Scroll to navigation

NDCTL-DESTROY-NAMESPACE(1) ndctl Manual NDCTL-DESTROY-NAMESPACE(1)

NAME

ndctl-destroy-namespace - destroy the given namespace(s)

SYNOPSIS

ndctl destroy-namespace <namespace> [<options>]

THEORY OF OPERATION

The capacity of an NVDIMM REGION (contiguous span of persistent memory) is accessed via one or more NAMESPACE devices. REGION is the Linux term for what ACPI and UEFI call a DIMM-interleave-set, or a system-physical-address-range that is striped (by the memory controller) across one or more memory modules.

The UEFI specification defines the NVDIMM Label Protocol as the combination of label area access methods and a data format for provisioning one or more NAMESPACE objects from a REGION. Note that label support is optional and if Linux does not detect the label capability it will automatically instantiate a "label-less" namespace per region. Examples of label-less namespaces are the ones created by the kernel’s memmap=ss!nn command line option (see the nvdimm wiki on kernel.org), or NVDIMMs without a valid namespace index in their label area.


Note

Label-less namespaces lack many of the features of their label-rich
cousins. For example, their size cannot be modified, or they cannot be fully destroyed (i.e. the space reclaimed). A destroy operation will zero any mode-specific metadata. Finally, for create-namespace operations on label-less namespaces, ndctl bypasses the region capacity availability checks, and always satisfies the request using the full region capacity. The only reconfiguration operation supported on a label-less namespace is changing its mode.

A namespace can be provisioned to operate in one of 4 modes, fsdax, devdax, sector, and raw. Here are the expected usage models for these modes:

•fsdax: Filesystem-DAX mode is the default mode of a namespace when specifying ndctl create-namespace with no options. It creates a block device (/dev/pmemX[.Y]) that supports the DAX capabilities of Linux filesystems (xfs and ext4 to date). DAX removes the page cache from the I/O path and allows mmap(2) to establish direct mappings to persistent memory media. The DAX capability enables workloads / working-sets that would exceed the capacity of the page cache to scale up to the capacity of persistent memory. Workloads that fit in page cache or perform bulk data transfers may not see benefit from DAX. When in doubt, pick this mode.

•devdax: Device-DAX mode enables similar mmap(2) DAX mapping capabilities as Filesystem-DAX. However, instead of a block-device that can support a DAX-enabled filesystem, this mode emits a single character device file (/dev/daxX.Y). Use this mode to assign persistent memory to a virtual-machine, register persistent memory for RDMA, or when gigantic mappings are needed.

•sector: Use this mode to host legacy filesystems that do not checksum metadata or applications that are not prepared for torn sectors after a crash. Expected usage for this mode is for small boot volumes. This mode is compatible with other operating systems.

•raw: Raw mode is effectively just a memory disk that does not support DAX. Typically this indicates a namespace that was created by tooling or another operating system that did not know how to create a Linux fsdax or devdax mode namespace. This mode is compatible with other operating systems, but again, does not support DAX operation.

OPTIONS

<namespace>
A namespaceX.Y device name. The keyword all can be specified to carry out the operation on every namespace in the system, optionally filtered by region (see --region=option)

-r, --region=

A regionX device name, or a region id number. Restrict the operation to the specified region(s). The keyword all can be specified to indicate the lack of any restriction, however this is the same as not supplying a --region option at all.

-b, --bus=

A bus id number, or a provider string (e.g. "ACPI.NFIT"). Restrict the operation to the specified bus(es). The keyword all can be specified to indicate the lack of any restriction, however this is the same as not supplying a --bus option at all.

-v, --verbose

Emit debug messages for the namespace operation

-f, --force

Unless this option is specified the destroy namespace operation will fail if the namespace is presently active. Specifying --force causes the namespace to be disabled before the operation is attempted. However, if the namespace is mounted then the disable namespace and destroy namespace operations will be aborted. The namespace must be unmounted before being destroyed.

COPYRIGHT

Copyright © 2016 - 2020, Intel Corporation. License GPLv2: GNU GPL version 2 <http://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.

SEE ALSO

ndctl-create-namespace(1)
2021-02-13 ndctl