.\" pxfw is released under the GNU GENERAL PUBLIC LICENSE. .TH "pxfw" "8" "26 Feb 2014" .SH "NAME" pxfw \- Firmware flashing tool for Plextor CD/DVD devices .SH "SYNOPSIS" \fBpxfw \-l .br \fBpxfw \-d DEVICE [\-if\fR firmware.bin\fB] [\-u] [\-f] [\-v]\fR .br \fBpxfw \-d DEVICE [\-e] [\-r] [\-t] [\-v]\fR .br .SH "DESCRIPTION" pxfw is the linux firmware flasher for Plextor CD and DVD drives. Remove any disks before flashing. .SH "FEATURES" You can flash the firmware of these drives: .br Plextor Premium, Premium-2, PX\-712, PX\-716, PX\-755 and PX\-760. .br .SH "DEVICE" can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features. \fBLinux:\fR .br .I /dev/hdX: IDE device .br .I /dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation .br .I /dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device .br \fBOpenBSD/NetBSD:\fR .br .I /dev/rcdX .br \fBFreeBSD:\fR .br .I /dev/cd: SCSI device .br .I /dev/acd: ATA device .br \fBMacOS X:\fR .br .I /dev/disk: .br \fBwin32:\fR .br .I C:,D:,E:, ... X:,Y:,Z: .br .SH "OPTIONS" \fB\-l\fR scan busses for all available CD and DVD devices .br \fB\-if\fR select inputfile. Specify the firmware binary file, which should .br be written to DEVICE. \fB\-u\fR proceed update. When the firmware checksum test has succeeded, .br write firmware to DEVICE. \fB\-f\fR force flashing. Even if DEVICE is not recognized, or firmware. .br checksum has failed, firmware writing will be forced. .br Handle with care. \fB\-e\fR read EEPROM from DEVICE. \fB\-r\fR reboot the device. \fB\-t\fR test which opcodes are supported by the device. \fB\-v\fR debug. .SH "EXAMPLES" \fBpxfw \-d /dev/hdc \-if 755_1.07.bin \-u\fR .br writes firmware file 755_1.07.bin into Master Drive on Secondary IDE\-Port. \fBpxfw \-d /dev/sr3 \-e \-oe file.foo\fR .br reades EEPROM from device /dev/sr3 and writes it to file.foo. \fR \fB \fR \fB \fR \fB \fRplease report man page improvements to T.Maguin@web.de\fB