.TH FENCE_AGENT 8 2009-10-20 "fence_sanbox2 (Fence Agent)"
.SH NAME
fence_sanbox2 - Fence agent for QLogic SANBox2 FC switches
.SH DESCRIPTION
.P
fence_sanbox2 is an I/O Fencing agent which can be used with QLogic SANBox2 FC switches.  It logs into a SANBox2 switch via telnet and disables a specified port. Disabling  the port which a machine is connected to effectively fences that machine. Lengthy telnet connections to the switch should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.
.P
fence_sanbox2 accepts options on the command line as well
as from stdin. Fenced sends parameters through stdin when it execs the
agent. fence_sanbox2 can be run by itself with command
line options.  This is useful for testing and for turning outlets on or off
from scripts.

Vendor URL: http://www.qlogic.com
.SH PARAMETERS

	
.TP
.B -o, --action=[action]
. 
Fencing action (Default Value: off)
	
	
.TP
.B -c, --command-prompt=[prompt]
. 
Force Python regex for command prompt (Default Value: [' #> '])
	
.TP
.B -4, --inet4-only
. 
Forces agent to use IPv4 addresses only
	
.TP
.B -6, --inet6-only
. 
Forces agent to use IPv6 addresses only
	
.TP
.B -a, --ip=[ip]
. 
IP address or hostname of fencing device This parameter is always required.
	
	
.TP
.B -u, --ipport=[port]
. 
TCP/UDP port to use for connection with device (Default Value: 23)
	
	
	
	
.TP
.B -p, --password=[password]
. 
Login password or passphrase
	
.TP
.B -S, --password-script=[script]
. 
Script to run to retrieve password
	
.TP
.B -n, --plug=[id]
. 
Physical plug number on device, UUID or identification of machine This parameter is always required.
	
	
.TP
.B -l, --username=[name]
. 
Login name This parameter is always required.
	
.TP
.B -q, --quiet
. 
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
	
.TP
.B -v, --verbose
. 
Verbose mode
	
	
.TP
.B -D, --debug-file=[debugfile]
. 
Write debug information to given file
	
.TP
.B -V, --version
. 
Display version information and exit
	
.TP
.B -h, --help
. 
Display help and exit
	
.TP
.B -C, --separator=[char]
. 
Separator for CSV created by 'list' operation (Default Value: ,)
	
.TP
.B --delay=[seconds]
. 
Wait X seconds before fencing is started (Default Value: 0)
	
.TP
.B --login-timeout=[seconds]
. 
Wait X seconds for cmd prompt after login (Default Value: 5)
	
.TP
.B --power-timeout=[seconds]
. 
Test X seconds for status change after ON/OFF (Default Value: 20)
	
.TP
.B --power-wait=[seconds]
. 
Wait X seconds after issuing ON/OFF (Default Value: 0)
	
.TP
.B --shell-timeout=[seconds]
. 
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
	
.TP
.B --retry-on=[attempts]
. 
Count of attempts to retry power on (Default Value: 1)
	
.TP
.B --telnet-path=[path]
. 
Path to telnet binary (Default Value: /usr/bin/telnet)

.SH ACTIONS

	
.TP
\fBon \fP
Power on machine.
	
.TP
\fBoff \fP
Power off machine.
	
.TP
\fBstatus \fP
This returns the status of the plug/virtual machine.
	
.TP
\fBlist \fP
List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.
	
.TP
\fBlist-status \fP
List available plugs with aliases/virtual machines and their power state if it can be obtained without additional commands.
	
.TP
\fBmonitor \fP
Check the health of fence device
	
.TP
\fBmetadata \fP
Display the XML metadata describing this resource.
	
.TP
\fBmanpage \fP
 The operational behavior of this is not known.
	
.TP
\fBvalidate-all \fP
Validate if all required parameters are entered.

.SH STDIN PARAMETERS

	
.TP
.B action
. 
Fencing action (Default Value: off)
	
	
.TP
.B command_prompt
. 
Force Python regex for command prompt (Default Value: [' #> ']) Obsoletes: cmd_prompt
	
.TP
.B inet4_only
. 
Forces agent to use IPv4 addresses only
	
.TP
.B inet6_only
. 
Forces agent to use IPv6 addresses only
	
.TP
.B ip
. 
IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
	
	
.TP
.B ipport
. 
TCP/UDP port to use for connection with device (Default Value: 23)
	
	
	
	
.TP
.B password
. 
Login password or passphrase Obsoletes: passwd
	
.TP
.B password_script
. 
Script to run to retrieve password Obsoletes: passwd_script
	
.TP
.B plug
. 
Physical plug number on device, UUID or identification of machine This parameter is always required. Obsoletes: port
	
	
.TP
.B username
. 
Login name This parameter is always required. Obsoletes: login
	
.TP
.B quiet
. 
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
	
.TP
.B verbose
. 
Verbose mode
	
	
.TP
.B debug_file
. 
Write debug information to given file Obsoletes: debug
	
.TP
.B version
. 
Display version information and exit
	
.TP
.B help
. 
Display help and exit
	
.TP
.B separator
. 
Separator for CSV created by 'list' operation (Default Value: ,)
	
.TP
.B delay
. 
Wait X seconds before fencing is started (Default Value: 0)
	
.TP
.B login_timeout
. 
Wait X seconds for cmd prompt after login (Default Value: 5)
	
.TP
.B power_timeout
. 
Test X seconds for status change after ON/OFF (Default Value: 20)
	
.TP
.B power_wait
. 
Wait X seconds after issuing ON/OFF (Default Value: 0)
	
.TP
.B shell_timeout
. 
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
	
.TP
.B retry_on
. 
Count of attempts to retry power on (Default Value: 1)
	
.TP
.B telnet_path
. 
Path to telnet binary (Default Value: /usr/bin/telnet)