.TH FORS_TRACE_FLAT "7" "5.3.32" "fors_trace_flat" "fors recipes" .SH NAME fors_trace_flat \- Determine spectral curvature model .SH SYNOPSIS esorex .B fors_trace_flat [OPTIONS] FILE.sof .SH DESCRIPTION This recipe is used to trace the edges of MOS/MXU flat field slit spectra and determine the spectral curvature solution. The input master flat field image, product of the recipe fors_flat, is expected to be oriented with horizontal dispersion direction and red wavelengths on the right side. .PP The input slits location table should be the product of the recipe fors_detect_spectra. .PP The input master flat image is shifted one pixel down and is subtracted from the original image. The result is a vertical gradient map. Next, the negative values are forced positive, to obtain an absolute gradient map. The map is passed with a horizontal median filter, and after that the gradient peaks are traced starting from the slits positions listed in the input slits location table. The number of pixels to the left and to the right of the reference pixel is trivially derived from the specified spectral range and spectral dispersion. .PP The output spectral curvature table contains the coefficients of the polynomial fitting of the found traces, while the output trace table contains the traced spectral edges positions in CCD (Y) coordinates for each spectrum, and their comparison with their modeling. A spatial map is also created, where to each CCD pixel is assigned the value of the spatial coordinate along the slit (in pixel). For more details please refer to the FORS Pipeline User\'s Manual. .PP Note that specifying an input GRISM_TABLE will set some of the recipe configuration parameters to default values valid for a particular grism. .PP Again, see the pipeline manual for more details. .PP In the table below the MXU acronym can be alternatively read as MOS. .PP Input files: DO category: Type: Explanation: Required: MASTER_SCREEN_FLAT_MXU Calib Master flat frame Y SLIT_LOCATION_DETECT_MXU Calib Slits location Y GRISM_TABLE Calib Grism table . .PP Output files: DO category: Data type: Explanation: CURV_TRACES_MXU FITS table Flat field tracings CURV_COEFF_MXU FITS table Spectral curvature table SPATIAL_MAP_MXU FITS image Map of spatial coordinate .SH OPTIONS .TP \fB\-\-dispersion\fR \fI\fR Expected spectral dispersion (Angstrom/pixel) (float; default: 0.0). The full name of this option for the EsoRex configuration file is \fBfors.fors_trace_flat.dispersion\fR [default = \fI0.0\fR]. .TP \fB\-\-startwavelength\fR \fI\fR Start wavelength in spectral extraction (float; default: 0.0). The full name of this option for the EsoRex configuration file is \fBfors.fors_trace_flat.startwavelength\fR [default = \fI0.0\fR]. .TP \fB\-\-endwavelength\fR \fI\fR End wavelength in spectral extraction (float; default: 0.0). The full name of this option for the EsoRex configuration file is \fBfors.fors_trace_flat.endwavelength\fR [default = \fI0.0\fR]. .TP \fB\-\-cdegree\fR \fI\fR Degree of spectral curvature polynomial (int; default: 0). The full name of this option for the EsoRex configuration file is \fBfors.fors_trace_flat.cdegree\fR [default = \fI0\fR]. .TP \fB\-\-cmode\fR \fI\fR Interpolation mode of curvature solution applicable to MOS\-like data (0 = no interpolation, 1 = fill gaps, 2 = global model) (int; default: 1). The full name of this option for the EsoRex configuration file is \fBfors.fors_trace_flat.cmode\fR [default = \fI1\fR]. .PP Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex \-\-help' command. .SH SEE ALSO The full documentation for the fors pipeline can be downloaded as a PDF file using the following URL: .IP .B ftp://ftp.eso.org/pub/dfs/pipelines/fors/fors\-pipeline\-manual\-4.9.pdf .PP An overview over the existing ESO pipelines can be found on the web page \fBhttps://www.eso.org/sci/software/pipelines/\fR. .PP Basic documentation about the EsoRex program can be found at the esorex (1) man page. .PP It is possible to call the pipelines from python using the python\-cpl package. See \fBhttps://packages.python.org/python\-cpl/index.html\fR for further information. .PP The other recipes of the fors pipeline are .IR fors_align_sky (7), .IR fors_align_sky_lss (7), .IR fors_bias (7), .IR fors_calib (7), .IR fors_config (7), .IR fors_dark (7), .IR fors_detect_objects (7), .IR fors_detect_spectra (7), .IR fors_extract (7), .IR fors_extract_objects (7), .IR fors_extract_slits (7), .IR fors_flatfield (7), .IR fors_img_science (7), .IR fors_img_screen_flat (7), .IR fors_img_sky_flat (7), .IR fors_normalise_flat (7), .IR fors_photometry (7), .IR fors_pmos_calib (7), .IR fors_pmos_extract (7), .IR fors_pmos_science (7), .IR fors_remove_bias (7), .IR fors_resample (7), .IR fors_science (7), .IR fors_spec_mflat (7), .IR fors_subtract_sky (7), .IR fors_subtract_sky_lss (7), .IR fors_sumflux (7), .IR fors_wave_calib (7), .IR fors_wave_calib_lss (7), .IR fors_zeropoint (7) .SH VERSION fors_trace_flat 5.3.32 .SH AUTHOR Carlo Izzo .SH BUG REPORTS Please report any problems to usd\-help@eso.org. Alternatively, you may send a report to the ESO User Support Department . .SH LICENSE This file is currently part of the FORS Instrument Pipeline Copyright (C) 2002\-2010 European Southern Observatory This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110\-1301 USA