.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.16.
.TH MBIMCLI "1" "January 2021" "mbimcli 1.24.6" "User Commands"
.SH NAME
mbimcli \- Control MBIM devices
.SH DESCRIPTION
.SS "Usage:"
.IP
lt\-mbimcli [OPTION?] \- Control MBIM devices
.SS "Help Options:"
.TP
\fB\-h\fR, \fB\-\-help\fR
Show help options
.TP
\fB\-\-help\-all\fR
Show all help options
.TP
\fB\-\-help\-basic\-connect\fR
Show Basic Connect Service options
.TP
\fB\-\-help\-phonebook\fR
Show Phonebook Service options
.TP
\fB\-\-help\-dss\fR
Show Device Service Stream options
.TP
\fB\-\-help\-ms\-firmware\-id\fR
Show Microsoft Firmware ID Service options
.TP
\fB\-\-help\-ms\-host\-shutdown\fR
Show Microsoft Host Shutdown Service options
.TP
\fB\-\-help\-atds\fR
Show AT&T Device Service options
.TP
\fB\-\-help\-intel\-firmware\-update\fR
Show Intel Firmware Update Service options
.TP
\fB\-\-help\-ms\-basic\-connect\-extensions\fR
Show Microsoft Basic Connect Extensions Service options
.SS "Basic Connect options:"
.TP
\fB\-\-query\-device\-caps\fR
Query device capabilities
.TP
\fB\-\-query\-subscriber\-ready\-status\fR
Query subscriber ready status
.TP
\fB\-\-query\-radio\-state\fR
Query radio state
.TP
\fB\-\-set\-radio\-state\fR=\fI\,[\/\fR(on|off)]
Set radio state
.TP
\fB\-\-query\-device\-services\fR
Query device services
.TP
\fB\-\-query\-pin\-state\fR
Query PIN state
.TP
\fB\-\-enter\-pin\fR=\fI\,[\/\fR(current PIN)]
Enter PIN
.TP
\fB\-\-change\-pin\fR=\fI\,[\/\fR(current PIN),(new PIN)]
Change PIN
.TP
\fB\-\-enable\-pin\fR=\fI\,[\/\fR(current PIN)]
Enable PIN
.TP
\fB\-\-disable\-pin\fR=\fI\,[\/\fR(current PIN)]
Disable PIN
.TP
\fB\-\-enter\-puk\fR=\fI\,[\/\fR(PUK),(new PIN)]
Enter PUK
.TP
\fB\-\-query\-pin\-list\fR
Query PIN list
.TP
\fB\-\-query\-home\-provider\fR
Query home provider
.TP
\fB\-\-query\-preferred\-providers\fR
Query preferred providers
.TP
\fB\-\-query\-visible\-providers\fR
Query visible providers
.TP
\fB\-\-query\-registration\-state\fR
Query registration state
.TP
\fB\-\-register\-automatic\fR
Launch automatic registration
.TP
\fB\-\-query\-signal\-state\fR
Query signal state
.TP
\fB\-\-query\-packet\-service\-state\fR
Query packet service state
.TP
\fB\-\-attach\-packet\-service\fR
Attach to the packet service
.TP
\fB\-\-detach\-packet\-service\fR
Detach from the packet service
.TP
\fB\-\-query\-connection\-state\fR=\fI\,[SessionID]\/\fR
Query connection state (SessionID is optional, defaults to 0)
.TP
\fB\-\-connect\fR=\fI\,[\/\fR"key=value,..."]
Connect (allowed keys: session\-id, apn, ip\-type (ipv4|ipv6|ipv4v6), auth (PAP|CHAP|MSCHAPV2), username, password)
.TP
\fB\-\-query\-ip\-configuration\fR=\fI\,[SessionID]\/\fR
Query IP configuration (SessionID is optional, defaults to 0)
.TP
\fB\-\-disconnect\fR=\fI\,[SessionID]\/\fR
Disconnect (SessionID is optional, defaults to 0)
.TP
\fB\-\-query\-packet\-statistics\fR
Query packet statistics
.TP
\fB\-\-query\-ip\-packet\-filters\fR=\fI\,[SessionID]\/\fR
Query IP packet filters (SessionID is optional, defaults to 0)
.TP
\fB\-\-query\-provisioned\-contexts\fR
Query provisioned contexts
.SS "Phonebook options:"
.TP
\fB\-\-phonebook\-query\-configuration\fR
Query the phonebook configuration
.TP
\fB\-\-phonebook\-read\fR=\fI\,[\/\fR(Phonebook index)]
Read phonebook entry with given index
.TP
\fB\-\-phonebook\-read\-all\fR
Read all phonebook entries
.TP
\fB\-\-phonebook\-write\fR=\fI\,[\/\fR(Name),(Number)[,(Index)]]
Add new phonebook entry or update an existing one
.TP
\fB\-\-phonebook\-delete\fR=\fI\,[\/\fR(Phonebook index)]
Delete phonebook entry with given index
.TP
\fB\-\-phonebook\-delete\-all\fR
Delete all phonebook entries
.SS "Device Service Stream options:"
.TP
\fB\-\-dss\-connect\fR=\fI\,[\/\fR(UUID),(Session ID)]
Connect DSS session
.TP
\fB\-\-dss\-disconnect\fR=\fI\,[\/\fR(UUID),(Session ID)]
Disconnect DSS session
.SS "Microsoft Firmware ID options:"
.TP
\fB\-\-ms\-query\-firmware\-id\fR
Query firmware ID
.SS "Microsoft Host Shutdown options:"
.TP
\fB\-\-ms\-notify\-host\-shutdown\fR
Notify that host is shutting down
.SS "AT&T Device Service options:"
.TP
\fB\-\-atds\-query\-signal\fR
Query signal info
.TP
\fB\-\-atds\-query\-location\fR
Query cell location
.SS "Intel Firmware Update Service options:"
.TP
\fB\-\-intel\-modem\-reboot\fR
Reboot modem
.SS "Microsoft Basic Connect Extensions options:"
.TP
\fB\-\-ms\-query\-pco\fR=\fI\,[SessionID]\/\fR
Query PCO value (SessionID is optional, defaults to 0)
.TP
\fB\-\-ms\-query\-lte\-attach\-configuration\fR
Query LTE attach configuration
.TP
\fB\-\-ms\-query\-lte\-attach\-status\fR
Query LTE attach status
.SS "Application Options:"
.TP
\fB\-d\fR, \fB\-\-device\fR=\fI\,[PATH]\/\fR
Specify device path
.TP
\fB\-p\fR, \fB\-\-device\-open\-proxy\fR
Request to use the 'mbim\-proxy' proxy
.TP
\fB\-\-no\-open\fR=\fI\,[Transaction\/\fR ID]
Do not explicitly open the MBIM device before running the command
.TP
\fB\-\-no\-close\fR
Do not close the MBIM device after running the command
.TP
\fB\-\-noop\fR
Don't run any command
.TP
\fB\-v\fR, \fB\-\-verbose\fR
Run action with verbose logs, including the debug ones
.TP
\fB\-\-silent\fR
Run action with no logs; not even the error/warning ones
.TP
\fB\-V\fR, \fB\-\-version\fR
Print version
.SH COPYRIGHT
Copyright \(co 2013\-2020 Aleksander Morgado
License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl\-2.0.html>
.br
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
.SH "SEE ALSO"
The full documentation for
.B mbimcli
is maintained as a Texinfo manual.  If the
.B info
and
.B mbimcli
programs are properly installed at your site, the command
.IP
.B info mbimcli
.PP
should give you access to the complete manual.