.TH SG_ZONE "8" "May 2018" "sg3_utils\-1.43" SG3_UTILS
.SH NAME
sg_zone \- send SCSI OPEN, CLOSE, FINISH or SEQUENTIALIZE ZONE command
.SH SYNOPSIS
.B sg_zone
[\fI\-\-all\fR] [\fI\-\-close\fR] [\fI\-\-count=ZC\fR] [\fI\-\-finish\fR]
[\fI\-\-help\fR] [\fI\-\-open\fR] [\fI\-\-sequentialize\fR]
[\fI\-\-verbose\fR] [\fI\-\-version\fR] [\fI\-\-zone=ID\fR] \fIDEVICE\fR
.SH DESCRIPTION
.\" Add any additional description here
.PP
Sends a SCSI OPEN ZONE, CLOSE ZONE, FINISH ZONE or SEQUENTIALIZE ZONE
command to the \fIDEVICE\fR. All but the last are found in the soon to
be released ZBC standard (close to draft ZBC BSR INCITS 536 revision 05).
The SEQUENTIALIZE ZONE command was added in zbc2r01b.
.PP
One and only one of the \fI\-\-open\fR, \fI\-\-close\fR, \fI\-\-finish\fR
and \fI\-\-sequentialize\fR options can be chosen.
.SH OPTIONS
Arguments to long options are mandatory for short options as well.
.TP
\fB\-a\fR, \fB\-\-all\fR
sets the ALL field in the cdb.
.TP
\fB\-c\fR, \fB\-\-close\fR
causes the CLOSE ZONE command to be sent to the \fIDEVICE\fR.
.TP
\fB\-C\fR, \fB\-\-count\fR=\fIZC\fR
ZC is placed in the Zone Count field in the cdb of all four commands
supported by this utility. ZC should be a value from 0 to 65535 (0xffff)
inclusive.
.TP
\fB\-f\fR, \fB\-\-finish\fR
causes the FINISH ZONE command to be sent to the \fIDEVICE\fR.
.TP
\fB\-h\fR, \fB\-\-help\fR
output the usage message then exit.
.TP
\fB\-o\fR, \fB\-\-open\fR
causes the OPEN ZONE command to be sent to the \fIDEVICE\fR.
.TP
\fB\-S\fR, \fB\-\-sequentialize\fR
causes the SEQUENTIALIZE ZONE command to be sent to the \fIDEVICE\fR.
.TP
\fB\-v\fR, \fB\-\-verbose\fR
increase the level of verbosity, (i.e. debug output).
.TP
\fB\-V\fR, \fB\-\-version\fR
print the version string and then exit.
.TP
\fB\-z\fR, \fB\-\-zone\fR=\fIID\fR
where \fIID\fR is placed in the cdb's ZONE ID field. A zone id is a zone
start logical block address (LBA). The default value is 0. \fIID\fR is
assumed to be in decimal unless prefixed with '0x' or has a trailing 'h'
which indicate hexadecimal.
.SH EXIT STATUS
The exit status of sg_zone is 0 when it is successful. Otherwise see
the sg3_utils(8) man page.
.SH AUTHORS
Written by Douglas Gilbert.
.SH "REPORTING BUGS"
Report bugs to <dgilbert at interlog dot com>.
.SH COPYRIGHT
Copyright \(co 2014\-2018 Douglas Gilbert
.br
This software is distributed under a FreeBSD license. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
.SH "SEE ALSO"
.B sg_rep_zones,sg_reset_wp(sg3_utils)