'\" '\" Generated from file 'pt_peg_export\&.man' by tcllib/doctools with format 'nroff' '\" Copyright (c) 2009 Andreas Kupries '\" .TH "pt::peg::export" 3tcl 1\&.0\&.1 tcllib "Parser Tools" .\" The -*- nroff -*- definitions below are for supplemental macros used .\" in Tcl/Tk manual entries. .\" .\" .AP type name in/out ?indent? .\" Start paragraph describing an argument to a library procedure. .\" type is type of argument (int, etc.), in/out is either "in", "out", .\" or "in/out" to describe whether procedure reads or modifies arg, .\" and indent is equivalent to second arg of .IP (shouldn't ever be .\" needed; use .AS below instead) .\" .\" .AS ?type? ?name? .\" Give maximum sizes of arguments for setting tab stops. Type and .\" name are examples of largest possible arguments that will be passed .\" to .AP later. If args are omitted, default tab stops are used. .\" .\" .BS .\" Start box enclosure. From here until next .BE, everything will be .\" enclosed in one large box. .\" .\" .BE .\" End of box enclosure. .\" .\" .CS .\" Begin code excerpt. .\" .\" .CE .\" End code excerpt. .\" .\" .VS ?version? ?br? .\" Begin vertical sidebar, for use in marking newly-changed parts .\" of man pages. The first argument is ignored and used for recording .\" the version when the .VS was added, so that the sidebars can be .\" found and removed when they reach a certain age. If another argument .\" is present, then a line break is forced before starting the sidebar. .\" .\" .VE .\" End of vertical sidebar. .\" .\" .DS .\" Begin an indented unfilled display. .\" .\" .DE .\" End of indented unfilled display. .\" .\" .SO ?manpage? .\" Start of list of standard options for a Tk widget. The manpage .\" argument defines where to look up the standard options; if .\" omitted, defaults to "options". The options follow on successive .\" lines, in three columns separated by tabs. .\" .\" .SE .\" End of list of standard options for a Tk widget. .\" .\" .OP cmdName dbName dbClass .\" Start of description of a specific option. cmdName gives the .\" option's name as specified in the class command, dbName gives .\" the option's name in the option database, and dbClass gives .\" the option's class in the option database. .\" .\" .UL arg1 arg2 .\" Print arg1 underlined, then print arg2 normally. .\" .\" .QW arg1 ?arg2? .\" Print arg1 in quotes, then arg2 normally (for trailing punctuation). .\" .\" .PQ arg1 ?arg2? .\" Print an open parenthesis, arg1 in quotes, then arg2 normally .\" (for trailing punctuation) and then a closing parenthesis. .\" .\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. .if t .wh -1.3i ^B .nr ^l \n(.l .ad b .\" # Start an argument description .de AP .ie !"\\$4"" .TP \\$4 .el \{\ . ie !"\\$2"" .TP \\n()Cu . el .TP 15 .\} .ta \\n()Au \\n()Bu .ie !"\\$3"" \{\ \&\\$1 \\fI\\$2\\fP (\\$3) .\".b .\} .el \{\ .br .ie !"\\$2"" \{\ \&\\$1 \\fI\\$2\\fP .\} .el \{\ \&\\fI\\$1\\fP .\} .\} .. .\" # define tabbing values for .AP .de AS .nr )A 10n .if !"\\$1"" .nr )A \\w'\\$1'u+3n .nr )B \\n()Au+15n .\" .if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n .nr )C \\n()Bu+\\w'(in/out)'u+2n .. .AS Tcl_Interp Tcl_CreateInterp in/out .\" # BS - start boxed text .\" # ^y = starting y location .\" # ^b = 1 .de BS .br .mk ^y .nr ^b 1u .if n .nf .if n .ti 0 .if n \l'\\n(.lu\(ul' .if n .fi .. .\" # BE - end boxed text (draw box now) .de BE .nf .ti 0 .mk ^t .ie n \l'\\n(^lu\(ul' .el \{\ .\" Draw four-sided box normally, but don't draw top of .\" box if the box started on an earlier page. .ie !\\n(^b-1 \{\ \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .el \}\ \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' .\} .\} .fi .br .nr ^b 0 .. .\" # VS - start vertical sidebar .\" # ^Y = starting y location .\" # ^v = 1 (for troff; for nroff this doesn't matter) .de VS .if !"\\$2"" .br .mk ^Y .ie n 'mc \s12\(br\s0 .el .nr ^v 1u .. .\" # VE - end of vertical sidebar .de VE .ie n 'mc .el \{\ .ev 2 .nf .ti 0 .mk ^t \h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' .sp -1 .fi .ev .\} .nr ^v 0 .. .\" # Special macro to handle page bottom: finish off current .\" # box/sidebar if in box/sidebar mode, then invoked standard .\" # page bottom macro. .de ^B .ev 2 'ti 0 'nf .mk ^t .if \\n(^b \{\ .\" Draw three-sided box if this is the box's first page, .\" draw two sides but no top otherwise. .ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c .\} .if \\n(^v \{\ .nr ^x \\n(^tu+1v-\\n(^Yu \kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c .\} .bp 'fi .ev .if \\n(^b \{\ .mk ^y .nr ^b 2 .\} .if \\n(^v \{\ .mk ^Y .\} .. .\" # DS - begin display .de DS .RS .nf .sp .. .\" # DE - end display .de DE .fi .RE .sp .. .\" # SO - start of list of standard options .de SO 'ie '\\$1'' .ds So \\fBoptions\\fR 'el .ds So \\fB\\$1\\fR .SH "STANDARD OPTIONS" .LP .nf .ta 5.5c 11c .ft B .. .\" # SE - end of list of standard options .de SE .fi .ft R .LP See the \\*(So manual entry for details on the standard options. .. .\" # OP - start of full description for a single option .de OP .LP .nf .ta 4c Command-Line Name: \\fB\\$1\\fR Database Name: \\fB\\$2\\fR Database Class: \\fB\\$3\\fR .fi .IP .. .\" # CS - begin code excerpt .de CS .RS .nf .ta .25i .5i .75i 1i .. .\" # CE - end code excerpt .de CE .fi .RE .. .\" # UL - underline word .de UL \\$1\l'|0\(ul'\\$2 .. .\" # QW - apply quotation marks to word .de QW .ie '\\*(lq'"' ``\\$1''\\$2 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\$2 .. .\" # PQ - apply parens and quotation marks to word .de PQ .ie '\\*(lq'"' (``\\$1''\\$2)\\$3 .\"" fix emacs highlighting .el (\\*(lq\\$1\\*(rq\\$2)\\$3 .. .\" # QR - quoted range .de QR .ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3 .\"" fix emacs highlighting .el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3 .. .\" # MT - "empty" string .de MT .QW "" .. .BS .SH NAME pt::peg::export \- PEG Export .SH SYNOPSIS package require \fBTcl 8\&.5\fR .sp package require \fBsnit \fR .sp package require \fBstruct::map \fR .sp package require \fBpt::peg \fR .sp package require \fBpluginmgr \fR .sp package require \fBpt::peg::export ?1\&.0\&.1?\fR .sp \fB::pt::peg::export\fR \fIobjectName\fR .sp \fBobjectName\fR \fBmethod\fR ?\fIarg arg \&.\&.\&.\fR? .sp \fIobjectName\fR \fBdestroy\fR .sp \fIobjectName\fR \fBexport serial\fR \fIserial\fR ?\fIformat\fR? .sp \fIobjectName\fR \fBexport object\fR \fIobject\fR ?\fIformat\fR? .sp \fIobjectName\fR \fBconfiguration names\fR .sp \fIobjectName\fR \fBconfiguration get\fR .sp \fIobjectName\fR \fBconfiguration set\fR \fIname\fR ?\fIvalue\fR? .sp \fIobjectName\fR \fBconfiguration unset\fR \fIpattern\fR\&.\&.\&. .sp .BE .SH DESCRIPTION .PP Are you lost ? Do you have trouble understanding this document ? In that case please read the overview provided by the \fIIntroduction to Parser Tools\fR\&. This document is the entrypoint to the whole system the current package is a part of\&. .PP This package provides a manager for parsing expression grammars, with each instance handling a set of plugins for the export of them to other formats, i\&.e\&. their conversion to, for example \fInroff\fR, \fIHTML\fR, etc\&. .PP It resides in the Export section of the Core Layer of Parser Tools, and is one of the three pillars the management of parsing expression grammars resides on\&. .PP IMAGE: arch_core_export .PP The other two pillars are, as shown above .IP [1] \fIPEG Import\fR, and .IP [2] \fIPEG Storage\fR .PP .PP For information about the data structure which is the major input to the manager objects provided by this package see the section \fBPEG serialization format\fR\&. .PP The plugin system of this class is based on the package \fBpluginmgr\fR, and configured to look for plugins using .IP [1] the environment variable \fBGRAMMAR_PEG_EXPORT_PLUGINS\fR, .IP [2] the environment variable \fBGRAMMAR_PEG_PLUGINS\fR, .IP [3] the environment variable \fBGRAMMAR_PLUGINS\fR, .IP [4] the path "\fI~/\&.grammar/peg/export/plugin\fR" .IP [5] the path "\fI~/\&.grammar/peg/plugin\fR" .IP [6] the path "\fI~/\&.grammar/plugin\fR" .IP [7] the path "\fI~/\&.grammar/peg/export/plugins\fR" .IP [8] the path "\fI~/\&.grammar/peg/plugins\fR" .IP [9] the path "\fI~/\&.grammar/plugins\fR" .IP [10] the registry entry "HKEY_CURRENT_USER\\SOFTWARE\\GRAMMAR\\PEG\\EXPORT\\PLUGINS" .IP [11] the registry entry "HKEY_CURRENT_USER\\SOFTWARE\\GRAMMAR\\PEG\\PLUGINS" .IP [12] the registry entry "HKEY_CURRENT_USER\\SOFTWARE\\GRAMMAR\\PLUGINS" .PP The last three are used only when the package is run on a machine using the Windows(tm) operating system\&. .PP The whole system is delivered with three predefined export plugins, namely .TP container See \fIPEG Export Plugin\&. To CONTAINER format\fR for details\&. .TP json See \fIPEG Export Plugin\&. To JSON format\fR for details\&. .TP peg See \fIPEG Export Plugin\&. To PEG format\fR for details\&. .PP .PP For readers wishing to write their own export plugin for some format, i\&.e\&. \fIplugin writer\fRs, reading and understanding the \fIParser Tools Export API\fR specification is an absolute necessity, as it documents the interaction between this package and its plugins in detail\&. .SH API .SS "PACKAGE COMMANDS" .TP \fB::pt::peg::export\fR \fIobjectName\fR This command creates a new export manager object with an associated Tcl command whose name is \fIobjectName\fR\&. This \fIobject\fR command is explained in full detail in the sections \fBObject command\fR and \fBObject methods\fR\&. The object command will be created under the current namespace if the \fIobjectName\fR is not fully qualified, and in the specified namespace otherwise\&. .PP .SS "OBJECT COMMAND" All objects created by the \fB::pt::peg::export\fR command have the following general form: .TP \fBobjectName\fR \fBmethod\fR ?\fIarg arg \&.\&.\&.\fR? The method \fBmethod\fR and its \fIarg\fR'uments determine the exact behavior of the command\&. See section \fBObject methods\fR for the detailed specifications\&. .PP .SS "OBJECT METHODS" .TP \fIobjectName\fR \fBdestroy\fR This method destroys the object it is invoked for\&. .TP \fIobjectName\fR \fBexport serial\fR \fIserial\fR ?\fIformat\fR? This method takes the canonical serialization of a parsing expression grammar stored in \fIserial\fR and converts it to the specified \fIformat\fR, using the export plugin for the format\&. This will fail with an error if no plugin could be found for the format\&. The string generated by the conversion process is returned as the result of this method\&. .sp If no format is specified the method defaults to \fBtext\fR\&. .sp The specification of what a \fIcanonical\fR serialization is can be found in the section \fBPEG serialization format\fR\&. .sp The plugin has to conform to the interface documented in the \fIParser Tools Export API\fR specification\&. .TP \fIobjectName\fR \fBexport object\fR \fIobject\fR ?\fIformat\fR? This method is a convenient wrapper around the \fBexport serial\fR method described by the previous item\&. It expects that \fIobject\fR is an object command supporting a \fBserialize\fR method returning the canonical serialization of a parsing expression grammar\&. It invokes that method, feeds the result into \fBexport serial\fR and returns the resulting string as its own result\&. .TP \fIobjectName\fR \fBconfiguration names\fR This method returns a list containing the names of all configuration options currently known to the object\&. .TP \fIobjectName\fR \fBconfiguration get\fR This method returns a dictionary containing the names and values of all configuration options currently known to the object\&. .TP \fIobjectName\fR \fBconfiguration set\fR \fIname\fR ?\fIvalue\fR? This method sets the configuration option \fIname\fR to the specified \fIvalue\fR and returns the new value of the option\&. .sp If no value is specified it simply returns the current value, without changing it\&. .sp Note that these configuration options and their values are simply passed to a plugin when the actual export is performed\&. It is the plugin which checks the validity, not the manager\&. .TP \fIobjectName\fR \fBconfiguration unset\fR \fIpattern\fR\&.\&.\&. This method unsets all configuration options matching the specified glob \fIpattern\fRs\&. If no pattern is specified it will unset all currently defined configuration options\&. .PP .SH "PEG SERIALIZATION FORMAT" Here we specify the format used by the Parser Tools to serialize Parsing Expression Grammars as immutable values for transport, comparison, etc\&. .PP We distinguish between \fIregular\fR and \fIcanonical\fR serializations\&. While a PEG may have more than one regular serialization only exactly one of them will be \fIcanonical\fR\&. .TP regular serialization .RS .IP [1] The serialization of any PEG is a nested Tcl dictionary\&. .IP [2] This dictionary holds a single key, \fBpt::grammar::peg\fR, and its value\&. This value holds the contents of the grammar\&. .IP [3] The contents of the grammar are a Tcl dictionary holding the set of nonterminal symbols and the starting expression\&. The relevant keys and their values are .RS .TP \fBrules\fR The value is a Tcl dictionary whose keys are the names of the nonterminal symbols known to the grammar\&. .RS .IP [1] Each nonterminal symbol may occur only once\&. .IP [2] The empty string is not a legal nonterminal symbol\&. .IP [3] The value for each symbol is a Tcl dictionary itself\&. The relevant keys and their values in this dictionary are .RS .TP \fBis\fR The value is the serialization of the parsing expression describing the symbols sentennial structure, as specified in the section \fBPE serialization format\fR\&. .TP \fBmode\fR The value can be one of three values specifying how a parser should handle the semantic value produced by the symbol\&. .RS .TP \fBvalue\fR The semantic value of the nonterminal symbol is an abstract syntax tree consisting of a single node node for the nonterminal itself, which has the ASTs of the symbol's right hand side as its children\&. .TP \fBleaf\fR The semantic value of the nonterminal symbol is an abstract syntax tree consisting of a single node node for the nonterminal, without any children\&. Any ASTs generated by the symbol's right hand side are discarded\&. .TP \fBvoid\fR The nonterminal has no semantic value\&. Any ASTs generated by the symbol's right hand side are discarded (as well)\&. .RE .RE .RE .TP \fBstart\fR The value is the serialization of the start parsing expression of the grammar, as specified in the section \fBPE serialization format\fR\&. .RE .IP [4] The terminal symbols of the grammar are specified implicitly as the set of all terminal symbols used in the start expression and on the RHS of the grammar rules\&. .RE .TP canonical serialization The canonical serialization of a grammar has the format as specified in the previous item, and then additionally satisfies the constraints below, which make it unique among all the possible serializations of this grammar\&. .RS .IP [1] The keys found in all the nested Tcl dictionaries are sorted in ascending dictionary order, as generated by Tcl's builtin command \fBlsort -increasing -dict\fR\&. .IP [2] The string representation of the value is the canonical representation of a Tcl dictionary\&. I\&.e\&. it does not contain superfluous whitespace\&. .RE .PP .SS EXAMPLE Assuming the following PEG for simple mathematical expressions .PP .CS PEG calculator (Expression) Digit <- '0'/'1'/'2'/'3'/'4'/'5'/'6'/'7'/'8'/'9' ; Sign <- '-' / '+' ; Number <- Sign? Digit+ ; Expression <- Term (AddOp Term)* ; MulOp <- '*' / '/' ; Term <- Factor (MulOp Factor)* ; AddOp <- '+'/'-' ; Factor <- '(' Expression ')' / Number ; END; .CE .PP then its canonical serialization (except for whitespace) is .PP .CS pt::grammar::peg { rules { AddOp {is {/ {t -} {t +}} mode value} Digit {is {/ {t 0} {t 1} {t 2} {t 3} {t 4} {t 5} {t 6} {t 7} {t 8} {t 9}} mode value} Expression {is {x {n Term} {* {x {n AddOp} {n Term}}}} mode value} Factor {is {/ {x {t (} {n Expression} {t )}} {n Number}} mode value} MulOp {is {/ {t *} {t /}} mode value} Number {is {x {? {n Sign}} {+ {n Digit}}} mode value} Sign {is {/ {t -} {t +}} mode value} Term {is {x {n Factor} {* {x {n MulOp} {n Factor}}}} mode value} } start {n Expression} } .CE .PP .SH "PE SERIALIZATION FORMAT" Here we specify the format used by the Parser Tools to serialize Parsing Expressions as immutable values for transport, comparison, etc\&. .PP We distinguish between \fIregular\fR and \fIcanonical\fR serializations\&. While a parsing expression may have more than one regular serialization only exactly one of them will be \fIcanonical\fR\&. .TP Regular serialization .RS .TP \fBAtomic Parsing Expressions\fR .RS .IP [1] The string \fBepsilon\fR is an atomic parsing expression\&. It matches the empty string\&. .IP [2] The string \fBdot\fR is an atomic parsing expression\&. It matches any character\&. .IP [3] The string \fBalnum\fR is an atomic parsing expression\&. It matches any Unicode alphabet or digit character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [4] The string \fBalpha\fR is an atomic parsing expression\&. It matches any Unicode alphabet character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [5] The string \fBascii\fR is an atomic parsing expression\&. It matches any Unicode character below U0080\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [6] The string \fBcontrol\fR is an atomic parsing expression\&. It matches any Unicode control character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [7] The string \fBdigit\fR is an atomic parsing expression\&. It matches any Unicode digit character\&. Note that this includes characters outside of the [0\&.\&.9] range\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [8] The string \fBgraph\fR is an atomic parsing expression\&. It matches any Unicode printing character, except for space\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [9] The string \fBlower\fR is an atomic parsing expression\&. It matches any Unicode lower-case alphabet character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [10] The string \fBprint\fR is an atomic parsing expression\&. It matches any Unicode printing character, including space\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [11] The string \fBpunct\fR is an atomic parsing expression\&. It matches any Unicode punctuation character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [12] The string \fBspace\fR is an atomic parsing expression\&. It matches any Unicode space character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [13] The string \fBupper\fR is an atomic parsing expression\&. It matches any Unicode upper-case alphabet character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [14] The string \fBwordchar\fR is an atomic parsing expression\&. It matches any Unicode word character\&. This is any alphanumeric character (see alnum), and any connector punctuation characters (e\&.g\&. underscore)\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [15] The string \fBxdigit\fR is an atomic parsing expression\&. It matches any hexadecimal digit character\&. This is a custom extension of PEs based on Tcl's builtin command \fBstring is\fR\&. .IP [16] The string \fBddigit\fR is an atomic parsing expression\&. It matches any decimal digit character\&. This is a custom extension of PEs based on Tcl's builtin command \fBregexp\fR\&. .IP [17] The expression [list t \fBx\fR] is an atomic parsing expression\&. It matches the terminal string \fBx\fR\&. .IP [18] The expression [list n \fBA\fR] is an atomic parsing expression\&. It matches the nonterminal \fBA\fR\&. .RE .TP \fBCombined Parsing Expressions\fR .RS .IP [1] For parsing expressions \fBe1\fR, \fBe2\fR, \&.\&.\&. the result of [list / \fBe1\fR \fBe2\fR \&.\&.\&. ] is a parsing expression as well\&. This is the \fIordered choice\fR, aka \fIprioritized choice\fR\&. .IP [2] For parsing expressions \fBe1\fR, \fBe2\fR, \&.\&.\&. the result of [list x \fBe1\fR \fBe2\fR \&.\&.\&. ] is a parsing expression as well\&. This is the \fIsequence\fR\&. .IP [3] For a parsing expression \fBe\fR the result of [list * \fBe\fR] is a parsing expression as well\&. This is the \fIkleene closure\fR, describing zero or more repetitions\&. .IP [4] For a parsing expression \fBe\fR the result of [list + \fBe\fR] is a parsing expression as well\&. This is the \fIpositive kleene closure\fR, describing one or more repetitions\&. .IP [5] For a parsing expression \fBe\fR the result of [list & \fBe\fR] is a parsing expression as well\&. This is the \fIand lookahead predicate\fR\&. .IP [6] For a parsing expression \fBe\fR the result of [list ! \fBe\fR] is a parsing expression as well\&. This is the \fInot lookahead predicate\fR\&. .IP [7] For a parsing expression \fBe\fR the result of [list ? \fBe\fR] is a parsing expression as well\&. This is the \fIoptional input\fR\&. .RE .RE .TP Canonical serialization The canonical serialization of a parsing expression has the format as specified in the previous item, and then additionally satisfies the constraints below, which make it unique among all the possible serializations of this parsing expression\&. .RS .IP [1] The string representation of the value is the canonical representation of a pure Tcl list\&. I\&.e\&. it does not contain superfluous whitespace\&. .IP [2] Terminals are \fInot\fR encoded as ranges (where start and end of the range are identical)\&. .RE .PP .PP .SS EXAMPLE Assuming the parsing expression shown on the right-hand side of the rule .PP .CS Expression <- Term (AddOp Term)* .CE .PP then its canonical serialization (except for whitespace) is .PP .CS {x {n Term} {* {x {n AddOp} {n Term}}}} .CE .PP .SH "BUGS, IDEAS, FEEDBACK" This document, and the package it describes, will undoubtedly contain bugs and other problems\&. Please report such in the category \fIpt\fR of the \fITcllib Trackers\fR [http://core\&.tcl\&.tk/tcllib/reportlist]\&. Please also report any ideas for enhancements you may have for either package and/or documentation\&. .PP When proposing code changes, please provide \fIunified diffs\fR, i\&.e the output of \fBdiff -u\fR\&. .PP Note further that \fIattachments\fR are strongly preferred over inlined patches\&. Attachments can be made by going to the \fBEdit\fR form of the ticket immediately after its creation, and then using the left-most button in the secondary navigation bar\&. .SH KEYWORDS EBNF, LL(k), PEG, TDPL, context-free languages, expression, grammar, matching, parser, parsing expression, parsing expression grammar, push down automaton, recursive descent, state, top-down parsing languages, transducer .SH CATEGORY Parsing and Grammars .SH COPYRIGHT .nf Copyright (c) 2009 Andreas Kupries .fi