.TH ATARI800 1 "2018-04-21" "Atari800 4.0.0" .SH NAME atari800 \- emulator of Atari 8-bit computers and the 5200 console .SH SYNOPSIS .B atari800 .RI [ option "]... [" file ]... .SH DESCRIPTION .B atari800 emulates the Atari 8-bit computer systems including the 400, 800, 1200XL, 600XL, 800XL, 65XE, 130XE, 800XE and the XE Game System, and also the Atari 5200 SuperSystem console. .SH OPTIONS .TP .B \-help Print complete and up-to-date list of command line switches .TP .B \-v Print emulator version .TP .B \-verbose Display framerate when exiting .TP .BI \-config\ filename Specify an alternative configuration filename .TP .B \-autosave\-config Automatically save the current configuration on emulator exit. .TP .B \-no\-autosave\-config Don't save the current configuration on emulator exit (the default). .TP .BI \-osa_rom\ filename Path to file containing Atari Rev.A Operating System. .TP .BI \-osb_rom\ filename Path to file containing Atari Rev.B Operating System. .TP .BI \-xlxe_rom\ filename Path to file containing Atari XL/XE Operating System. .TP .BI \-5200_rom\ filename Path to file containing Atari 5200 Games System ROM. .TP .BI \-basic_rom\ filename Path to file containing Atari BASIC ROM. Used to override paths defined at compile time. .TP \fB\-800\-rev auto\fR|\fBa\-ntsc\fR|\fBa\-pal\fR|\fBb\-ntsc\fR|\fBcustom\fR Select operating system revision for Atari 800: .PP .RS .PD 0 .TP .B auto The default. Use the most appropriate from the available ones. .TP .B a\-ntsc Use OS rev. A NTSC from early NTSC 400/800 units. .TP .B a\-pal Use OS rev. A PAL from PAL 400/800 units. .TP .B a\-pal Use OS rev. B NTSC from late NTSC 400/800 units. .TP .B custom Use a custom OS. .PD .RE .TP \fB\-xl\-rev auto\fR|\fB10\fR|\fB11\fR|\fB1\fR|\fB2\fR|\fB3a\fR|\fB3b\fR|\fB5\fR|\fB3\fR|\fB4\fR|\fB59\fR|\fB59a\fR|\fBcustom\fR Select operating system revision for Atari XL/XE: .PP .RS .PD 0 .TP .B auto The default. Use the most appropriate from the available ones. .TP .B 10 Use OS AA000000 rev. 10 from early 1200XL units. .TP .B 11 Use OS AA000001 rev. 11 from late 1200XL units. .TP .B 1 Use OS BB000000 rev. 1 from the 600XL. .TP .B 2 Use OS BB000001 rev. 2 from the 800XL and early 65XE/130XE units. .TP .B 3a Use prototype OS BB000002 rev. 3 from 1400XL/1450XLD units (also known as 1540OS3.V0 and 1450R3V0.ROM). .TP .B 3b Use prototype OS BB000002 rev. 3 ver. 4 from 1400XL/1450XLD units (also known as os1450.128 and 1450R3VX.ROM). .TP .B 5 Use prototype OS CC000001 rev. 4 (also known as Rev. 5), for which sources are available at . .TP .B 3 Use OS BB000001 rev. 3 from late 65XE/130XE units. .TP .B 4 Use OS BB000001 rev. 4 from the XEGS. .TP .B 59 Use OS BB000001 rev. 59 from the Arabic 65XE. .TP .B 59a Use OS BB000001 rev. 59 from Kevin Savetz' Arabic 65XE: . .TP .B custom Use a custom OS. .PD .RE .TP \fB\-5200\-rev auto\fR|\fBorig\fR|\fBa\fR|\fBcustom\fR Select BIOS revision for Atari 5200: .PP .RS .PD 0 .TP .B auto The default. Use the most appropriate from the available ones. .TP .B orig Use BIOS from 4-port and early 2\-port 5200 units. .TP .B a Use BIOS rev. A from late 2\-port 5200 units. .TP .B custom Use a custom BIOS. .PD .RE .TP \fB\-basic\-rev auto\fR|\fBa\fR|\fBb\fR|\fBc\fR|\fBcustom\fR Select BASIC revision: .PP .RS .PD 0 .TP .B auto The default. Use the most appropriate from the available ones. .TP .B a Use BASIC rev. A. .TP .B b Use BASIC rev. B from early 600XL/800XL units. .TP .B c Use BASIC rev. C from late 600XL/800XL and all XE units. .TP .B custom Use a custom BASIC. .PD .RE .TP \fB\-xegame\-rev auto\fR|\fBorig\fR|\fBcustom\fR Select XEGS builtin game version: .PP .RS .PD 0 .TP .B auto The default. Use the most appropriate from the available ones. .TP .B orig Use the original Missile Command game. .TP .B custom Use a custom game ROM. .PD .RE .TP .B \-atari Emulate Atari 400/800 .TP .B \-1200 Emulate Atari 1200XL .TP .B \-xl Emulate Atari 800XL .TP .B \-xe Emulate Atari 130XE .TP .B \-320xe Emulate Atari 320XE (Compy-Shop) .TP .B \-rambo Emulate Atari 320XE (Rambo) .TP .B \-xegs Emulate Atari XEGS .TP .B \-5200 Emulate Atari 5200 .TP .B \-emuos Use EmuOS .TP .B \-c Enable RAM between 0xc000 and 0xcfff in Atari 800 .TP .BI \-axlon\ n Use Atari 800 Axlon memory expansion: \fIn\fR k total RAM .TP .B \-axlon0f Use Axlon shadow at 0x0fc0-0x0fff .TP .BI \-mosaic\ n Use 400/800 Mosaic memory expansion: \fIn\fR k total RAM .TP .B \-mapram Enable the MapRAM memory expansion. Works only when emulating an Atari XL/XE machine. .TP .B \-no-mapram Disable the MapRAM memory expansion. .TP .B \-pal Emulate PAL TV mode .TP .B \-ntsc Emulate NTSC TV mode .TP .B \-nobasic Used to disable Basic when starting the emulator in XL/XE mode. Simulates the Option key being held down during system boot. .TP .B \-basic Turn on Atari BASIC ROM .TP .BI \-cart\ filename Insert cartridge (CART or raw format) .TP .BR "\-cart\-type 0" .. 70 Select type of the cartridge inserted with the \fB\-cart\fR option. When inserting a raw ROM image its type cannot be detected automaticcaly, and must be provided with this option. Setting to \fB0\fR means disabling the cartridge, and any other number indicates a specific cartridge type: .RS .PD 0 .TP .B 1 Standard 8 KB cartridge .TP .B 2 Standard 16 KB cartridge .TP .B 3 OSS two chip 16 KB cartridge (034M) .TP .B 4 Standard 32 KB 5200 cartridge .TP .B 5 DB 32 KB cartridge .TP .B 6 Two chip 16 KB 5200 cartridge .TP .B 7 Bounty Bob Strikes Back 40 KB 5200 cartridge .TP .B 8 64 KB Williams cartridge .TP .B 9 Express 64 KB cartridge .TP .B 10 Diamond 64 KB cartridge .TP .B 11 SpartaDos X 64 KB cartridge .TP .B 12 XEGS 32 KB cartridge .TP .B 13 XEGS 64 KB cartridge (banks 0-7) .TP .B 14 XEGS 128 KB cartridge .TP .B 15 OSS one chip 16 KB cartridge .TP .B 16 One chip 16 KB 5200 cartridge .TP .B 17 Decoded Atrax 128 KB cartridge .TP .B 18 Bounty Bob Strikes Back 40 KB cartridge .TP .B 19 Standard 8 KB 5200 cartridge .TP .B 20 Standard 4 KB 5200 cartridge .TP .B 21 Right slot 8 KB cartridge .TP .B 22 32 KB Williams cartridge .TP .B 23 XEGS 256 KB cartridge .TP .B 24 XEGS 512 KB cartridge .TP .B 25 XEGS 1 MB cartridge .TP .B 26 MegaCart 16 KB cartridge .TP .B 27 MegaCart 32 KB cartridge .TP .B 28 MegaCart 64 KB cartridge .TP .B 29 MegaCart 128 KB cartridge .TP .B 30 MegaCart 256 KB cartridge .TP .B 31 MegaCart 512 KB cartridge .TP .B 32 MegaCart 1 MB cartridge .TP .B 33 Switchable XEGS 32 KB cartridge .TP .B 34 Switchable XEGS 64 KB cartridge .TP .B 35 Switchable XEGS 128 KB cartridge .TP .B 36 Switchable XEGS 256 KB cartridge .TP .B 37 Switchable XEGS 512 KB cartridge .TP .B 38 Switchable XEGS 1 MB cartridge .TP .B 39 Phoenix 8 KB cartridge .TP .B 40 Blizzard 16 KB cartridge .TP .B 41 Atarimax 128 KB Flash cartridge .TP .B 42 Atarimax 1 MB Flash cartridge .TP .B 43 SpartaDos X 128 KB cartridge .TP .B 44 OSS 8 KB cartridge .TP .B 45 OSS two chip 16 KB cartridge (043M) .TP .B 46 Blizzard 4 KB cartridge .TP .B 47 AST 32 KB cartridge .TP .B 48 Atrax SDX 64 KB cartridge .TP .B 49 Atrax SDX 128 KB cartridge .TP .B 50 Turbosoft 64 KB cartridge .TP .B 51 Turbosoft 128 KB cartridge .TP .B 52 Ultracart 32 KB cartridge .TP .B 53 Low bank 8 KB cartridge .TP .B 54 SIC! 128 KB cartridge .TP .B 55 SIC! 256 KB cartridge .TP .B 56 SIC! 512 KB cartridge .TP .B 57 Standard 2 KB cartridge .TP .B 58 Standard 4 KB cartridge .TP .B 59 Right slot 4 KB cartridge .TP .B 60 Blizzard 32 KB cartridge .TP .B 61 MegaMax 2 MB cartridge .TP .B 62 The!Cart 128 MB cartridge .TP .B 63 Flash MegaCart 4 MB cartridge .TP .B 64 MegaCart 2 MB cartridge .TP .B 65 The!Cart 32 MB cartridge .TP .B 66 The!Cart 64 MB cartridge .TP .B 67 XEGS 64 KB cartridge (banks 8-15) .TP .B 68 Atrax 128 KB cartridge .TP .B 69 aDawliah 32 KB cartridge .TP .B 70 aDawliah 64 KB cartridge .PD .RE If this option is not given, the user will be asked to choose the cartridge type when the emulator starts. .TP .BI \-cart2\ filename Insert piggyback cartridge (CART or raw format). This works only if the first cartridge is a pass-through (currently only SpartaDOS X 64KB and 128KB types). .TP .BR "\-cart2\-type 0" .. 70 Select type of the cartridge inserted with the \fB-cart2\fR option. When inserting a raw ROM image its type cannot be detected automatically, and must be provided with this option. The available values are the same as for the \fB\-cart\-type\fR option above. .TP .B \-cart\-autoreboot Automatically reboot after cartridge inserting/removing (this is the default setting). This does not apply to the piggyback cartridge - inserting or removing it never causes automatic reboot. .TP .B \-no\-cart\-autoreboot Disable automatic reboot after cartridge inserting/removing. .TP .BI \-run\ filename Run Atari program (EXE, COM, XEX, BAS, LST) .TP .BI \-state\ filename Load saved-state file .TP .BI \-tape\ filename Attach cassette image (CAS format or raw file) .TP .BI \-boottape\ filename Attach cassette image and boot it .TP .B \-tape\-readonly Set the attached cassette image as read-only. .TP .B \-1400 Emulate the Atari 1400XL .TP .B \-xld Emulate the Atari 1450XLD .TP .B \-bb Emulate the CSS Black Box .TP .B \-mio Emulate the ICD MIO board .TP .B \-nopatch Normally the OS is patched giving very fast I/O. This options prevents the patch from being applied so that the OS accesses the serial port hardware directly. This option will probably never be needed since programs that access the serial hardware should work even if the OS has been patched. .TP .B \-nopatchall Don't patch OS at all, H:, P: and R: devices won't work .TP .BI \-H1\ path Set path for H1: device .TP .BI \-H2\ path Set path for H2: device .TP .BI \-H3\ path Set path for H3: device .TP .BI \-H4\ path Set path for H4: device .TP .BI \-Hpath\ path Set path for Atari executables on the H: device .TP .B \-hreadonly Enable read-only mode for H: device .TP .B \-hreadwrite Disable read-only mode for H: device .TP .B \-devbug Put debugging messages for H: and P: devices in log file .TP .B \-rtime Enable R-Time 8 emulation .TP .B \-nortime Disable R-Time 8 emulation .TP \fB\-rdevice\fR [\fIdev\fR] Enable R: device. If \fIdev\fR is specified then it's used as host serial device name (e.g. \fI/dev/ttyS0\fR on linux). If there is no \fIdev\fR specified then R: is directed to network. .TP .B \-mouse off Do not use mouse .TP .B \-mouse pad Emulate paddles .TP .B \-mouse touch Emulate Atari Touch Tablet .TP .B \-mouse koala Emulate Koala Pad .TP .B \-mouse pen Emulate Light Pen .TP .B \-mouse gun Emulate Light Gun .TP .B \-mouse amiga Emulate Amiga mouse .TP .B \-mouse st Emulate Atari ST mouse .TP .B \-mouse trak Emulate Atari Trak-Ball .TP .B \-mouse joy Emulate joystick using mouse .TP .BI \-mouseport\ num Set mouse port 1-4 (default 1) .TP .BI \-mousespeed\ num Set mouse speed 1-9 (default 3) .TP .B \-multijoy Emulate MultiJoy4 interface .TP .B \-directmouse Use mouse's absolute position .TP .BI \-cx85\ num Emulate CX85 numeric keypad on port \fInum\fR .TP .B \-grabmouse SDL only, prevent mouse pointer from leaving the window .TP .BI \-record\ filename Record all input events to \fIfilename\fR. Can be used for gaming contests (highest score etc). .TP .BI \-playback\ filename Playback input events from \fIfilename\fR. Watch an expert play the game. .TP .B \-refresh Controls screen refresh rate. A numerical value follows this option which specifies how many emulated screen updates are required before the actual screen is updated. This value effects the speed of the emulation: A higher value results in faster CPU emulation but a less frequently updated screen. .TP \fB\-ntsc\-artif \fImode\fR, \fB\-pal\-artif \fImode\fR Set emulation mode of video artifacts in NTSC or PAL, respectively. The available values for \fImode\fR are: .RS .PD 0 .TP .B none Disable video artifacts. .TP .B ntsc-old Simple emulation of NTSC composite video artifacts. Fast but inaccurate. .TP .B ntsc-new Improved emulation of NTSC artifacts. May look better than \fBntsc\-old\fR. .TP .B ntsc-full Full emulation of NTSC artifacts. Rather slow and available only in 16- and 32-bit video modes. .TP .B pal-simple Simple emulation of PAL chroma blending, without composite artifacts. Fast but inaccurate. .TP .B pal-blend Accurate emulation of PAL chroma blending, without composite artifacts. Available only in 16- and 32-bit video modes. .PD .RE .TP .BI \-artif\ mode Set artifacting mode 0-4 (0 = disable). Only for tv effects \fBntsc\-old\fR and \fBntsc\-new\fR. .TP .BR "\-colors\-preset standard" | "deep\-black" | vibrant Use one of predefined colour adjustments .TP .BI \-saturation\ n Set screen color saturation (like TV Colour control) .TP \fB\-ntsc\-saturation \fIn\fR, \fB\-pal\-saturation \fIn\fR Set saturation only for NTSC or PAL, respectively .TP .BI \-contrast\ n Set screen contrast (also called white level) .TP \fB\-ntsc\-contrast \fIn\fR, \fB\-pal\-contrast \-fIn\fR Set contrast only for NTSC or PAL, respectively .TP .BI \-brightness\ n Set screen brightness (also called black level) .TP \fB\-ntsc\-brightness \fIn\fR, \fB\-pal\-brightness \fIn\fR Set brightness only for NTSC or PAL, respectively .TP .BI \-gamma\ n Set screen gamma correction .TP \fB\-ntsc\-gamma \fIn\fR, \fB\-pal\-gamma \fIn\fR Set gamma adjustment only for NTSC or PAL, respectively .TP .BI \-tint\ n Set tint -1..1. .TP \fB\-ntsc\-tint \fIn\fR, \fB\-pal\-tint \fIn\fR Set tint only for NTSC or PAL, respectively .TP .BI \-ntsc-colordelay\ n Set GTIA color delay for NTSC system. This emulates adjusting the potentiometer existing at the bottom of Atari computers, which adjusts hues of colors produced by the computer. .TP .BI \-pal\-colordelay\ n Set GTIA color delay for PAL system. .TP \fB\-paletten \fIfilename\fR, \fB\-palettep \fIfilename\fR Read Atari NTSC/PAL colors from ACT file .TP .BR \-paletten\-adjust ,\ \-palettep\-adjust Apply colour adjustments (brightness, contrast etc.) to the loaded NTSC/PAL palette (by default the loaded palette is displayed unmodified). .TP .BI \-screenshots\ pattern Set filename pattern for screenshots. Use to override the default \fIatari000.png\fR, \fIatari001.png\fR etc. filenames. Hashes are replaced with raising numbers. Existing files are overwritten only if all the files defined by the pattern exist. .TP .B \-showspeed Show percentage of actual speed .TP .B \-sound Enable sound .TP .B \-nosound Disable sound .TP .BI \-dsprate\ freq Set sound output frequency in Hz. The default is 44100 Hz. .TP .B \-audio16 Set sound output format to 16-bit .TP .B \-audio8 Set sound output format to 8-bit .TP .BI \-snd\-buflen\ ms Set length of the hardware sound buffer in milliseconds. Setting to 0 (the default) causes the length to be set automatically. Higher values increase sound latency. Automatic setting should be OK in most cases. .TP .BI \-snddelay\ ms Set sound latency in milliseconds. Increase it if you experience gaps of silence during sound playback. .SS Curses Options .TP .B \-left Use columns 0 to 39 .TP .B \-central Use columns 20 to 59 .TP .B \-right Use columns 40 to 79 .TP .B \-wide1 Use columns 0 to 79. In this mode only the even character positions are used. The odd locations are filled with spaces. .TP .B \-wide2 Use columns 0 to 79. This mode is similar to \fB-wide1\fP except that the spaces are in reverse video if the previous character was also in reverse video. .SS Falcon Options .TP .BI \-interlace\ x Generate Falcon screen only every \fIx\fR frame .TP .B \-videl Direct VIDEL programming (Falcon/VGA only) .TP .B \-double Double the screen size on NOVA .TP .B \-delta Delta screen output (differences only) .TP .B \-joyswap Swap joysticks .SS Java NestedVM Options .TP .BI \-scale\ n Scale width and height by \fIn\fR .SS SDL Options .TP .B \-fullscreen Start in fullscreen mode. The default resolution is 336x240 and can be later changed. .TP .B \-windowed Start in a window (the default). .TP .B \-rotate90 Rotate display (useful for devices with 240x320 screen). .TP .B \-no\-rotate90 Don't rotate display (the default). .TP .BI \-fs\-width\ number\-of\-pixels Host horizontal resolution for fullscreen. .TP .BI \-fs\-height\ number\-of\-pixels Host vertical resolution for fullscreen. .TP .BI \-win\-width\ number\-of\-pixels Set horizontal size of the window. The window can be later resized manually. .TP .BI \-win\-height\ number\-of\-pixels Set vertical size of the window. The window can be later resized nanually. .TP .BI \-bpp\ number\-of\-bits Sets image color depth when OpenGL acceleration is disabled. Accepted values are: \fB0\fR (use desktop depth; this is the default), \fB8\fR, \fB16\fR and \fB32\fR. Depending on the type of graphics hardware, the fullscreen setting and current desktop bit depth, either of the values might give the best performance. Note that with bit depth set to 16 emulation of colors is slightly less accurate. .TP .B \-vsync Synchronize the display with the monitor's vertical retrace, to remove image tearing artifacts. This improves display quality, but may be not available depending on the current wideo mode (fullscreen/windowed), the chosen \fBSDL_VIDEODRIVER\fR and type of graphics hardware. Synchronization is available for some SDL videodrivers (directx, dga) but not for others. In OpenGL this option has no effect - vertical synchronization must be instead enabled in the video hardware driver's settings, if available. .TP .B \-no\-vsync Disable synchronization with monitor's vertical retrace (the default). .TP \fB\-horiz\-area narrow\fR|\fBtv\fR|\fBfull\fR|\fInumber\fR Set amount of visible screen horizontally: .PP .RS .PD 0 .TP .B narrow Shows 320 pixels. .TP .B tv The default. Shows area visible on a standard TV (336 pixels). .TP .B full Shows full overscan area (384 pixels). .TP .I number An exact horizontal size can be set by providing a \fInumber\fR between 160 and 384. .PD .RE .TP \fB\-vertical\-area short\fR|\fBtv\fR|\fBfull\fR|\fInumber\fR Set amount of visible screen vertically: .PP .RS .PD 0 .TP .B short Shows 200 pixels. .TP .B tv The default. Shows area visible on a typical TV (224 or 240 pixels, depending on current TV system). .TP .B full Shows full overscan area, which can be up to 300 pixels in case of the XEP80. .TP .I number An exact number of visible scanlines can be set by providing a \fInumber\fR between 100 and 300. .PD .RE .PP Note that when displaying output of an XEP80 or Austin Franklin 80 column card, the \fBtv\fR setting will crop the top and bottom parts of text area, just like a real TV does - in such case setting the option to \fBfull\fR would be more appriopriate. .TP .BI \-horiz\-shift\ number When the visible horizontal area is not set to \fBfull\fR, this option specifies the screen's area that will be visible. Values higher than 0 will cause showing more of the right side of the screen, while values lower than 0 will cause showing more of the left side. The default is 0 (no shift). .BI \-vert\-shift\ number Analogically to \fB-horiz-shift\fR: when the visible vertical area is not set to \fBfull\fR, this option specifies the screen's area that will be visible. Values higher than 0 will cause showing more of the bottom part of the screen, while values lower than 0 will cause showing more of the top part. The default is 0 (no shift). .TP \fB\-stretch none\fR|\fBintegral\fR|\fBfull\fR|\fInumber\fR Choose method of stretching the image to fit the screen/window area: .PP .RS .PD 0 .TP .B none The image won't be stretched at all. .TP .B integral The default. The image will fit the screen/window but will be stretched only by an integral multiplier. This setting allows for nice output when using scanlines in low screen resolutions. .TP .B full The screen will fit the entire screen/window area. This setting looks best in high screen resolutions. .TP .I number A custom multiplier (floating point number) can be also provided to precisely set the amount of stretching. .PD .RE .TP \fB\-fit\-screen width\fR|\fBheight\R|\fBboth\fR When \fB-stretch\fR is set to \fIintegral\fR or \fIfull\fR, this parameter controls how the stretching is performed with relation to window/screen size: .PP .RS .PD 0 .TP .B width Fits the image's width while allowing it to be cropped vertically. .TP .B height Fits the image's height while allowing it to be cropped horizontally. .TP .B both The default. Fit both the image's width and height, avoiding cropping. .PD .RE .TP \fB\-image\-aspect none\fR|\fBsquare\-pixels\fR|\fBreal\fR Choose how the image's aspect ratio should be maintained when stretching: .PP .RS .PD 0 .TP .B none Causes the image to be stretched without restriction to fit the screen/window area fully. .TP .B square\-pixels The default. Causes the image to be stretched by the same amount horizontally and vertically, maintaining square pixels. In low screen resolutions this setting may produce the nicest result. .TP .B real Recreates the aspect ratio of a real TV display (pixels are not square), but only if the \fB\-host\-aspect\-ratio\fR option is set correctly. .PD .RE .TP \fB\-host\-aspect\-ratio auto\fR|\fIx\fB:\fIy\fR Set the aspect ratio of the host monitor on which the emulator's display is placed. Allowed values are \fBauto\fR for autodetection, or ratios like \fB4:3\fR, \fB16:9\fR, \fB1.25:1\fR ... This value is used to properly maintain image's aspect ratio when having \fB\-image\-aspect\fR set to \fBreal\fR. The default value is \fBauto\fR. Note that host aspect ratio detection works as expected only if the desktop resolution matches aspect ratio of the display device (in other words, display pixels are square). If, for example, desktop resolution is 800x600 on a 16:9 monitor, autodetection will fail and host aspect ratio will have to be set manually, by measuring physical width and height of the monitor and setting the parameter to \fIwidth\fB:\fIheight\fR. .TP .B \-80column Shows output of an 80 column hardware, when it is available (the default). This parameter has effect only if an 80 column hardware is activated, using one of the parameters \fB\-af80\fR, \fB\-proto80\fR or \fB\-af80\fR. .TP .B \-no\-80column Deactivates showing output of an 80 column hardware. .TP .B \-nojoystick Do not initialize SDL joysticks .TP .BI \-joy0\ path\-to\-device Define path to device used in LPTjoy 0. Available on linux-ia32 only. .TP .BI \-joy1\ path\-to\-device Define path to device used in LPTjoy 1. Available on linux-ia32 only. .TP \fB\-ntsc\-filter\-preset composite\fR|\fBsvideo\fR|\fBrgb\fR|\fBmonochrome\fR Use one of predefined NTSC filter adjustments. .TP .BI \-ntsc\-sharpness\ n Set sharpness of the NTSC filter. .TP .BI \-ntsc\-resolution\ n Set resolution of the NTSC filter. .TP .BI \-ntsc\-artifacts\ n Set artifacts of the NTSC filter. .TP .BI \-ntsc\-fringing\ n Set fringing of the NTSC filter. .TP .BI \-ntsc\-bleed\ n Set bleed of the NTSC filter. .TP .BI \-ntsc\-burstphase\ n Set burst phase of the NTSC filter. This changes colors of artifacts. The best values are \fB0\fR, \fB0.5\fR, \fB1\fR, \fB1.5\fR. .TP .BI \-scanlines\ n Set visibility of scanlines (0..100). Scanlines are only visible when the screen's or window's vertical size is at least 480 (more precisely, at least twice the number of scanlines given in \fB\-vert\-area\fR). .TP .B \-scanlinesint Enable scanlines interpolation (looks nicer). .TP .B \-no\-scanlinesint Disable scanlines interpolation (in software modes may give better performance). .TP .B \-video\-accel Use OpenGL hardware acceleration for displaying and stretching of the emulator's display. Using OpenGL improves performance. .TP .B \-no\-video\-accel Don't use OpenGL hardware acceleration (the default). .TP \fB\-pixel\-format bgr16\fR|\fBrgb16\fR|\fBbgra32\fR|\fBargb32\fR Choose format of texture data when OpenGL acceleration is enabled. Depending on the type of the graphics hardware, either of the values might give the best performance. Note that with pixel format set to \fBbgr16\fR or \fBrgb16\fR, emulation of colors is slightly less accurate. .TP .B \-pbo Use Pixel Buffer Objects when OpenGL acceleration is enabled (the default). PBOs are available on newer graphics hardware and when used, substantially improve emulator's performance. However in rare cases (some Intel on-board chips) using PBOs may actually descrease perfromance. .TP .B \-no\-pbo Don't use Pixel Buffer Objects when OpenGL acceleration is used. .TP .B \-bilinear\-filter Enable bilinear filtering of the screen in OpenGL modes. .TP .B \-no\-bilinear\-filter Disable bilinear filtering in OpenGL modes (the default). .TP .BI \-opengl\-lib\ path Provide a custom OpenGL shared library. If not given, Atari800 will use a default system-specific library (typically \fIopengl32.dll\fR or \fIlibGL.so\fR). .TP .B \-proto80 Emulate a prototype 80 column board for the 1090 .TP .B \-xep80 Emulate the XEP80 .TP .BI \-xep80port\ n Use XEP80 on joystick port \fIn\fR .TP .B \-af80 Emulate the Austin Franklin 80 column daughterboard for Atari 800. .TP .B \-volume 0..100 Sets global volume of Atari 800. .SS X11 Options .TP .B \-small Run the emulator in a small window where each Atari 800 pixel is represented by one X Window pixel .TP .B \-large Runs the emulator in a large window where each Atari 800 pixel is represented by a 2x2 X Window rectangle. This mode is selected by default. .TP .B \-huge Runs the emulator in a huge window where each Atari 800 pixel is represented by a 3x3 X Window rectangle. .TP .BI \-clip_x\ number\-of\-pixels Set left offset for clipping .TP .BI \-clip_width\ number\-of\-pixels Set the width of the clipping-area .TP .BI \-clip_y\ number\-of\-pixels Set top offset for clipping .TP .BI \-clip_height\ number\-of\-pixels Set the height of the clipping-area .TP .B \-private_cmap Use private colormap .TP .B \-sio Show SIO monitor .TP .B \-x11bug Enable debug code in \fIatari_x11.c\fR .TP .B \-keypad Keypad mode .PD 0 .SH KEYBOARD, JOYSTICK AND OTHER CONTROLLERS .TP 22 .B F1 Built in user interface .TP .B F2 Option key .TP .B F3 Select key .TP .B F4 Start key .TP .B F5 Reset key ("warm reset") .TP .BR Shift + F5 Reboot ("cold reset") .TP .B F6 Help key (XL/XE only) .TP .B F7 Break key .TP .B F8 Enter monitor .TP .B F9 Exit emulator .TP .B F10 Save screenshot .TP .BR Shift + F10 Save interlaced screenshot .TP .BR Alt + R Run Atari program .TP .BR Alt + D Disk management .TP .BR Alt + C Cartridge management .TP .BR Alt + Y Select system .TP .BR Alt + O Sound settings .TP .BR Alt + W Sound recording start/stop .TP .BR Alt + S Save state file .TP .BR Alt + L Load state file .TP .BR Alt + A About the emulator .TP .B Insert Insert line (Atari Shift+'>') .TP .BR Ctrl + Insert Insert character (Atari Ctrl+'>') .TP .BR Shift + Ctrl + Insert Shift+Ctrl+'>' .TP .B Delete Delete line (Atari Shift+Backspace) .TP .BR Shift + Backspace Delete line (Atari Shift+Backspace) .TP .BR Ctrl + Delete Delete character (Atari Ctrl+Backspace) .TP .BR Ctrl + Backspace Delete character (Atari Ctrl+Backspace) .TP .BR Shift + Ctrl + Delete Shift+Ctrl+Backspace .TP .BR Shift + Ctrl + Backspace Shift+Ctrl+Backspace .TP .B Home Clear (Atari Shift+'<') .TP .BR Ctrl + Home Ctrl+'<' (also clears screen) .TP .BR Shift + Ctrl + Home Shift+Ctrl+'<' .TP .B ~ Inverse video .TP .B Up Up (Atari Ctrl+'-') .TP .B Down Down (Atari Ctrl+'=') .TP .B Left Left (Atari ctrl+'+') .TP .B Right Right (Atari ctrl+'*') .TP .BR Ctrl + Up - .TP .BR Ctrl + Down = .TP .BR Ctrl + Left + .TP .BR Ctrl + Right * .TP .BR Shift + Up _ (Atari Shift+'-') .TP .BR Shift + Down | (Atari Shift+'=') .TP .BR Shift + Left \ (Atari Shift+'+') .TP .BR Shift + Right ^ (Atari Shift+'*') .TP .BR Shift + Ctrl + Up Shift+Ctrl+- .TP .BR Shift + Ctrl + Down Shift+Ctrl+= .TP \fBCtrl\fR+\fB\\\fR Ctrl+Esc (Workaround for Windows) .TP \fBShift\fR+\fBCtrl\fR+\fB\\\fR Shift+Ctrl+Esc (Workaround for Windows) .SS CX85 Keypad (if enabled): .TP 25 .RB "host keypad " 0123456789- . 0123456789-. .TP .RB "host keypad " \/ NO .TP .RB "host keypad " Ctrl + / ESCAPE .TP .RB "host keypad " * DELETE .TP .RB "host keypad " + YES .TP .RB "host keypad " Enter +ENTER .PP Paddles, Atari touch tablet, Koala pad, light pen, light gun, ST/Amiga mouse, Atari trak-ball, joystick and Atari 5200 analog controller are emulated using mouse on ports that support it. See the options above for how to enable mouse. .SS Basic No function keys or \fBAlt\fR+\fIletter\fR shortcuts. Use \fBCtrl\fR+\fBC\fR to enter the monitor. Controllers not supported in this version. .SS Curses \fBF10\fR (Save screenshot) does not work in the default CURSES_BASIC build. \fBShift\fR+\fBF5\fR and \fBShift\fR+\fBF10\fR don't work at all. Avoid \fBCtrl\fR + \fBC\fR, \fBH\fR, \fBJ\fR, \fBM\fR, \fBQ\fR, \fBS\fR and \fBZ\fR. The remaining control characters can be typed. Control characters are displayed on the screen with the associated upper case character in bold. Controllers not supported in this version. .SS Falcon .TP .B Help Help key (XL/XE) .PP Joystick 0 is operated by the numeric keypad (make sure that the numeric keypad has been enabled). \fB7\fR \fB8\fR \fB9\fR \\|/ \fB4\fR \fB5\fR \fB6\fR /|\\ \fB1\fR \fB2\fR \fB3\fR And \fB0\fR is the fire key. Mouse not supported in this version. .SS SDL .TP 15 .B ` Atari/Inverse key .TP .B LSUPER Atari/Inverse key (unusable under Windows) .TP .B RSUPER CapsToggle (+Shift = CapsLock) .TP .BR LAlt + F Switch fullscreen/windowed display. .TP .BR LAlt + G Switch visible horizontal area. See \fB\-horiz\-area\fR. .TP .BR LAlt + J Swap \fBkeyboard_emulated\fP joysticks .TP .BR LAlt + M Grab mouse (prevents mouse pointer from leaving the window) .TP .BR LAlt + LShift + 1 Decrease tint (also called hue) .TP .BR LAlt + 1 Increase hue .TP .BR LAlt + LShift + 2 Decrease saturation (like TV Colour control) .TP .BR LAlt + 2 Increase saturation .TP .BR LAlt + LShift + 3 Decrease contrast (also called white level) .TP .BR LAlt + 3 Increase contrast .TP .BR LAlt + LShift + 4 Decrease brightness (also called black level) .TP .BR LAlt + 4 Increase brightness .TP .BR LAlt + LShift + 5 Decrease gamma adjustment .TP .BR LAlt + 5 Increase gamma adjustment .TP .BR LAlt + LShift + 6 Decrease color delay (Atari color adjustment potentiometer) .TP .BR LAlt + 6 Increase color delay .PP The following keys work only when the NTSC filter is enabled (\fB\-ntsc\-artif\fR set to \fBntsc\-full\fR): .RS .TP 15 .BR LAlt + LShift + 7 Decrease sharpness .TP .BR LAlt + 7 Increase sharpness .TP .BR LAlt + LShift + 8 Decrease resolution .TP .BR LAlt + 8 Increase resolution .TP .BR LAlt + LShift + 9 Decrease artifacts .TP .BR LAlt + 9 Increase artifacts .TP .BR LAlt + LShift + 0 Decrease fringing .TP .BR LAlt + 0 Increase fringing .TP .BR LAlt + LShift + - Decrease bleed .TP .BR LAlt + - Increase bleed .TP .BR LAlt + LShift + = Decrease NTSC burst phase (use this to change artifacting colours) .TP .BR LAlt + = Increase NTSC burst phase .RE .TP 15 .BR LAlt + LShift + [ Decrease scanlines visibility .TP .BR LAlt + [ Increase scanlines visibility .TP .BR LAlt + ] Toggle NTSC composite/S-Video/RGB/monochrome settings .TP .BR LAlt + Shift + X Enable/disable output of a 80 column hardware (use with \fB-xep80\fR, \fB-proto80\fR or \fB-af80\fR). .PP Apart from standard joysticks (handled by the SDL) up to two keyboard joysticks are supported. The keys used for joystick directions and the trigger can be freely defined in the config UI (Controller Config -> Define layout). Keyboard joystick emulation can be enabled/disabled in the Controller Config. By default, joy 0 is enabled and joy 1 is disabled (to not steal normal AWDS keys in the emulator). .SS X11 .TP .B Alt Atari key (either Alt key will work) .PP Joystick 0 is operated by the mouse position relative to the center of the screen. The mouse button acts as the trigger. On Linux, standard joysticks are also supported. .PD 1 .SH FILES .TP .I /usr/share/atari800/ATARIOSA.ROM Atari O/S A .TP .I /usr/share/atari800/ATARIOSB.ROM Atari O/S B .TP .I /usr/share/atari800/ATARIXL.ROM Atari 800XL O/S .TP .I /usr/share/atari800/ATARI5200.ROM Atari 5200 O/S .TP .I /usr/share/atari800/ATARIBAS.ROM Atari Basic .SH BUGS See the \fIBUGS\fR file.