NAME¶btrfs-balance - balance block groups on a btrfs filesystem
SYNOPSIS¶btrfs balance <subcommand> <args>
DESCRIPTION¶The primary purpose of the balance feature is to spread block groups across all devices so they match constraints defined by the respective profiles. See mkfs.btrfs(8) section PROFILES for more details. The scope of the balancing process can be further tuned by use of filters that can select the block groups to process. Balance works only on a mounted filesystem. Extent sharing is preserved and reflinks are not broken. Files are not defragmented nor recompressed, file extents are preserved but the physical location on devices will change.
The balance operation is cancellable by the user. The on-disk state of the filesystem is always consistent so an unexpected interruption (eg. system crash, reboot) does not corrupt the filesystem. The progress of the balance operation is temporarily stored as an internal state and will be resumed upon mount, unless the mount option skip_balance is specified.
running balance without filters will take a lot of time as it basically move data/metadata from the whol filesystem and needs to update all block pointers.
The filters can be used to perform following actions:
The filters can be applied to a combination of block group types (data, metadata, system). Note that changing only the system type needs the force option. Otherwise system gets automatically converted whenver metadata profile is converted.
When metadata redundancy is reduced (eg. from RAID1 to single) the force option is also required and it is noted in system log.
the balance operation needs enough work space, ie. space that is completely unused in the filesystem, otherwise this may lead to ENOSPC reports. See the section ENOSPC for more details.
The balance subcommand also exists under the btrfs filesystem namespace. This still works for backward compatibility but is deprecated and should not be used any more.
A short syntax btrfs balance <path> works due to backward compatibility but is deprecated and should not be used any more. Use btrfs balance start command instead.
PERFORMANCE IMPLICATIONS¶Balancing operations are very IO intensive and can also be quite CPU intensive, impacting other ongoing filesystem operations. Typically large amounts of data are copied from one location to another, with corresponding metadata updates.
Depending upon the block group layout, it can also be seek heavy. Performance on rotational devices is noticeably worse compared to SSDs or fast arrays.
Since kernel 5.7 the response time of the cancellation is significantly improved, on older kernels it might take a long time until currently processed chunk is completely finished.
start [options] <path>
the balance command without filters will basically move everything in the filesystem to a new physical location on devices (ie. it does not affect the logical properties of file extents like offsets within files and extent sharing). The run time is potentially very long, depending on the filesystem size. To prevent starting a full balance by accident, the user is warned and has a few seconds to cancel the operation before it starts. The warning and delay can be skipped with --full-balance option.
status [-v] <path>
FILTERS¶From kernel 3.3 onwards, btrfs balance can limit its action to a subset of the whole filesystem, and can be used to change the replication configuration (e.g. moving data from single to RAID1). This functionality is accessed through the -d, -m or -s options to btrfs balance start, which filter on data, metadata and system blocks respectively.
A filter has the following structure: type[=params][,type=...]
The available types are:
The argument may be a single value or a range. The single value N means at most N percent used, equivalent to ..N range syntax. Kernels prior to 4.4 accept only the single value format. The minimum range boundary is inclusive, maximum is exclusive.
starting with kernel 4.5, the data chunks can be converted to/from the DUP profile on a single device.
starting with kernel 4.6, all profiles can be converted to/from DUP on multi-device filesystems.
The argument may be a single value or a range. The single value N means at most N chunks, equivalent to ..N range syntax. Kernels prior to 4.4 accept only the single value format. The range minimum and maximum are inclusive.
The soft mode switch is (like every other filter) per-type. For example, this means that we can convert metadata chunks the "hard" way while converting data chunks selectively with soft switch.
Profile names, used in profiles and convert are one of: raid0, raid1, raid10, raid5, raid6, dup, single. The mixed data/metadata profiles can be converted in the same way, but it’s conversion between mixed and non-mixed is not implemented. For the constraints of the profiles please refer to mkfs.btrfs(8), section PROFILES.
ENOSPC¶The way balance operates, it usually needs to temporarily create a new block group and move the old data there, before the old block group can be removed. For that it needs the work space, otherwise it fails for ENOSPC reasons. This is not the same ENOSPC as if the free space is exhausted. This refers to the space on the level of block groups, which are bigger parts of the filesystem that contain many file extents.
The free work space can be calculated from the output of the btrfs filesystem show command:
Label: 'BTRFS' uuid: 8a9d72cd-ead3-469d-b371-9c7203276265 Total devices 2 FS bytes used 77.03GiB devid 1 size 53.90GiB used 51.90GiB path /dev/sdc2 devid 2 size 53.90GiB used 51.90GiB path /dev/sde1
size - used = free work space 53.90GiB - 51.90GiB = 2.00GiB
An example of a filter that does not require workspace is usage=0. This will scan through all unused block groups of a given type and will reclaim the space. After that it might be possible to run other filters.
CONVERSIONS ON MULTIPLE DEVICES
Conversion to profiles based on striping (RAID0, RAID5/6) require the work space on each device. An interrupted balance may leave partially filled block groups that consume the work space.
EXAMPLES¶A more comprehensive example when going from one to multiple devices, and back, can be found in section TYPICAL USECASES of btrfs-device(8).
MAKING BLOCK GROUP LAYOUT MORE COMPACT¶The layout of block groups is not normally visible; most tools report only summarized numbers of free or used space, but there are still some hints provided.
Let’s use the following real life example and start with the output:
$ btrfs filesystem df /path Data, single: total=75.81GiB, used=64.44GiB System, RAID1: total=32.00MiB, used=20.00KiB Metadata, RAID1: total=15.87GiB, used=8.84GiB GlobalReserve, single: total=512.00MiB, used=0.00B
Roughly calculating for data, 75G - 64G = 11G, the used/total ratio is about 85%. How can we can interpret that:
Compacting the layout could be used on both. In the former case it would spread data of a given chunk to the others and removing it. Here we can estimate that roughly 850 MiB of data have to be moved (85% of a 1 GiB chunk).
In the latter case, targeting the partially used chunks will have to move less data and thus will be faster. A typical filter command would look like:
# btrfs balance start -dusage=50 /path Done, had to relocate 2 out of 97 chunks $ btrfs filesystem df /path Data, single: total=74.03GiB, used=64.43GiB System, RAID1: total=32.00MiB, used=20.00KiB Metadata, RAID1: total=15.87GiB, used=8.84GiB GlobalReserve, single: total=512.00MiB, used=0.00B
As you can see, the total amount of data is decreased by just 1 GiB, which is an expected result. Let’s see what will happen when we increase the estimated usage filter.
# btrfs balance start -dusage=85 /path Done, had to relocate 13 out of 95 chunks $ btrfs filesystem df /path Data, single: total=68.03GiB, used=64.43GiB System, RAID1: total=32.00MiB, used=20.00KiB Metadata, RAID1: total=15.87GiB, used=8.85GiB GlobalReserve, single: total=512.00MiB, used=0.00B
Now the used/total ratio is about 94% and we moved about 74G - 68G = 6G of data to the remaining blockgroups, ie. the 6GiB are now free of filesystem structures, and can be reused for new data or metadata block groups.
We can do a similar exercise with the metadata block groups, but this should not typically be necessary, unless the used/total ratio is really off. Here the ratio is roughly 50% but the difference as an absolute number is "a few gigabytes", which can be considered normal for a workload with snapshots or reflinks updated frequently.
# btrfs balance start -musage=50 /path Done, had to relocate 4 out of 89 chunks $ btrfs filesystem df /path Data, single: total=68.03GiB, used=64.43GiB System, RAID1: total=32.00MiB, used=20.00KiB Metadata, RAID1: total=14.87GiB, used=8.85GiB GlobalReserve, single: total=512.00MiB, used=0.00B
Just 1 GiB decrease, which possibly means there are block groups with good utilization. Making the metadata layout more compact would in turn require updating more metadata structures, ie. lots of IO. As running out of metadata space is a more severe problem, it’s not necessary to keep the utilization ratio too high. For the purpose of this example, let’s see the effects of further compaction:
# btrfs balance start -musage=70 /path Done, had to relocate 13 out of 88 chunks $ btrfs filesystem df . Data, single: total=68.03GiB, used=64.43GiB System, RAID1: total=32.00MiB, used=20.00KiB Metadata, RAID1: total=11.97GiB, used=8.83GiB GlobalReserve, single: total=512.00MiB, used=0.00B
GETTING RID OF COMPLETELY UNUSED BLOCK GROUPS¶Normally the balance operation needs a work space, to temporarily move the data before the old block groups gets removed. If there’s no work space, it ends with no space left.
There’s a special case when the block groups are completely unused, possibly left after removing lots of files or deleting snapshots. Removing empty block groups is automatic since 3.18. The same can be achieved manually with a notable exception that this operation does not require the work space. Thus it can be used to reclaim unused block groups to make it available.
# btrfs balance start -dusage=0 /path
This should lead to decrease in the total numbers in the btrfs filesystem df output.
EXIT STATUS¶Unless indicated otherwise below, all btrfs balance subcommands return a zero exit status if they succeed, and non zero in case of failure.
The pause, cancel, and resume subcommands exit with a status of 2 if they fail because a balance operation was not running.
The status subcommand exits with a status of 0 if a balance operation is not running, 1 if the command-line usage is incorrect or a balance operation is still running, and 2 on other errors.
AVAILABILITY¶btrfs is part of btrfs-progs. Please refer to the btrfs wiki http://btrfs.wiki.kernel.org for further details.
SEE ALSO¶mkfs.btrfs(8), btrfs-device(8)