'\"
'\" Generated from file 'uri\&.man' by tcllib/doctools with format 'nroff'
'\"
.TH "uri" 3tcl 1\&.2\&.7 tcllib "Tcl Uniform Resource Identifier Management"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp
-1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
.SH NAME
uri \- URI utilities
.SH SYNOPSIS
package require \fBTcl  8\&.2\fR
.sp
package require \fBuri  ?1\&.2\&.7?\fR
.sp
\fBuri::setQuirkOption\fR \fIoption\fR ?\fIvalue\fR?
.sp
\fBuri::split\fR \fIurl\fR ?\fIdefaultscheme\fR?
.sp
\fBuri::join\fR ?\fIkey\fR \fIvalue\fR?\&.\&.\&.
.sp
\fBuri::resolve\fR \fIbase\fR \fIurl\fR
.sp
\fBuri::isrelative\fR \fIurl\fR
.sp
\fBuri::geturl\fR \fIurl\fR ?\fIoptions\fR\&.\&.\&.?
.sp
\fBuri::canonicalize\fR \fIuri\fR
.sp
\fBuri::register\fR \fIschemeList\fR \fIscript\fR
.sp
.BE
.SH DESCRIPTION
This package does two things\&.
.PP
First, it provides a number of
commands for manipulating URLs/URIs and fetching data specified by
them\&. For fetching data this package analyses the requested URL/URI and
then dispatches it to the appropriate package (\fBhttp\fR, \fBftp\fR, \&.\&.\&.) for
actual retrieval\&.  Currently these commands are defined for the schemes
\fIhttp\fR, \fIhttps\fR, \fIftp\fR, \fImailto\fR, \fInews\fR,
\fIldap\fR, \fIldaps\fR and \fIfile\fR\&.  The package \fBuri::urn\fR adds scheme \fIurn\fR\&.
.PP
Second, it provides regular expressions
for a number of \fBregistered\fR URL/URI schemes\&. Registered
schemes are currently \fIftp\fR, \fIldap\fR, \fIldaps\fR, \fIfile\fR,
\fIhttp\fR, \fIhttps\fR, \fIgopher\fR, \fImailto\fR, \fInews\fR,
\fIwais\fR and \fIprospero\fR\&.  The package \fBuri::urn\fR adds scheme
\fIurn\fR\&.
.PP
The commands of the package conform to
RFC 3986 (\fIhttps://www\&.rfc-editor\&.org/rfc/rfc3986\&.txt\fR),
with the exception of a loophole arising from RFC 1630 and described
in RFC 3986 Sections 5\&.2\&.2 and 5\&.4\&.2\&. The loophole allows a relative
URI to include a scheme if it is the same as the scheme of the base
URI against which it is resolved\&. RFC 3986 recommends avoiding this usage\&.
.SH COMMANDS
.TP
\fBuri::setQuirkOption\fR \fIoption\fR ?\fIvalue\fR?
\fBuri::setQuirkOption\fR is an accessor command for a number of "quirk options"\&.
The command has the same semantics as the command \fBset\fR: when called with one argument it reads an existing value; with two arguments it writes a new value\&.  The value of a "quirk option" is boolean: the value \fBfalse\fR requests conformance with RFC 3986, while \fBtrue\fR requests use of the quirk\&.  See section \fBQUIRK OPTIONS\fR for discussion of the different options and their purpose\&.
.TP
\fBuri::split\fR \fIurl\fR ?\fIdefaultscheme\fR?
\fBuri::split\fR takes a \fIurl\fR, decodes it and then returns a
list of key/value pairs suitable for \fBarray set\fR containing the
constituents of the \fIurl\fR\&. If the scheme is missing from the \fIurl\fR
it defaults to the value of \fIdefaultscheme\fR if it was specified,
or \fIhttp\fR else\&. Currently the schemes \fIhttp\fR,
\fIhttps\fR, \fIftp\fR, \fImailto\fR, \fInews\fR, \fIldap\fR, \fIldaps\fR and
\fIfile\fR are supported by the package itself\&.
See section \fBEXTENDING\fR on how to expand that range\&.
.sp
The set of constituents of a URL (= the set of keys in the returned
dictionary) is dependent on the scheme of the URL\&. The only key which
is therefore always present is \fBscheme\fR\&. For the following
schemes the constituents and their keys are known:
.RS
.TP
ftp
\fBuser\fR, \fBpwd\fR, \fBhost\fR, \fBport\fR,
\fBpath\fR, \fBtype\fR, \fBpbare\fR\&.  The pbare is optional\&.
.TP
http(s)
\fBuser\fR, \fBpwd\fR, \fBhost\fR, \fBport\fR,
\fBpath\fR, \fBquery\fR, \fBfragment\fR, \fBpbare\fR\&.  The pbare is optional\&.
.TP
file
\fBpath\fR, \fBhost\fR\&. The host is optional\&.
.TP
mailto
\fBuser\fR, \fBhost\fR\&. The host is optional\&.
.TP
ldap(s)
\fBhost\fR, \fBport\fR, \fBdn\fR, \fBattrs\fR, \fBscope\fR, \fBfilter\fR, \fBextensions\fR
.TP
news
Either \fBmessage-id\fR or \fBnewsgroup-name\fR\&.
.RE
.IP
For discussion of the boolean \fBpbare\fR see options \fINoInitialSlash\fR and \fINoExtraKeys\fR in \fBQUIRK OPTIONS\fR\&.
.sp
The constituents are returned as slices of the argument \fIurl\fR, without removal of percent-encoding ("url-encoding") or other adaptations\&.  Notably, on Windows® the \fBpath\fR in scheme \fIfile\fR is not a valid local filename\&.  See \fBEXAMPLES\fR for more information\&.
.sp
.TP
\fBuri::join\fR ?\fIkey\fR \fIvalue\fR?\&.\&.\&.
\fBuri::join\fR takes a list of key/value pairs (generated by
\fBuri::split\fR, for example) and returns the canonical URL they
represent\&. Currently the schemes \fIhttp\fR, \fIhttps\fR,
\fIftp\fR, \fImailto\fR, \fInews\fR, \fIldap\fR, \fIldaps\fR and \fIfile\fR
are supported by the package itself\&. See section \fBEXTENDING\fR on how to expand that range\&.
.sp
The arguments are expected to be slices of a valid URL, with percent-encoding ("url-encoding") and any other necessary adaptations\&.  Notably, on Windows the \fBpath\fR in scheme \fIfile\fR is not a valid local filename\&.  See \fBEXAMPLES\fR for more information\&.
.TP
\fBuri::resolve\fR \fIbase\fR \fIurl\fR
\fBuri::resolve\fR resolves the specified \fIurl\fR relative to
\fIbase\fR, in conformance with RFC 3986\&. In other words: a
non-relative \fIurl\fR is returned
unchanged, whereas for a relative \fIurl\fR the missing parts are
taken from \fIbase\fR and prepended to it\&. The result of this
operation is returned\&. For an empty \fIurl\fR the result is
\fIbase\fR, without its URI fragment (if any)\&.  The command is available for schemes \fIhttp\fR, \fIhttps\fR, \fIftp\fR, and \fIfile\fR\&.
.TP
\fBuri::isrelative\fR \fIurl\fR
\fBuri::isrelative\fR determines whether the specified \fIurl\fR is
absolute or relative\&.  The command is available for a \fIurl\fR of any scheme\&.
.TP
\fBuri::geturl\fR \fIurl\fR ?\fIoptions\fR\&.\&.\&.?
\fBuri::geturl\fR decodes the specified \fIurl\fR and then dispatches
the request to the package appropriate for the scheme found in the
URL\&. The command assumes that the package to handle the given scheme
either has the same name as the scheme itself (including possible
capitalization) followed by \fB::geturl\fR, or, in case of this
failing, has the same name as the scheme itself (including possible
capitalization)\&. It further assumes that whatever package was loaded
provides a \fBgeturl\fR-command in the namespace of the same name as
the package itself\&. This command is called with the given \fIurl\fR
and all given \fIoptions\fR\&. Currently \fBgeturl\fR does not handle
any options itself\&.
.sp
\fINote:\fR \fIfile\fR-URLs are an exception to the rule
described above\&. They are handled internally\&.
.sp
It is not possible to specify results of the command\&. They depend on
the \fBgeturl\fR-command for the scheme the request was dispatched to\&.
.TP
\fBuri::canonicalize\fR \fIuri\fR
\fBuri::canonicalize\fR returns the canonical form of a URI\&.  The
canonical form of a URI is one where relative path specifications,
i\&.e\&. "\&." and "\&.\&.", have been resolved\&.  The command is available for all
URI schemes that have \fBuri::split\fR and \fBuri::join\fR commands\&. The command
returns a canonicalized URI if the URI scheme has a \fBpath\fR component (i\&.e\&. \fIhttp\fR, \fIhttps\fR, \fIftp\fR, and \fIfile\fR)\&.  For schemes that have \fBuri::split\fR and \fBuri::join\fR commands but no \fBpath\fR component (i\&.e\&. \fImailto\fR, \fInews\fR, \fIldap\fR, and \fIldaps\fR), the command returns the \fIuri\fR unchanged\&.
.TP
\fBuri::register\fR \fIschemeList\fR \fIscript\fR
\fBuri::register\fR registers the first element of \fIschemeList\fR as
a new scheme and the remaining elements as aliases for this scheme\&. It
creates the namespace for the scheme and executes the \fIscript\fR in
the new namespace\&. The script has to declare variables containing
regular expressions relevant to the scheme\&. At least the variable
\fBschemepart\fR has to be declared as that one is used to extend
the variables keeping track of the registered schemes\&.
.PP
.SH SCHEMES
In addition to the commands mentioned above this package provides
regular expression to recognize URLs for a number of URL schemes\&.
.PP
For each supported scheme a namespace of the same name as the scheme
itself is provided inside of the namespace \fIuri\fR containing the
variable \fBurl\fR whose contents are a regular expression to
recognize URLs of that scheme\&. Additional variables may contain
regular expressions for parts of URLs for that scheme\&.
.PP
The variable \fBuri::schemes\fR contains a list of all registered
schemes\&. Currently these are \fIftp\fR, \fIldap\fR, \fIldaps\fR, \fIfile\fR,
\fIhttp\fR, \fIhttps\fR, \fIgopher\fR, \fImailto\fR, \fInews\fR,
\fIwais\fR and \fIprospero\fR\&.
.SH EXTENDING
Extending the range of schemes supported by \fBuri::split\fR and
\fBuri::join\fR is easy because both commands do not handle the
request by themselves but dispatch it to another command in the
\fIuri\fR namespace using the scheme of the URL as criterion\&.
.PP
\fBuri::split\fR and \fBuri::join\fR
call \fBSplit[string totitle <scheme>]\fR
and  \fBJoin[string totitle <scheme>]\fR respectively\&.
.PP
The provision of split and join commands is sufficient to extend the commands \fBuri::canonicalize\fR and \fBuri::geturl\fR
(the latter subject to the availability of a suitable package with a \fBgeturl\fR command)\&.  In contrast, to extend the command \fBuri::resolve\fR to a new scheme, the command itself must be modified\&.
.PP
To extend the range of schemes for which pattern information is
available, use the command \fBuri::register\fR\&.
.PP
An example of a package that provides both commands and pattern information for a new scheme is \fBuri::urn\fR, which adds scheme \fIurn\fR\&.
.SH "QUIRK OPTIONS"
The value of a "quirk option" is boolean: the value \fBfalse\fR requests conformance with RFC 3986, while \fBtrue\fR requests use of the quirk\&.  Use command \fBuri::setQuirkOption\fR to access the values of quirk options\&.
.PP
Quirk options are useful both for allowing backwards compatibility when a command
specification changes, and for adding useful features that are not included
in RFC specifications\&.  The following quirk options are currently defined:
.TP
\fINoInitialSlash\fR
This quirk option concerns the leading character of \fBpath\fR (if non-empty) in the schemes \fIhttp\fR, \fIhttps\fR, and \fIftp\fR\&.
.sp
RFC 3986 defines \fBpath\fR in an absolute URI to have an initial "/", unless the value of \fBpath\fR is the empty string\&. For the scheme \fIfile\fR, all versions of package \fBuri\fR follow this rule\&.  The quirk option \fINoInitialSlash\fR does not apply to scheme \fIfile\fR\&.
.sp
For the schemes \fIhttp\fR, \fIhttps\fR, and \fIftp\fR, versions of \fBuri\fR before 1\&.2\&.7 define the \fBpath\fR \fINOT\fR to include an initial "/"\&.  When the quirk option \fINoInitialSlash\fR is \fBtrue\fR (the default), this behavior is also used in version 1\&.2\&.7\&.  To use instead values of \fBpath\fR as defined by RFC 3986, set this quirk option to \fBfalse\fR\&.
.sp
This setting does not affect RFC 3986 conformance\&.  If \fINoInitialSlash\fR is \fBtrue\fR, then the value of \fBpath\fR in the schemes \fIhttp\fR, \fIhttps\fR, or \fIftp\fR, cannot distinguish between URIs in which the full "RFC 3986 path" is the empty string "" or a single slash "/" respectively\&.  The missing information is recorded in an additional \fBuri::split\fR key \fBpbare\fR\&.
.sp
The boolean \fBpbare\fR is defined when quirk options \fINoInitialSlash\fR and \fINoExtraKeys\fR have values \fBtrue\fR and \fBfalse\fR respectively\&.  In this case, if the value of \fBpath\fR is the empty string "", \fBpbare\fR is \fBtrue\fR if the full "RFC 3986 path" is "", and \fBpbare\fR is \fBfalse\fR if the full "RFC 3986 path" is "/"\&.
.sp
Using this quirk option \fINoInitialSlash\fR is a matter of preference\&.
.TP
\fINoExtraKeys\fR
This quirk option permits full backward compatibility with versions of \fBuri\fR before 1\&.2\&.7, by omitting the \fBuri::split\fR key \fBpbare\fR described above (see quirk option \fINoInitialSlash\fR)\&.  The outcome is greater backward compatibility of the \fBuri::split\fR command, but an inability to distinguish between URIs in which the full "RFC 3986 path" is the empty string "" or a single slash "/" respectively - i\&.e\&. a minor non-conformance with RFC 3986\&.
.sp
If the quirk option \fINoExtraKeys\fR is \fBfalse\fR (the default), command \fBuri::split\fR returns an additional key \fBpbare\fR, and the commands comply with RFC 3986\&. If the quirk option \fINoExtraKeys\fR is \fBtrue\fR, the key \fBpbare\fR is not defined and there is not full conformance with RFC 3986\&.
.sp
Using the quirk option \fINoExtraKeys\fR is \fINOT\fR recommended, because if set to \fBtrue\fR it will reduce conformance with RFC 3986\&.  The option is included only for compatibility with code, written for earlier versions of \fBuri\fR, that needs values of \fBpath\fR without a leading "/", \fIAND ALSO\fR cannot tolerate unexpected keys in the results of \fBuri::split\fR\&.
.TP
\fIHostAsDriveLetter\fR
When handling the scheme \fIfile\fR on the
Windows platform, versions of \fBuri\fR before 1\&.2\&.7
use the \fBhost\fR field to represent a Windows drive letter and the colon that follows it, and the \fBpath\fR field to represent the filename path after the colon\&.  Such URIs are invalid, and are not recognized by any RFC\&. When the quirk option \fIHostAsDriveLetter\fR is \fBtrue\fR, this behavior is also used in version 1\&.2\&.7\&.  To use \fIfile\fR URIs on Windows that conform to RFC 3986, set this quirk option to \fBfalse\fR (the default)\&.
.sp
Using this quirk is \fINOT\fR recommended, because if set to \fBtrue\fR it will cause the \fBuri\fR commands to expect and produce invalid URIs\&.  The option is included only for compatibility with legacy code\&.
.TP
\fIRemoveDoubleSlashes\fR
When a URI is canonicalized by \fBuri::canonicalize\fR, its \fBpath\fR is normalized by removal of segments "\&." and "\&.\&."\&.  RFC 3986 does not mandate
the removal of empty segments "" (i\&.e\&. the merger of double slashes, which is a feature of filename normalization but not of URI \fBpath\fR normalization): it treats URIs with excess slashes as referring to different resources\&.  When the quirk option \fIRemoveDoubleSlashes\fR is \fBtrue\fR (the default), empty segments will be removed from \fBpath\fR\&.  To prevent removal, and thereby conform to RFC 3986, set this quirk option to \fBfalse\fR\&.
.sp
Using this quirk is a matter of preference\&.  A URI with double slashes in its path was most likely generated by error, certainly so if it has a straightforward mapping to a file on a server\&.  In some cases it may be better to sanitize the URI; in others, to keep the URI and let the server handle the possible error\&.
.PP
.PP
.SS "BACKWARD COMPATIBILITY"
To behave as similarly as possible to versions of \fBuri\fR earlier than 1\&.2\&.7, set the following quirk options:
.IP \(bu
\fBuri::setQuirkOption\fR \fINoInitialSlash\fR 1
.IP \(bu
\fBuri::setQuirkOption\fR \fINoExtraKeys\fR 1
.IP \(bu
\fBuri::setQuirkOption\fR \fIHostAsDriveLetter\fR 1
.IP \(bu
\fBuri::setQuirkOption\fR \fIRemoveDoubleSlashes\fR 0
.PP
In code that can tolerate the return by \fBuri::split\fR of an additional key \fBpbare\fR, set
.IP \(bu
\fBuri::setQuirkOption\fR \fINoExtraKeys\fR 0
.PP
in order to achieve greater compliance with RFC 3986\&.
.SS "NEW DESIGNS"
For new projects, the following settings are recommended:
.IP \(bu
\fBuri::setQuirkOption\fR \fINoInitialSlash\fR 0
.IP \(bu
\fBuri::setQuirkOption\fR \fINoExtraKeys\fR 0
.IP \(bu
\fBuri::setQuirkOption\fR \fIHostAsDriveLetter\fR 0
.IP \(bu
\fBuri::setQuirkOption\fR \fIRemoveDoubleSlashes\fR 0|1
.PP
.SS "DEFAULT VALUES"
The default values for package \fBuri\fR version 1\&.2\&.7 are intended to be a compromise between backwards compatibility and improved features\&.  Different default values may be chosen in future versions of package \fBuri\fR\&.
.IP \(bu
\fBuri::setQuirkOption\fR \fINoInitialSlash\fR 1
.IP \(bu
\fBuri::setQuirkOption\fR \fINoExtraKeys\fR 0
.IP \(bu
\fBuri::setQuirkOption\fR \fIHostAsDriveLetter\fR 0
.IP \(bu
\fBuri::setQuirkOption\fR \fIRemoveDoubleSlashes\fR 1
.PP
.SH EXAMPLES
A Windows® local filename such as "\fBC:\\Other Files\\startup\&.txt\fR" is not suitable for use as the \fBpath\fR element of a URI in the scheme \fIfile\fR\&.
.PP
The Tcl command \fBfile normalize\fR will convert the backslashes to forward slashes\&.  To generate a valid \fBpath\fR for the scheme \fIfile\fR, the normalized filename must be prepended with "\fB/\fR", and then any characters that do not match the \fBregexp\fR bracket expression
.CS


    [a-zA-Z0-9$_\&.+!*'(,)?:@&=-]

.CE
must be percent-encoded\&.
.PP
The result in this example is "\fB/C:/Other%20Files/startup\&.txt\fR" which is a valid value for \fBpath\fR\&.
.CS


% uri::join path /C:/Other%20Files/startup\&.txt scheme file

file:///C:/Other%20Files/startup\&.txt

% uri::split file:///C:/Other%20Files/startup\&.txt

path /C:/Other%20Files/startup\&.txt scheme file


.CE
On UNIX® systems filenames begin with "\fB/\fR" which is also used as the directory separator\&.  The only action needed to convert a filename to a valid \fBpath\fR is percent-encoding\&.
.SH CREDITS
.PP
Original code (regular expressions) by Andreas Kupries\&.
Modularisation by Steve Ball, also the split/join/resolve
functionality\&. RFC 3986 conformance by Keith Nash\&.
.SH "BUGS, IDEAS, FEEDBACK"
This document, and the package it describes, will undoubtedly contain
bugs and other problems\&.
Please report such in the category \fIuri\fR of the
\fITcllib Trackers\fR [http://core\&.tcl\&.tk/tcllib/reportlist]\&.
Please also report any ideas for enhancements you may have for either
package and/or documentation\&.
.PP
When proposing code changes, please provide \fIunified diffs\fR,
i\&.e the output of \fBdiff -u\fR\&.
.PP
Note further that \fIattachments\fR are strongly preferred over
inlined patches\&. Attachments can be made by going to the \fBEdit\fR
form of the ticket immediately after its creation, and then using the
left-most button in the secondary navigation bar\&.
.SH KEYWORDS
fetching information, file, ftp, gopher, http, https, ldap, mailto, news, prospero, rfc 1630, rfc 2255, rfc 2396, rfc 3986, uri, url, wais, www
.SH CATEGORY
Networking