'a) -> init:'a
-> 'b list -> 'a**

**List.fold_left f a [b1; ...; bn]** is **f (... (f (f a b1)
b2) ...) bn** .

*val fold_right* : **f:('a -> 'b -> 'b) -> 'a list
-> init:'b -> 'b**

**List.fold_right f [a1; ...; an] b** is **f a1 (f a2 (... (f
an b) ...))** . Not tail-recursive.

**===** **Iterators on two lists** **===**

*val iter2* : **f:('a -> 'b -> unit) -> 'a list
-> 'b list -> unit**

**List.iter2 f [a1; ...; an] [b1; ...; bn]** calls in turn **f
a1 b1; ...; f an bn** . Raise **Invalid_argument** if the two lists are
determined to have different lengths.

*val map2* : **f:('a -> 'b -> 'c) -> 'a list ->
'b list -> 'c list**

**List.map2 f [a1; ...; an] [b1; ...; bn]** is **[f a1 b1;
...; f an bn]** . Raise **Invalid_argument** if the two lists are
determined to have different lengths. Not tail-recursive.

*val rev_map2* : **f:('a -> 'b -> 'c) -> 'a list
-> 'b list -> 'c list**

**List.rev_map2 f l1 l2** gives the same result as
**List.rev** **(** **List.map2** **f l1 l2)** , but is
tail-recursive and more efficient.

*val fold_left2* : **f:('a -> 'b -> 'c -> 'a) ->
init:'a -> 'b list -> 'c list -> 'a**

**List.fold_left2 f a [b1; ...; bn] [c1; ...; cn]** is **f
(... (f (f a b1 c1) b2 c2) ...) bn cn** . Raise **Invalid_argument** if
the two lists are determined to have different lengths.

*val fold_right2* : **f:('a -> 'b -> 'c -> 'c)
-> 'a list -> 'b list -> init:'c -> 'c**

**List.fold_right2 f [a1; ...; an] [b1; ...; bn] c** is **f a1
b1 (f a2 b2 (... (f an bn c) ...))** . Raise **Invalid_argument** if
the two lists are determined to have different lengths. Not
tail-recursive.

**===** **List scanning** **===**

*val for_all* : **f:('a -> bool) -> 'a list ->
bool**

**for_all p [a1; ...; an]** checks if all elements of the list
satisfy the predicate **p** . That is, it returns **(p a1) && (p
a2) && ... && (p an)** .

*val exists* : **f:('a -> bool) -> 'a list ->
bool**

**exists p [a1; ...; an]** checks if at least one element of
the list satisfies the predicate **p** . That is, it returns **(p a1) ||
(p a2) || ... || (p an)** .

*val for_all2* : **f:('a -> 'b -> bool) -> 'a list
-> 'b list -> bool**

Same as **List.for_all** , but for a two-argument predicate.
Raise **Invalid_argument** if the two lists are determined to have
different lengths.

*val exists2* : **f:('a -> 'b -> bool) -> 'a list
-> 'b list -> bool**

Same as **List.exists** , but for a two-argument predicate.
Raise **Invalid_argument** if the two lists are determined to have
different lengths.

*val mem* : **'a -> set:'a list -> bool**

**mem a l** is true if and only if **a** is equal to an
element of **l** .

*val memq* : **'a -> set:'a list -> bool**

Same as **List.mem** , but uses physical equality instead of
structural equality to compare list elements.

**===** **List searching** **===**

*val find* : **f:('a -> bool) -> 'a list ->
'a**

**find p l** returns the first element of the list **l**
that satisfies the predicate **p** . Raise **Not_found** if there is
no value that satisfies **p** in the list **l** .

*val find_opt* : **f:('a -> bool) -> 'a list -> 'a
option**

**find p l** returns the first element of the list **l**
that satisfies the predicate **p** . Returns **None** if there is no
value that satisfies **p** in the list **l** .

**Since** 4.05

*val filter* : **f:('a -> bool) -> 'a list -> 'a
list**

**filter p l** returns all the elements of the list **l**
that satisfy the predicate **p** . The order of the elements in the input
list is preserved.

*val find_all* : **f:('a -> bool) -> 'a list -> 'a
list**

**find_all** is another name for **List.filter** .

*val partition* : **f:('a -> bool) -> 'a list -> 'a
list * 'a list**

**partition p l** returns a pair of lists **(l1, l2)** ,
where **l1** is the list of all the elements of **l** that satisfy the
predicate **p** , and **l2** is the list of all the elements of
**l** that do not satisfy **p** . The order of the elements in the
input list is preserved.

**===** **Association lists** **===**

*val assoc* : **'a -> ('a * 'b) list -> 'b**

**assoc a l** returns the value associated with key **a** in
the list of pairs **l** . That is, **assoc a [ ...; (a,b); ...] = b**
if **(a,b)** is the leftmost binding of **a** in list **l** . Raise
**Not_found** if there is no value associated with **a** in the list
**l** .

*val assoc_opt* : **'a -> ('a * 'b) list -> 'b
option**

**assoc_opt a l** returns the value associated with key
**a** in the list of pairs **l** . That is, **assoc a [ ...; (a,b);
...] = b** if **(a,b)** is the leftmost binding of **a** in list
**l** . Returns **None** if there is no value associated with **a**
in the list **l** .

**Since** 4.05

*val assq* : **'a -> ('a * 'b) list -> 'b**

Same as **List.assoc** , but uses physical equality instead of
structural equality to compare keys.

*val assq_opt* : **'a -> ('a * 'b) list -> 'b
option**

Same as **List.assoc_opt** , but uses physical equality instead
of structural equality to compare keys.

**Since** 4.05.0

*val mem_assoc* : **'a -> map:('a * 'b) list ->
bool**

Same as **List.assoc** , but simply return true if a binding
exists, and false if no bindings exist for the given key.

*val mem_assq* : **'a -> map:('a * 'b) list ->
bool**

Same as **List.mem_assoc** , but uses physical equality instead
of structural equality to compare keys.

*val remove_assoc* : **'a -> ('a * 'b) list -> ('a *
'b) list**

**remove_assoc a l** returns the list of pairs **l** without
the first pair with key **a** , if any. Not tail-recursive.

*val remove_assq* : **'a -> ('a * 'b) list -> ('a *
'b) list**

Same as **List.remove_assoc** , but uses physical equality
instead of structural equality to compare keys. Not tail-recursive.

**===** **Lists of pairs** **===**

*val split* : **('a * 'b) list -> 'a list * 'b
list**

Transform a list of pairs into a pair of lists: **split [(a1,b1);
...; (an,bn)]** is **([a1; ...; an], [b1; ...; bn])** . Not
tail-recursive.

*val combine* : **'a list -> 'b list -> ('a * 'b)
list**

Transform a pair of lists into a list of pairs: **combine [a1;
...; an] [b1; ...; bn]** is **[(a1,b1); ...; (an,bn)]** . Raise
**Invalid_argument** if the two lists have different lengths. Not
tail-recursive.

**===** **Sorting** **===**

*val sort* : **cmp:('a -> 'a -> int) -> 'a list
-> 'a list**

Sort a list in increasing order according to a comparison
function. The comparison function must return 0 if its arguments compare as
equal, a positive integer if the first is greater, and a negative integer if
the first is smaller (see Array.sort for a complete specification). For
example, **Pervasives.compare** is a suitable comparison function. The
resulting list is sorted in increasing order. **List.sort** is guaranteed
to run in constant heap space (in addition to the size of the result list)
and logarithmic stack space.

The current implementation uses Merge Sort. It runs in constant heap space and logarithmic stack space.

*val stable_sort* : **cmp:('a -> 'a -> int) -> 'a
list -> 'a list**

Same as **List.sort** , but the sorting algorithm is guaranteed
to be stable (i.e. elements that compare equal are kept in their original
order) .

The current implementation uses Merge Sort. It runs in constant heap space and logarithmic stack space.

*val fast_sort* : **cmp:('a -> 'a -> int) -> 'a
list -> 'a list**

Same as **List.sort** or **List.stable_sort** , whichever is
faster on typical input.

*val sort_uniq* : **cmp:('a -> 'a -> int) -> 'a
list -> 'a list**

Same as **List.sort** , but also remove duplicates.

**Since** 4.03.0

*val merge* : **cmp:('a -> 'a -> int) -> 'a list
-> 'a list -> 'a list**

Merge two lists: Assuming that **l1** and **l2** are sorted
according to the comparison function **cmp** , **merge cmp l1 l2**
will return a sorted list containting all the elements of **l1** and
**l2** . If several elements compare equal, the elements of **l1**
will be before the elements of **l2** . Not tail-recursive (sum of the
lengths of the arguments).

source: | 2019-01-25 |