Scroll to navigation

UVSCOM(4) Device Drivers Manual UVSCOM(4)

NAME

uvscom —
USB support for SUNTAC Slipper U VS-10U serial adapters driver

SYNOPSIS

To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb
device ucom
device uvscom

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

uvscom_load="YES"

HARDWARE

The uvscom driver supports the following adapters:

  • DDI Pocket Air H" C@rd
  • DDI Pocket Air H" C@rd 64
  • NTT P-in
  • NTT P-in m@ster

DESCRIPTION

The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip. Slipper U is a PC Card to USB converter for data communication card adapters.

The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

FILES

/dev/ttyU*
for callin ports
/dev/ttyU*.init
 
/dev/ttyU*.lock
corresponding callin initial-state and lock-state devices

/dev/cuaU*
for callout ports
/dev/cuaU*.init
 
/dev/cuaU*.lock
corresponding callout initial-state and lock-state devices

SEE ALSO

tty(4), ucom(4), usb(4)

HISTORY

The uvscom driver first appeared in FreeBSD and later in NetBSD 1.6. This manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002.
April 26, 2017 Linux 4.19.0-10-amd64