Scroll to navigation

BORG-CREATE(1) borg backup tool BORG-CREATE(1)


borg-create - Create new archive


borg [common options] create [options] ARCHIVE [PATH...]


This command creates a backup archive containing all files found while recursively traversing all paths specified. Paths are added to the archive as they are given, that means if relative paths are desired, the command has to be run from the correct directory.

When giving '-' as path, borg will read data from standard input and create a file 'stdin' in the created archive from that data.

The archive will consume almost no disk space for files or parts of files that have already been stored in other archives.

The archive name needs to be unique. It must not end in '.checkpoint' or '.checkpoint.N' (with N being a number), because these names are used for checkpoints and treated in special ways.

In the archive name, you may use the following placeholders: {now}, {utcnow}, {fqdn}, {hostname}, {user} and some others.

Backup speed is increased by not reprocessing files that are already part of existing archives and weren't modified. The detection of unmodified files is done by comparing multiple file metadata values with previous values kept in the files cache.

This comparison can operate in different modes as given by --files-cache:

  • ctime,size,inode (default)
  • mtime,size,inode (default behaviour of borg versions older than 1.1.0rc4)
  • ctime,size (ignore the inode number)
  • mtime,size (ignore the inode number)
  • rechunk,ctime (all files are considered modified - rechunk, cache ctime)
  • rechunk,mtime (all files are considered modified - rechunk, cache mtime)
  • disabled (disable the files cache, all files considered modified - rechunk)

inode number: better safety, but often unstable on network filesystems

Normally, detecting file modifications will take inode information into consideration to improve the reliability of file change detection. This is problematic for files located on sshfs and similar network file systems which do not provide stable inode numbers, such files will always be considered modified. You can use modes without inode in this case to improve performance, but reliability of change detection might be reduced.

ctime vs. mtime: safety vs. speed

  • ctime is a rather safe way to detect changes to a file (metadata and contents) as it can not be set from userspace. But, a metadata-only change will already update the ctime, so there might be some unnecessary chunking/hashing even without content changes. Some filesystems do not support ctime (change time).
  • mtime usually works and only updates if file contents were changed. But mtime can be arbitrarily set from userspace, e.g. to set mtime back to the same value it had before a content change happened. This can be used maliciously as well as well-meant, but in both cases mtime based cache modes can be problematic.

The mount points of filesystems or filesystem snapshots should be the same for every creation of a new archive to ensure fast operation. This is because the file cache that is used to determine changed files quickly uses absolute filenames. If this is not possible, consider creating a bind mount to a stable location.

The --progress option shows (from left to right) Original, Compressed and Deduplicated (O, C and D, respectively), then the Number of files (N) processed so far, followed by the currently processed path.

When using --stats, you will get some statistics about how much data was added - the "This Archive" deduplicated size there is most interesting as that is how much your repository will grow. Please note that the "All archives" stats refer to the state after creation. Also, the --stats and --dry-run options are mutually exclusive because the data is not actually compressed and deduplicated during a dry run.

See the output of the "borg help patterns" command for more help on exclude patterns. See the output of the "borg help placeholders" command for more help on placeholders.


See borg-common(1) for common options of Borg commands.


name of archive to create (must be also a valid directory name)
paths to archive

optional arguments

-n, --dry-run
do not create a backup archive
-s, --stats
print statistics for the created archive
output verbose list of items (files, dirs, ...)
only display items with the given status characters (see description)
output stats as JSON. Implies --stats.
experimental: do not synchronize the cache. Implies not using the files cache.
do not load/update the file metadata cache used to detect unchanged files
--stdin-name NAME
use NAME in archive for stdin data (default: "stdin")

Exclusion options

-e PATTERN, --exclude PATTERN
exclude paths matching PATTERN
--exclude-from EXCLUDEFILE
read exclude patterns from EXCLUDEFILE, one per line
--pattern PATTERN
experimental: include/exclude paths matching PATTERN
--patterns-from PATTERNFILE
experimental: read include/exclude patterns from PATTERNFILE, one per line
exclude directories that contain a CACHEDIR.TAG file (
--exclude-if-present NAME
exclude directories that are tagged by containing a filesystem object with the given NAME
--keep-exclude-tags, --keep-tag-files
if tag objects are specified with --exclude-if-present, don't omit the tag objects themselves from the backup archive
exclude files flagged NODUMP

Filesystem options

-x, --one-file-system
stay in the same file system and do not store mount points of other file systems
only store numeric user and group identifiers
do not store atime into archive
do not store ctime into archive
do not store birthtime (creation date) into archive
do not read and store bsdflags (e.g. NODUMP, IMMUTABLE) into archive
ignore inode data in the file metadata cache used to detect unchanged files.
--files-cache MODE
operate files cache in MODE. default: ctime,size,inode
open and read block and char device files as well as FIFOs as if they were regular files. Also follows symlinks pointing to these kinds of files.

Archive options

--comment COMMENT
add a comment text to the archive
--timestamp TIMESTAMP
manually specify the archive creation date/time (UTC, yyyy-mm-ddThh:mm:ss format). Alternatively, give a reference file/directory.
-c SECONDS, --checkpoint-interval SECONDS
write checkpoint every SECONDS seconds (Default: 1800)
--chunker-params PARAMS
specify the chunker parameters (CHUNK_MIN_EXP, CHUNK_MAX_EXP, HASH_MASK_BITS, HASH_WINDOW_SIZE). default: 19,23,21,4095
select compression algorithm, see the output of the "borg help compression" command for details.


# Backup ~/Documents into an archive named "my-documents"
$ borg create /path/to/repo::my-documents ~/Documents
# same, but list all files as we process them
$ borg create --list /path/to/repo::my-documents ~/Documents
# Backup ~/Documents and ~/src but exclude pyc files
$ borg create /path/to/repo::my-files \
    ~/Documents                       \
    ~/src                             \
    --exclude '*.pyc'
# Backup home directories excluding image thumbnails (i.e. only
# /home/<one directory>/.thumbnails is excluded, not /home/*/*/.thumbnails etc.)
$ borg create /path/to/repo::my-files /home \
    --exclude 'sh:/home/*/.thumbnails'
# Backup the root filesystem into an archive named "root-YYYY-MM-DD"
# use zlib compression (good, but slow) - default is lz4 (fast, low compression ratio)
$ borg create -C zlib,6 --one-file-system /path/to/repo::root-{now:%Y-%m-%d} /
# Backup a remote host locally ("pull" style) using sshfs
$ mkdir sshfs-mount
$ sshfs sshfs-mount
$ cd sshfs-mount
$ borg create /path/to/{now:%Y-%m-%d} .
$ cd ..
$ fusermount -u sshfs-mount
# Make a big effort in fine granular deduplication (big chunk management
# overhead, needs a lot of RAM and disk space, see formula in internals
# docs - same parameters as borg < 1.0 or attic):
$ borg create --chunker-params 10,23,16,4095 /path/to/repo::small /smallstuff
# Backup a raw device (must not be active/in use/mounted at that time)
$ dd if=/dev/sdx bs=10M | borg create /path/to/repo::my-sdx -
# No compression (none)
$ borg create --compression none /path/to/repo::arch ~
# Super fast, low compression (lz4, default)
$ borg create /path/to/repo::arch ~
# Less fast, higher compression (zlib, N = 0..9)
$ borg create --compression zlib,N /path/to/repo::arch ~
# Even slower, even higher compression (lzma, N = 0..9)
$ borg create --compression lzma,N /path/to/repo::arch ~
# Only compress compressible data with lzma,N (N = 0..9)
$ borg create --compression auto,lzma,N /path/to/repo::arch ~
# Use short hostname, user name and current time in archive name
$ borg create /path/to/repo::{hostname}-{user}-{now} ~
# Similar, use the same datetime format as borg 1.1 will have as default
$ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S} ~
# As above, but add nanoseconds
$ borg create /path/to/repo::{hostname}-{user}-{now:%Y-%m-%dT%H:%M:%S.%f} ~
# Backing up relative paths by moving into the correct directory first
$ cd /home/user/Documents
# The root directory of the archive will be "projectA"
$ borg create /path/to/repo::daily-projectA-{now:%Y-%m-%d} projectA


The --exclude patterns are not like tar. In tar --exclude .bundler/gems will exclude foo/.bundler/gems. In borg it will not, you need to use --exclude '*/.bundler/gems' to get the same effect. See borg help patterns for more information.

In addition to using --exclude patterns, it is possible to use --exclude-if-present to specify the name of a filesystem object (e.g. a file or folder name) which, when contained within another folder, will prevent the containing folder from being backed up. By default, the containing folder and all of its contents will be omitted from the backup. If, however, you wish to only include the objects specified by --exclude-if-present in your backup, and not include any other contents of the containing folder, this can be enabled through using the --keep-exclude-tags option.

Item flags

--list outputs a list of all files, directories and other file system items it considered (no matter whether they had content changes or not). For each item, it prefixes a single-letter flag that indicates type and/or status of the item.

If you are interested only in a subset of that output, you can give e.g. --filter=AME and it will only show regular files with A, M or E status (see below).

A uppercase character represents the status of a regular file relative to the "files" cache (not relative to the repo -- this is an issue if the files cache is not used). Metadata is stored in any case and for 'A' and 'M' also new data chunks are stored. For 'U' all data chunks refer to already existing chunks.

  • 'A' = regular file, added (see also a_status_oddity in the FAQ)
  • 'M' = regular file, modified
  • 'U' = regular file, unchanged
  • 'E' = regular file, an error happened while accessing/reading this file

A lowercase character means a file type other than a regular file, borg usually just stores their metadata:

  • 'd' = directory
  • 'b' = block device
  • 'c' = char device
  • 'h' = regular file, hardlink (to already seen inodes)
  • 's' = symlink
  • 'f' = fifo

Other flags used include:

  • 'i' = backup data was read from standard input (stdin)
  • '-' = dry run, item was not backed up
  • 'x' = excluded, item was not backed up
  • '?' = missing status code (if you see this, please file a bug report!)


borg-common(1), borg-delete(1), borg-prune(1), borg-check(1), borg-patterns(1), borg-placeholders(1), borg-compression(1)


The Borg Collective