Scroll to navigation

NEWUSERS(8) Comandi per la gestione del si NEWUSERS(8)

NOME

newusers - aggiorna e crea nuovi utenti in blocco

SINOSSI

newusers [opzioni] [file]

DESCRIZIONE

The newusers command reads a file (or the standard input by default) and uses this information to update a set of existing users or to create new users. Each line is in the same format as the standard password file (see passwd(5)) with the exceptions explained below:

pw_name:pw_passwd:pw_uid:pw_gid:pw_gecos:pw_dir:pw_shell

pw_name

Il nome dell'utente.

It can be the name of a new user or the name of an existing user (or a user created before by newusers). In case of an existing user, the user's information will be changed, otherwise a new user will be created.

pw_passwd

Questo campo verrà cifrato e utilizzato come nuovo valore per la password cifrata.

pw_uid

Definisce l'UID dell'utente.

If the field is empty, a new (unused) UID will be defined automatically by newusers.

Se questo campo contiene un numero, verrà utilizzato come UID.

If this field contains the name of an existing user (or the name of a user created before by newusers), the UID of the specified user will be used.

Se viene cambiato l'UID di un utente esistente, la proprietà dei file di proprietà dell'utente stesso andrà cambiata manualmente.

pw_gid

Definisce il l'ID del gruppo primario dell'utente.

If this field contains the name of an existing group (or a group created before by newusers), the GID of this group will be used as the primary group ID for the user.

Se questo campo è numerico, questo numero verrà utilizzato come ID del gruppo primario dell'utente. Se non esiste nessun gruppo con quel GID, ne viene creato uno con il nome dell'utente e il GID specificato.

If this field is empty, a new group will be created with the name of the user and a GID will be automatically defined by newusers to be used as the primary group ID for the user and as the GID for the new group.

If this field contains the name of a group which does not exist (and was not created before by newusers), a new group will be created with the specified name and a GID will be automatically defined by newusers to be used as the primary group ID for the user and GID for the new group.

pw_gecos

Questo campo viene copiato nel campo GECOS dell'utente.

pw_dir

Questo campo è utilizzato per impostare la directory home dell'utente.

Se questo campo non contiene il nome di una directory esistente la directory viene creata, assegnandone la proprietà all'utente che si sta definendo o aggiornando e al suo gruppo primario.

If the home directory of an existing user is changed, newusers does not move or copy the content of the old directory to the new location. This should be done manually.

pw_shell

Questo campo definisce la shell dell'utente. Su questo campo non viene fatto nessun controllo.

newusers first tries to create or change all the specified users, and then write these changes to the user or group databases. If an error occurs (except in the final writes to the databases), no changes are committed to the databases.

Durante il primo passaggio gli utenti vengono creati con la password bloccata (e le password non sono modificate nel caso di utenti che non sono creati). Un secondo passaggio si occupa di aggiornare tutte le password usando PAM. I problemi durante l'aggiornamento delle password sono riportati, ma non interrompono la modifica delle altre password.

Questo comando è appositamente pensato per grossi sistemi nei quali molti account sono aggiornati allo stesso tempo.

OPZIONI

The options which apply to the newusers command are:

--badname 

Allow names that do not conform to standards.

-h, --help

Mostra un messaggio di aiuto ed esce.

-r, --system

Crea un account di sistema.

System users will be created with no aging information in /etc/shadow, and their numeric identifiers are chosen in the SYS_UID_MIN-SYS_UID_MAX range, defined in login.defs, instead of UID_MIN-UID_MAX (and their GID counterparts for the creation of groups).

-R, --root CHROOT_DIR

Apply changes in the CHROOT_DIR directory and use the configuration files from the CHROOT_DIR directory.

AVVISI/CAVEAT

Il file di input deve essere protetto poiché contiene password non cifrate.

CONFIGURAZIONE

The following configuration variables in /etc/login.defs change the behavior of this tool:

GID_MAX (number), GID_MIN (number)

Range of group IDs used for the creation of regular groups by useradd, groupadd, or newusers.

The default value for GID_MIN (resp. GID_MAX) is 1000 (resp. 60000).

HOME_MODE (number)

The mode for new home directories. If not specified, the UMASK is used to create the mode.

useradd and newusers use this to set the mode of the home directory they create.

MAX_MEMBERS_PER_GROUP (number)

Maximum members per group entry. When the maximum is reached, a new group entry (line) is started in /etc/group (with the same name, same password, and same GID).

Il valore predefinito è 0, che non pone nessun limite al numero di membri per gruppo.

Questa opzione (dividi gruppo) permette di limitare la lunghezza delle righe nel file «group». Questo è utile per essere certi che le righe per gruppi NIS non eccedano i 1024 caratteri.

Se si deve impostare questo limite, si può usare 25.

Nota: la divisione dei gruppi potrebbe non essere supportata da ogni strumento (anche all'interno del pacchetto Shadow). Non si dovrebbe utilizzare questa variabile a meno di esserci forzati.

PASS_MAX_DAYS (number)

Il numero massimo di giorni che una password può essere utilizzata. Se la password è più vecchia verrà imposto il suo cambiamento. Se non specificato viene assunto -1 (che disabilita questo controllo).

PASS_MIN_DAYS (number)

Il numero minimo di giorni tra due cambiamenti di password. Ogni tentativo di cambiare la password prima di questo periodo verrà rifiutato. Se non specificato viene assunto -1 (che disabilita questo controllo).

PASS_WARN_AGE (number)

Il numero di giorni per i quali un utente va avvisato che la sua password sta per scadere. Se zero l'utente viene avvisato solo alla scadenza. Un valore negativo indica che non si deve avvisare mai. Se non specificato allora non c'è nessun avviso.

SUB_GID_MIN (number), SUB_GID_MAX (number), SUB_GID_COUNT (number)

If /etc/subuid exists, the commands useradd and newusers (unless the user already have subordinate group IDs) allocate SUB_GID_COUNT unused group IDs from the range SUB_GID_MIN to SUB_GID_MAX for each new user.

The default values for SUB_GID_MIN, SUB_GID_MAX, SUB_GID_COUNT are respectively 100000, 600100000 and 65536.

SUB_UID_MIN (number), SUB_UID_MAX (number), SUB_UID_COUNT (number)

If /etc/subuid exists, the commands useradd and newusers (unless the user already have subordinate user IDs) allocate SUB_UID_COUNT unused user IDs from the range SUB_UID_MIN to SUB_UID_MAX for each new user.

The default values for SUB_UID_MIN, SUB_UID_MAX, SUB_UID_COUNT are respectively 100000, 600100000 and 65536.

SYS_GID_MAX (number), SYS_GID_MIN (number)

Range of group IDs used for the creation of system groups by useradd, groupadd, or newusers.

The default value for SYS_GID_MIN (resp. SYS_GID_MAX) is 101 (resp. GID_MIN-1).

SYS_UID_MAX (number), SYS_UID_MIN (number)

Range of user IDs used for the creation of system users by useradd or newusers.

The default value for SYS_UID_MIN (resp. SYS_UID_MAX) is 101 (resp. UID_MIN-1).

UID_MAX (number), UID_MIN (number)

Range of user IDs used for the creation of regular users by useradd or newusers.

The default value for UID_MIN (resp. UID_MAX) is 1000 (resp. 60000).

UMASK (number)

La maschera di permessi alla creazione dei file è inizializzata con questo valore. Se non specificato la maschera viene impostata a 022.

useradd and newusers use this mask to set the mode of the home directory they create if HOME_MODE is not set.

It is also used by pam_umask as the default umask value.

FILE

/etc/passwd

Informazioni sugli account utente.

/etc/shadow

Informazioni sicure sugli account utente.

/etc/group

Informazioni sugli account di gruppo.

/etc/gshadow

Informazioni sicure sugli account di gruppo.

/etc/login.defs

Configurazione del pacchetto password shadow

/etc/pam.d/newusers

PAM configuration for newusers.

/etc/subgid

Per user subordinate group IDs.

/etc/subuid

Per user subordinate user IDs.

VEDERE ANCHE

login.defs(5), passwd(1), subgid(5), subuid(5), useradd(8).

07/02/2020 shadow-utils 4.8.1