NAME¶
bspwm - Binary space partitioning window manager
SYNOPSIS¶
bspwm [-h|-v|-c CONFIG_PATH]
bspc DOMAIN [SELECTOR] COMMANDS
bspc COMMAND [OPTIONS] [ARGUMENTS]
DESCRIPTION¶
bspwm is a tiling window manager that represents windows as the leaves of
a full binary tree.
It is controlled and configured via bspc.
OPTIONS¶
-h
Print the synopsis and exit.
-v
Print the version and exit.
-c CONFIG_PATH
Use the given configuration file.
COMMON DEFINITIONS¶
DIR := north | west | south | east
CYCLE_DIR := next | prev
SELECTORS¶
Selectors are used to select a target node, desktop, or monitor. A selector can
either describe the target relatively or name it globally.
Selectors consist of an optional reference, a descriptor and any
number of non-conflicting modifiers as follows:
[REFERENCE#]DESCRIPTOR(.MODIFIER)*
The relative targets are computed in relation to the given
reference (the default reference value is focused).
An exclamation mark can be prepended to any modifier in order to
reverse its meaning.
The following characters cannot be used in monitor or desktop
names: #, :, ..
The special selector %<name> can be used to select a
monitor or a desktop with an invalid name.
Node¶
Select a node.
NODE_SEL := [NODE_SEL#](DIR|CYCLE_DIR|PATH|any|last|newest|
older|newer|focused|pointed|
biggest|<node_id>)[.[!]focused][.[!]automatic][.[!]local][.[!]active]
[.[!]leaf][.[!]window][.[!]STATE][.[!]FLAG][.[!]LAYER]
[.[!]same_class][.[!]descendant_of][.[!]ancestor_of]
STATE := tiled|pseudo_tiled|floating|fullscreen
FLAG := hidden|sticky|private|locked|marked|urgent
LAYER := below|normal|above
PATH := @[DESKTOP_SEL:][[/]JUMP](/JUMP)*
JUMP := first|1|second|2|brother|parent|DIR
Descriptors
DIR
Selects the window in the given (spacial) direction
relative to the reference node.
CYCLE_DIR
Selects the window in the given (cyclic) direction
relative to the reference node.
PATH
Selects the node at the given path.
any
Selects the first node that matches the given
selectors.
last
Selects the previously focused node relative to the
reference node.
newest
Selects the newest node in the history of the focused
node.
older
Selects the node older than the reference node in the
history.
newer
Selects the node newer than the reference node in the
history.
focused
Selects the currently focused node.
pointed
Selects the window under the pointer.
biggest
Selects the biggest window.
<node_id>
Selects the node with the given ID.
Path Jumps
The initial node is the focused node (or the root if the path
starts with /) of the reference desktop (or the selected desktop if
the path has a DESKTOP_SEL prefix).
1|first
Jumps to the first child.
2|second
Jumps to the second child.
brother
Jumps to the brother node.
parent
Jumps to the parent node.
DIR
Jumps to the node holding the edge in the given
direction.
Modifiers
[!]focused
Only consider focused or unfocused nodes.
[!]automatic
Only consider nodes in automatic or manual insertion
mode. See also --presel-dir under Node in the DOMAINS
section below.
[!]local
Only consider nodes in or not in the reference
desktop.
[!]active
Only consider nodes in or not in the active desktop of
their monitor.
[!]leaf
Only consider leaves or internal nodes.
[!]window
Only consider nodes that hold or don’t hold a
window.
[!](tiled|pseudo_tiled|floating|fullscreen)
Only consider windows in or not in the given state.
[!]same_class
Only consider windows that have or don’t have the
same class as the reference window.
[!]descendant_of
Only consider nodes that are or aren’t descendants
of the reference node.
[!]ancestor_of
Only consider nodes that are or aren’t ancestors
of the reference node.
[!](hidden|sticky|private|locked|marked|urgent)
Only consider windows that have or don’t have the
given flag set.
[!](below|normal|above)
Only consider windows in or not in the given layer.
Desktop¶
Select a desktop.
DESKTOP_SEL := [DESKTOP_SEL#](CYCLE_DIR|any|last|newest|older|newer|
[MONITOR_SEL:](focused|^<n>)|
<desktop_id>|<desktop_name>)[.[!]occupied][.[!]focused][.[!]urgent][.[!]local]
Descriptors
CYCLE_DIR
Selects the desktop in the given direction relative to
the reference desktop.
any
Selects the first desktop that matches the given
selectors.
last
Selects the previously focused desktop relative to the
reference desktop.
newest
Selects the newest desktop in the history of the focused
desktops.
older
Selects the desktop older than the reference desktop in
the history.
newer
Selects the desktop newer than the reference desktop in
the history.
focused
Selects the currently focused desktop.
^<n>
Selects the nth desktop. If MONITOR_SEL is given,
selects the nth desktop on the selected monitor.
<desktop_id>
Selects the desktop with the given ID.
<desktop_name>
Selects the desktop with the given name.
Modifiers
[!]occupied
Only consider occupied or free desktops.
[!]focused
Only consider focused or unfocused desktops.
[!]urgent
Only consider urgent or non urgent desktops.
[!]local
Only consider desktops inside or outside of the reference
monitor.
Monitor¶
Select a monitor.
MONITOR_SEL := [MONITOR_SEL#](DIR|CYCLE_DIR|any|last|newest|older|newer|
focused|pointed|primary|^<n>|
<monitor_id>|<monitor_name>)[.[!]occupied][.[!]focused]
Descriptors
DIR
Selects the monitor in the given (spacial) direction
relative to the reference monitor.
CYCLE_DIR
Selects the monitor in the given (cyclic) direction
relative to the reference monitor.
any
Selects the first monitor that matches the given
selectors.
last
Selects the previously focused monitor relative to the
reference monitor.
newest
Selects the newest monitor in the history of the focused
monitors.
older
Selects the monitor older than the reference monitor in
the history.
newer
Selects the monitor newer than the reference monitor in
the history.
focused
Selects the currently focused monitor.
pointed
Selects the monitor under the pointer.
primary
Selects the primary monitor.
^<n>
Selects the nth monitor.
<monitor_id>
Selects the monitor with the given ID.
<monitor_name>
Selects the monitor with the given name.
Modifiers
[!]occupied
Only consider monitors where the focused desktop is
occupied or free.
[!]focused
Only consider focused or unfocused monitors.
WINDOW STATES¶
tiled
Its size and position are determined by the splitting
type and ratio of each node of its path in the window tree.
pseudo_tiled
Has an unrestricted size while being centered in its
tiling space.
floating
Can be moved/resized freely. Although it doesn’t
occupy any tiling space, it is still part of the window tree.
fullscreen
Fills its monitor rectangle and has no borders. It is
send in the ABOVE layer by default.
NODE FLAGS¶
hidden
Is hidden and doesn’t occupy any tiling
space.
sticky
Stays in the focused desktop of its monitor.
private
Tries to keep the same tiling position/size.
locked
Ignores the node --close message.
marked
Is marked (useful for deferred actions). A marked node
becomes unmarked after being sent on a preselected node.
urgent
Has its urgency hint set. This flag is set
externally.
STACKING LAYERS¶
There’s three stacking layers: BELOW, NORMAL and ABOVE.
In each layer, the window are orderered as follow: tiled &
pseudo-tiled < fullscreen < floating.
RECEPTACLES¶
A leaf node that doesn’t hold any window is called a receptacle. When a
node is inserted on a receptacle in automatic mode, it will replace the
receptacle. A receptacle can be inserted on a node and preselected.
Receptacles can therefore be used to build a tree whose leaves are
receptacles. Using the appropriate rules, one can then send windows on the
leaves of this tree. This feature is used in examples/receptacles to
store and recreate layouts.
DOMAINS¶
Node¶
General Syntax
node [NODE_SEL] COMMANDS
If NODE_SEL is omitted, focused is assumed.
Commands
-f, --focus [NODE_SEL]
Focus the selected or given node.
-a, --activate [NODE_SEL]
Activate the selected or given node.
-d, --to-desktop DESKTOP_SEL
[--follow]
Send the selected node to the given desktop. If
--follow is passed, the focused node will stay focused.
-m, --to-monitor MONITOR_SEL
[--follow]
Send the selected node to the given monitor. If
--follow is passed, the focused node will stay focused.
-n, --to-node NODE_SEL [--follow]
Send the selected node on the given node. If
--follow is passed, the focused node will stay focused.
-s, --swap NODE_SEL [--follow]
Swap the selected node with the given node. If
--follow is passed, the focused node will stay focused.
-p, --presel-dir [~]DIR|cancel
Preselect the splitting area of the selected node (or
cancel the preselection). If ~ is prepended to DIR and the
current preselection direction matches DIR, then the argument is
interpreted as cancel. A node with a preselected area is said to be in
"manual insertion mode".
-o, --presel-ratio RATIO
Set the splitting ratio of the preselection area.
-v, --move dx dy
Move the selected window by dx pixels horizontally
and dy pixels vertically.
-z, --resize
top|left|bottom|right|top_left|top_right|bottom_right|bottom_left dx
dy
Resize the selected window by moving the given handle by
dx pixels horizontally and dy pixels vertically.
-r, --ratio
RATIO|(+|-)(PIXELS|FRACTION)
Set the splitting ratio of the selected node (0 <
RATIO < 1).
-R, --rotate 90|270|180
Rotate the tree rooted at the selected node.
-F, --flip horizontal|vertical
Flip the the tree rooted at selected node.
-E, --equalize
Reset the split ratios of the tree rooted at the selected
node to their default value.
-B, --balance
Adjust the split ratios of the tree rooted at the
selected node so that all windows occupy the same area.
-C, --circulate forward|backward
Circulate the windows of the tree rooted at the selected
node.
-t, --state
[~](tiled|pseudo_tiled|floating|fullscreen)
Set the state of the selected window. If ~ is
present and the current state matches the given state, then the argument is
interpreted as the last state.
-g, --flag
hidden|sticky|private|locked|marked[=on|off]
Set or toggle the given flag for the selected node.
-l, --layer below|normal|above
Set the stacking layer of the selected window.
-i, --insert-receptacle
Insert a receptacle node at the selected node.
-c, --close
Close the windows rooted at the selected node.
-k, --kill
Kill the windows rooted at the selected node.
Desktop¶
General Syntax
desktop [DESKTOP_SEL] COMMANDS
If DESKTOP_SEL is omitted, focused is assumed.
COMMANDS
-f, --focus [DESKTOP_SEL]
Focus the selected or given desktop.
-a, --activate [DESKTOP_SEL]
Activate the selected or given desktop.
-m, --to-monitor MONITOR_SEL
[--follow]
Send the selected desktop to the given monitor. If
--follow is passed, the focused desktop will stay focused.
-s, --swap DESKTOP_SEL [--follow]
Swap the selected desktop with the given desktop. If
--follow is passed, the focused desktop will stay focused.
-l, --layout CYCLE_DIR|monocle|tiled
Set or cycle the layout of the selected desktop.
-n, --rename <new_name>
Rename the selected desktop.
-b, --bubble CYCLE_DIR
Bubble the selected desktop in the given direction.
-r, --remove
Remove the selected desktop.
Monitor¶
General Syntax
monitor [MONITOR_SEL] COMMANDS
If MONITOR_SEL is omitted, focused is assumed.
Commands
-f, --focus [MONITOR_SEL]
Focus the selected or given monitor.
-s, --swap MONITOR_SEL
Swap the selected monitor with the given monitor.
-a, --add-desktops <name>...
Create desktops with the given names in the selected
monitor.
-o, --reorder-desktops <name>...
Reorder the desktops of the selected monitor to match the
given order.
-d, --reset-desktops <name>...
Rename, add or remove desktops depending on whether the
number of given names is equal, superior or inferior to the number of existing
desktops.
-g, --rectangle WxH+X+Y
Set the rectangle of the selected monitor.
-n, --rename <new_name>
Rename the selected monitor.
-r, --remove
Remove the selected monitor.
Query¶
General Syntax
Commands
The optional selectors are references.
-N, --nodes [NODE_SEL]
List the IDs of the matching nodes.
-D, --desktops [DESKTOP_SEL]
List the IDs (or names) of the matching desktops.
-M, --monitors [MONITOR_SEL]
List the IDs (or names) of the matching monitors.
-T, --tree
Print a JSON representation of the matching item.
Options
-m,--monitor [MONITOR_SEL],
-d,--desktop [DESKTOP_SEL], -n, --node
[NODE_SEL]
Constrain matches to the selected monitor, desktop or
node. The descriptor can be omitted for -M, -D and
-N.
--names
Print names instead of IDs. Can only be used with
-M and -D.
General Syntax
Commands
-d, --dump-state
Dump the current world state on standard output.
-l, --load-state <file_path>
Load a world state from the given file.
-a, --add-monitor <name> WxH+X+Y
Add a monitor for the given name and rectangle.
-O, --reorder-monitors <name>...
Reorder the list of monitors to match the given
order.
-o, --adopt-orphans
Manage all the unmanaged windows remaining from a
previous session.
-h, --record-history on|off
Enable or disable the recording of node focus
history.
-g, --get-status
Print the current status information.
Rule¶
General Syntax
Commands
-a, --add
(<class_name>|*)[:(<instance_name>|*)]
[-o|--one-shot]
[monitor=MONITOR_SEL|desktop=DESKTOP_SEL|node=NODE_SEL] [state=STATE]
[layer=LAYER] [split_dir=DIR] [split_ratio=RATIO]
[(hidden|sticky|private|locked|marked|center|follow|manage|focus|border)=(on|off)]
[rectangle=WxH+X+Y]
Create a new rule.
-r, --remove
^<n>|head|tail|(<class_name>|*)[:(<instance_name>|*)]...
Remove the given rules.
-l, --list
List the rules.
Config¶
General Syntax
config [-m MONITOR_SEL|-d DESKTOP_SEL|-n
NODE_SEL] <setting> [<value>]
Get or set the value of <setting>.
Subscribe¶
General Syntax
subscribe [OPTIONS]
(all|report|monitor|desktop|node|...)*
Continuously print events. See the EVENTS section
for the description of each event.
Options
-f, --fifo
Print a path to a FIFO from which events can be read and
return.
-c, --count COUNT
Stop the corresponding bspc process after having
received COUNT events.
Quit¶
General Syntax
quit [<status>]
Quit with an optional exit status.
EXIT CODES¶
If the server can’t handle a message, bspc will return with a
non-zero exit code.
SETTINGS¶
Colors are in the form #RRGGBB, booleans are true, on,
false or off.
All the boolean settings are false by default unless stated
otherwise.
Global Settings¶
normal_border_color
Color of the border of an unfocused window.
active_border_color
Color of the border of a focused window of an unfocused
monitor.
focused_border_color
Color of the border of a focused window of a focused
monitor.
presel_feedback_color
Color of the node --presel-{dir,ratio} message
feedback area.
split_ratio
Default split ratio.
status_prefix
Prefix prepended to each of the status lines.
external_rules_command
External command used to retrieve rule consequences. The
command will receive the following arguments: window ID, class name, instance
name, and intermediate consequences. The output of that command must have the
following format: key1=value1 key2=value2 ... (the valid key/value
pairs are given in the description of the rule command).
initial_polarity
On which child should a new window be attached when
adding a window on a single window tree in automatic mode. Accept the
following values: first_child, second_child.
directional_focus_tightness
The tightness of the algorithm used to decide whether a
window is on the DIR side of another window. Accept the following
values: high, low.
borderless_monocle
Remove borders of tiled windows for the monocle
desktop layout.
gapless_monocle
Remove gaps of tiled windows for the monocle
desktop layout.
paddingless_monocle
Remove padding space for the monocle desktop
layout.
single_monocle
Set the desktop layout to monocle if
there’s only one tiled window in the tree.
pointer_motion_interval
The minimum interval, in milliseconds, between two motion
notify events.
pointer_modifier
Keyboard modifier used for moving or resizing windows.
Accept the following values: shift, control, lock,
mod1, mod2, mod3, mod4, mod5.
pointer_action1, pointer_action2,
pointer_action3
Action performed when pressing pointer_modifier +
button<n>. Accept the following values: move,
resize_side, resize_corner, focus, none.
click_to_focus
Button used for focusing a window (or a monitor). The
possible values are: button1, button2, button3,
any, none. Defaults to button1.
swallow_first_click
Don’t replay the click that makes a window focused
if click_to_focus isn’t none.
focus_follows_pointer
Focus the window under the pointer.
pointer_follows_focus
When focusing a window, put the pointer at its
center.
pointer_follows_monitor
When focusing a monitor, put the pointer at its
center.
mapping_events_count
Handle the next mapping_events_count mapping
notify events. A negative value implies that every event needs to be
handled.
ignore_ewmh_focus
Ignore EWMH focus requests coming from
applications.
ignore_ewmh_fullscreen
Block the fullscreen state transitions that originate
from an EWMH request. The possible values are: none, all, or a
comma separated list of the following values: enter, exit.
center_pseudo_tiled
Center pseudo tiled windows into their tiling rectangles.
Defaults to true.
honor_size_hints
Apply ICCCM window size hints.
remove_disabled_monitors
Consider disabled monitors as disconnected.
remove_unplugged_monitors
Remove unplugged monitors.
merge_overlapping_monitors
Merge overlapping monitors (the bigger remains).
Monitor and Desktop Settings¶
top_padding, right_padding, bottom_padding,
left_padding
Padding space added at the sides of the monitor or
desktop.
Desktop Settings¶
window_gap
Size of the gap that separates windows.
Node Settings¶
border_width
Window border width.
POINTER BINDINGS¶
click_to_focus
Focus the window (or the monitor) under the pointer if
the value isn’t none.
pointer_modifier + button1
Move the window under the pointer.
pointer_modifier + button2
Resize the window under the pointer by dragging the
nearest side.
pointer_modifier + button3
Resize the window under the pointer by dragging the
nearest corner.
The behavior of pointer_modifier + button<n>
can be modified through the pointer_action<n> setting.
EVENTS¶
report
See the next section for the description of the
format.
monitor_add <monitor_id> <monitor_name>
<monitor_geometry>
A monitor is added.
monitor_rename <monitor_id> <old_name>
<new_name>
A monitor is renamed.
monitor_remove <monitor_id>
A monitor is removed.
monitor_swap <src_monitor_id>
<dst_monitor_id>
A monitor is swapped.
monitor_focus <monitor_id>
A monitor is focused.
monitor_geometry <monitor_id>
<monitor_geometry>
The geometry of a monitor changed.
desktop_add <monitor_id> <desktop_id>
<desktop_name>
A desktop is added.
desktop_rename <monitor_id> <desktop_id>
<old_name> <new_name>
A desktop is renamed.
desktop_remove <monitor_id> <desktop_id>
A desktop is removed.
desktop_swap <src_monitor_id> <src_desktop_id>
<dst_monitor_id> <dst_desktop_id>
A desktop is swapped.
desktop_transfer <src_monitor_id> <src_desktop_id>
<dst_monitor_id>
A desktop is transferred.
desktop_focus <monitor_id> <desktop_id>
A desktop is focused.
desktop_activate <monitor_id> <desktop_id>
A desktop is activated.
desktop_layout <monitor_id> <desktop_id>
tiled|monocle
The layout of a desktop changed.
node_add <monitor_id> <desktop_id> <ip_id>
<node_id>
A node is added.
node_remove <monitor_id> <desktop_id>
<node_id>
A node is removed.
node_swap <src_monitor_id> <src_desktop_id>
<src_node_id> <dst_monitor_id> <dst_desktop_id>
<dst_node_id>
A node is swapped.
node_transfer <src_monitor_id> <src_desktop_id>
<src_node_id> <dst_monitor_id> <dst_desktop_id>
<dst_node_id>
A node is transferred.
node_focus <monitor_id> <desktop_id>
<node_id>
A node is focused.
node_activate <monitor_id> <desktop_id>
<node_id>
A node is activated.
node_presel <monitor_id> <desktop_id>
<node_id> (dir DIR|ratio RATIO|cancel)
A node is preselected.
node_stack <node_id_1> below|above
<node_id_2>
A node is stacked below or above another node.
node_geometry <monitor_id> <desktop_id>
<node_id> <node_geometry>
The geometry of a window changed.
node_state <monitor_id> <desktop_id>
<node_id> tiled|pseudo_tiled|floating|fullscreen on|off
The state of a window changed.
node_flag <monitor_id> <desktop_id> <node_id>
hidden|sticky|private|locked|marked|urgent on|off
One of the flags of a node changed.
node_layer <monitor_id> <desktop_id>
<node_id> below|normal|above
The layer of a window changed.
pointer_action <monitor_id> <desktop_id>
<node_id> move|resize_corner|resize_side begin|end
A pointer action occured.
Please note that bspwm initializes monitors before it reads
messages on its socket, therefore the initial monitor events can’t be
received.
Each report event message is composed of items separated by colons.
Each item has the form <type><value> where
<type> is the first character of the item.
M<monitor_name>
Focused monitor.
m<monitor_name>
Unfocused monitor.
O<desktop_name>
Occupied focused desktop.
o<desktop_name>
Occupied unfocused desktop.
F<desktop_name>
Free focused desktop.
f<desktop_name>
Free unfocused desktop.
U<desktop_name>
Urgent focused desktop.
u<desktop_name>
Urgent unfocused desktop.
L(T|M)
Layout of the focused desktop of a monitor.
T(T|P|F|=|@)
State of the focused node of a focused desktop.
G(S?P?L?)
Active flags of the focused node of a focused
desktop.
ENVIRONMENT VARIABLES¶
BSPWM_SOCKET
The path of the socket used for the communication between
bspc and bspwm. If it isn’t defined, then the following
path is used:
/tmp/bspwm<host_name>_<display_number>_<screen_number>-socket.
CONTRIBUTORS¶
•Steven Allen <steven at
stebalien.com>
•Thomas Adam <thomas at xteddy.org>
•Ivan Kanakarakis <ivan.kanak at
gmail.com>
AUTHOR¶
Bastien Dejean <nihilhill at gmail.com>
