table of contents
- bullseye 1.17-1
- bullseye-backports 1.23-1~bpo11+1
- unstable 1.25-1
scrcpy(1) | General Commands Manual | scrcpy(1) |
NAME¶
scrcpy - Display and control your Android device
SYNOPSIS¶
scrcpy [options]
DESCRIPTION¶
scrcpy provides display and control of Android devices connected on USB (or over TCP/IP). It does not require any root access.
OPTIONS¶
- --always-on-top
- Make scrcpy window always on top (above other windows).
- -b, --bit-rate value
- Encode the video at the given bit-rate, expressed in bits/s. Unit suffixes
are supported: 'K' (x1000) and 'M' (x1000000).
Default is 8000000.
- --codec-options key[:type]=value[,...]
- Set a list of comma-separated key:type=value options for the device
encoder.
The possible values for 'type' are 'int' (default), 'long', 'float' and 'string'.
The list of possible codec options is available in the Android documentation https://d.android.com/reference/android/media/MediaFormat.
- --crop width:height:x:y
- Crop the device screen on the server.
The values are expressed in the device natural orientation (typically, portrait for a phone, landscape for a tablet). Any --max-size value is computed on the cropped size.
- --disable-screensaver
- Disable screensaver while scrcpy is running.
- --display id
- Specify the display id to mirror.
The list of possible display ids can be listed by "adb shell dumpsys display" (search "mDisplayId=" in the output).
Default is 0.
- --encoder name
- Use a specific MediaCodec encoder (must be a H.264 encoder).
- --force-adb-forward
- Do not attempt to use "adb reverse" to connect to the device.
- --forward-all-clicks
- By default, right-click triggers BACK (or POWER on) and middle-click triggers HOME. This option disables these shortcuts and forward the clicks to the device instead.
- -f, --fullscreen
- Start in fullscreen.
- -h, --help
- Print this help.
- --legacy-paste
- Inject computer clipboard text as a sequence of key events on Ctrl+v (like
MOD+Shift+v).
This is a workaround for some devices not behaving as expected when setting the device clipboard programmatically.
- --lock-video-orientation value
- Lock video orientation to value. Possible values are -1 (unlocked),
0, 1, 2 and 3. Natural device orientation is 0, and each increment adds a
90 degrees otation counterclockwise.
Default is -1 (unlocked).
- --max-fps value
- Limit the framerate of screen capture (officially supported since Android 10, but may work on earlier versions).
- -m, --max-size value
- Limit both the width and height of the video to value. The other
dimension is computed so that the device aspect-ratio is preserved.
Default is 0 (unlimited).
- -n, --no-control
- Disable device control (mirror the device in read-only).
- -N, --no-display
- Do not display device (only when screen recording is enabled).
- --no-key-repeat
- Do not forward repeated key events when a key is held down.
- --no-mipmaps
- If the renderer is OpenGL 3.0+ or OpenGL ES 2.0+, then mipmaps are automatically generated to improve downscaling quality. This option disables the generation of mipmaps.
- -p, --port port[:port]
- Set the TCP port (range) used by the client to listen.
Default is 27183:27199.
- --prefer-text
- Inject alpha characters and space as text events instead of key events.
This avoids issues when combining multiple keys to enter special characters, but breaks the expected behavior of alpha keys in games (typically WASD).
- --push-target path
- Set the target directory for pushing files to the device by drag &
drop. It is passed as-is to "adb push".
Default is "/sdcard/".
- -r, --record file
- Record screen to file.
The format is determined by the --record-format option if set, or by the file extension (.mp4 or .mkv).
- --record-format format
- Force recording format (either mp4 or mkv).
- --render-driver name
- Request SDL to use the given render driver (this is just a hint).
Supported names are currently "direct3d", "opengl", "opengles2", "opengles", "metal" and "software".
- --render-expired-frames
- By default, to minimize latency, scrcpy always renders the last available decoded frame, and drops any previous ones. This flag forces to render all frames, at a cost of a possible increased latency.
- --rotation value
- Set the initial display rotation. Possibles values are 0, 1, 2 and 3. Each increment adds a 90 degrees rotation counterclockwise.
- -s, --serial number
- The device serial number. Mandatory only if several devices are connected to adb.
- --shortcut-mod key[+...]][,...]
- Specify the modifiers to use for scrcpy shortcuts. Possible keys are
"lctrl", "rctrl", "lalt", "ralt",
"lsuper" and "rsuper".
A shortcut can consist in several keys, separated by '+'. Several shortcuts can be specified, separated by ','.
For example, to use either LCtrl+LAlt or LSuper for scrcpy shortcuts, pass "lctrl+lalt,lsuper".
Default is "lalt,lsuper" (left-Alt or left-Super).
- -S, --turn-screen-off
- Turn the device screen off immediately.
- -t, --show-touches
- Enable "show touches" on start, restore the initial value on
exit.
It only shows physical touches (not clicks from scrcpy).
- -v, --version
- Print the version of scrcpy.
- -V, --verbosity value
- Set the log level ("debug", "info", "warn"
or "error").
Default is "info" for release builds, "debug" for debug builds.
- -w, --stay-awake
- Keep the device on while scrcpy is running, when the device is plugged in.
- --window-borderless
- Disable window decorations (display borderless window).
- --window-title text
- Set a custom window title.
- --window-x value
- Set the initial window horizontal position.
Default is "auto".
- --window-y value
- Set the initial window vertical position.
Default is "auto".
- --window-width value
- Set the initial window width.
Default is 0 (automatic).
- --window-height value
- Set the initial window height.
Default is 0 (automatic).
SHORTCUTS¶
In the following list, MOD is the shortcut modifier. By default, it's (left) Alt or (left) Super, but it can be configured by --shortcut-mod (see above).
- MOD+f
- Switch fullscreen mode
- MOD+Left
- Rotate display left
- MOD+Right
- Rotate display right
- MOD+g
- Resize window to 1:1 (pixel-perfect)
- MOD+w, Double-click on black borders
- Resize window to remove black borders
- MOD+h, Home, Middle-click
- Click on HOME
- MOD+b, MOD+Backspace, Right-click (when screen is on)
- Click on BACK
- MOD+s
- Click on APP_SWITCH
- MOD+m
- Click on MENU
- MOD+Up
- Click on VOLUME_UP
- MOD+Down
- Click on VOLUME_DOWN
- MOD+p
- Click on POWER (turn screen on/off)
- Right-click (when screen is off)
- Turn screen on
- MOD+o
- Turn device screen off (keep mirroring)
- MOD+Shift+o
- Turn device screen on
- MOD+r
- Rotate device screen
- MOD+n
- Expand notification panel
- MOD+Shift+n
- Collapse notification panel
- Mod+c
- Copy to clipboard (inject COPY keycode, Android >= 7 only)
- Mod+x
- Cut to clipboard (inject CUT keycode, Android >= 7 only)
- MOD+v
- Copy computer clipboard to device, then paste (inject PASTE keycode, Android >= 7 only)
- MOD+Shift+v
- Inject computer clipboard text as a sequence of key events
- MOD+i
- Enable/disable FPS counter (print frames/second in logs)
- Ctrl+click-and-move
- Pinch-to-zoom from the center of the screen
- Drag & drop APK file
- Install APK from computer
Environment variables¶
- ADB
- Specify the path to adb.
- SCRCPY_SERVER_PATH
- Specify the path to server binary.
AUTHORS¶
scrcpy is written by Romain Vimont.
This manual page was written by Yangfl for the Debian Project (and may be used by others).
REPORTING BUGS¶
Report bugs to https://github.com/Genymobile/scrcpy/issues.
COPYRIGHT¶
Copyright © 2018 Genymobile Genymobile
Copyright © 2018-2020 Romain Vimont
Licensed under the Apache License, Version 2.0.