Scroll to navigation

HCITOOL(1) Linux System Administration HCITOOL(1)

NAME

hcitool - configure Bluetooth connections

SYNOPSIS

hcitool [-h]
hcitool [-i <hciX>] [command [command parameters]]

DESCRIPTION

hcitool is used to configure Bluetooth connections and send some special command to Bluetooth devices. If no command is given, or if the option -h is used, hcitool prints some usage information and exits.

OPTIONS

-h
Gives a list of possible commands
-i <hciX>
The command is applied to device hciX , which must be the name of an installed Bluetooth device. If not specified, the command will be sent to the first available Bluetooth device.

COMMANDS

dev
Display local devices
inq
Inquire remote devices. For each discovered device, Bluetooth device address, clock offset and class are printed.
scan
Inquire remote devices. For each discovered device, device name are printed.
name <bdaddr>
Print device name of remote device with Bluetooth address bdaddr.
info <bdaddr>
Print device name, version and supported features of remote device with Bluetooth address bdaddr.
spinq
Start periodic inquiry process. No inquiry results are printed.
epinq
Exit periodic inquiry process.
cmd <ogf> <ocf> [parameters]
Submit an arbitrary HCI command to local device. ogf, ocf and parameters are hexadecimal bytes.
con
Display active baseband connections
cc [--role=m|s] [--pkt-type=<ptype>] <bdaddr>
Create baseband connection to remote device with Bluetooth address bdaddr. Option --pkt-type specifies a list of allowed packet types. <ptype> is a comma-separated list of packet types, where the possible packet types are DM1, DM3, DM5, DH1, DH3, DH5, HV1, HV2, HV3. Default is to allow all packet types. Option --role can have value m (do not allow role switch, stay master) or s (allow role switch, become slave if the peer asks to become master). Default is m.
dc <bdaddr> [reason]
Delete baseband connection from remote device with Bluetooth address bdaddr. The reason can be one of the Bluetooth HCI error codes. Default is 19 for user ended connections. The value must be given in decimal.
sr <bdaddr> <role>
Switch role for the baseband connection from the remote device to master or slave.
cpt <bdaddr> <packet types>
Change packet types for baseband connection to device with Bluetooth address bdaddr. packet types is a comma-separated list of packet types, where the possible packet types are DM1, DM3, DM5, DH1, DH3, DH5, HV1, HV2, HV3.
rssi <bdaddr>
Display received signal strength information for the connection to the device with Bluetooth address bdaddr.
lq <bdaddr>
Display link quality for the connection to the device with Bluetooth address bdaddr.
tpl <bdaddr> [type]
Display transmit power level for the connection to the device with Bluetooth address bdaddr. The type can be 0 for the current transmit power level (which is default) or 1 for the maximum transmit power level.
afh <bdaddr>
Display AFH channel map for the connection to the device with Bluetooth address bdaddr.
lp <bdaddr> [value]
With no value, displays link policy settings for the connection to the device with Bluetooth address bdaddr. If value is given, sets the link policy settings for that connection to value. Possible values are RSWITCH, HOLD, SNIFF and PARK.
lst <bdaddr> [value]
With no value, displays link supervision timeout for the connection to the device with Bluetooth address bdaddr. If value is given, sets the link supervision timeout for that connection to value slots, or to infinite if value is 0.
auth <bdaddr>
Request authentication for the device with Bluetooth address bdaddr.
enc <bdaddr> [encrypt enable]
Enable or disable the encryption for the device with Bluetooth address bdaddr.
key <bdaddr>
Change the connection link key for the device with Bluetooth address bdaddr.
clkoff <bdaddr>
Read the clock offset for the device with Bluetooth address bdaddr.
clock [bdaddr] [which clock]
Read the clock for the device with Bluetooth address bdaddr. The clock can be 0 for the local clock or 1 for the piconet clock (which is default).
lescan [--privacy] [--passive] [--whitelist] [--discovery=g|l] [--duplicates]
Start LE scan
leinfo [--static] [--random] <bdaddr>
Get LE remote information
lewladd [--random] <bdaddr>
Add device to LE White List
lewlrm <bdaddr>
Remove device from LE White List
lewlsz
Read size of LE White List
lewlclr
Clear LE White List
lerladd [--local irk] [--peer irk] [--random] <bdaddr>
Add device to LE Resolving List
lerlrm <bdaddr>
Remove device from LE Resolving List
lerlclr
Clear LE Resolving List
lerlsz
Read size of LE Resolving List
lerlon
Enable LE Address Resolution
lerloff
Disable LE Address Resolution
lecc [--static] [--random] <bdaddr> | [--whitelist]
Create a LE Connection
ledc <handle> [reason]
Disconnect a LE Connection
lecup <handle> <min> <max> <latency> <timeout>
LE Connection Update

AUTHORS

Written by Maxim Krasnyansky <maxk@qualcomm.com> and Marcel Holtmann <marcel@holtmann.org>

man page by Fabrizio Gennari <fabrizio.gennari@philips.com>

Nov 12 2002 BlueZ