table of contents
SN(4) | Device Drivers Manual | SN(4) |
NAME¶
sn
—
SYNOPSIS¶
To compile this driver into the kernel, place the following lines in your kernel configuration file:device sn
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_sn_load="YES"
DEPRECATION NOTICE¶
Thesn
driver is not present in FreeBSD
13.0 and later. See
https://github.com/freebsd/fcp/blob/master/fcp-0101.md for more information.
DESCRIPTION¶
Thesn
device driver supports SMC91Cxx based ISA and
PCMCIA cards.
HARDWARE¶
Thesn
driver supports SMC91Cxx based ISA and PCMCIA
cards including:
- 3Com Megahertz X-Jack Ethernet PC Card XJ10BT, XJ10BC
- 3Com Megahertz XJEM and CCEM series: CCEM3288C, CCEM3288T, CCEM3336, CEM3336C, CCEM3336T, XJEM1144C, XJEM1144T, XJEM3288C, XJEM3288T, XJEM3336
- Farallon EtherMac PC Card 595a
- Motorola Mariner Ethernet/Modem PC Card
- Ositech Seven of Diamonds Ethernet PC Card
- Ositech Jack of Hearts Ethernet/Modem PC Card
- Psion Gold Card Netglobal Ethernet PC Card
- Psion Gold Card Netglobal 10/100 Fast Ethernet PC Card
- Psion Gold Card Netglobal 56k+10Mb Ethernet PC Card
- SMC EZEther PC Card (8020BT)
- SMC EZEther PC Card (8020T)
The sn
driver supports the SMC 91C90, SMC
91C92, SMC 91C94, SMC 91C95, SMC 91C96, SMC91C100 and SMC 91C100FD chips
from SMC.
The Farallon EtherWave and EtherMac card came in two varieties.
The ep(4) driver supports the 595 and 895 cards. These
cards have the blue arrow on the front along with a 3Com logo. The Farallon
595a cards, which have a red arrow on the front, are also called EtherWave
and EtherMac. They are supported by the sn
driver.
SEE ALSO¶
ed(4), ep(4), intro(4), ng_ether(4), vx(4), ifconfig(8)HISTORY¶
Thesn
device driver appeared in
FreeBSD 4.0.
October 24, 2018 | Linux 4.19.0-10-amd64 |