.\" .\" *********************************************************************
.\" .\" *                                                                   *
.\" .\" *             Copyright 2015-2019, Intel Corporation                *
.\" .\" *                                                                   *
.\" .\" *                       All Rights Reserved.                        *
.\" .\" *                                                                   *
.\" .\" *********************************************************************

.TH opaextractstat 8 "Intel Corporation" "Copyright(C) 2015\-2019" "IFSFFCLIRG (Man Page)"
.SH NAME
opaextractstat


.PP
Performs an error analysis of a fabric and provides augmented information from a topology\(ulfile. The report provides cable information as well as symbol error counts.
.PP
opaextractstat generates a detailed opareport errors report that also has a topology file (see
\fIopareport\fR
for more information about topology files). The report is piped to opaxmlextract which extracts values for Link, Cable and Port. (The port element names are context-sensitive.) Note that opaxmlextract generates two extraction records for each link (one for each port on the link); therefore, opaextractstat merges the two records into a single record and removes redundant link and cable information.
.PP
opaextractstat contains a while read loop that reads the CSV line-by-line, uses cut to remove redundant information, and outputs the data on a common line.
.SH Syntax
opaextractstat topology\(ulfile [opareport  \fIoptions\fR]
.SH Options

.TP 10
--help

Produces full help text.

.TP 10
topology\(ulfile

Specifies topology\(ulfile to use.

.TP 10
opareport \fIoptions\fR

The following options are passed to opareport. This subset is considered typical and useful for this command. By design, the tool ignores -o/--output report option.

.RS
.TP 10

.sp
-h/--hfi \fIhfi\fR
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p \fIport\fR port is a system-wide port number. Default is 0.

.RE

.RS
.TP 10

.sp
-p/--port \fIport\fR
Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.

.RE

.RS
.TP 10

.sp
-X/--infile \fIsnapshot\(ulinput\fR
Generates a report using the data in the snapshot\(ulinput file. snapshot\(ulinput must have been generated during a previous -o \fIsnapshot\fR run. When used, the -s, -i, -C, and -a options are ignored. \[aq]-\[aq] may be used as the snapshot\(ulinput to specify stdin.

.RE

.RS
.TP 10

.sp
-i/--interval \fIseconds\fR
Obtains performance statistics over interval \fIseconds\fR. Clears all statistics, waits interval \fIseconds\fR, then generates report. Implies -s option.

.RE

.RS
.TP 10

.sp
-b / --begin \fIdate\(ultime\fR
Obtains past performance stats over an interval beginning at \fIdate\(ultime\fR. Implies -s option. \fIdate\(ultime\fR may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.

.RE

.RS
.TP 10

.sp
-e / --end \fIdate\(ultime\fR
Obtains past performance stats over an interval ending at \fIdate\(ultime\fR. Implies -s option.

.IP
\fIdate\(ultime\fR may be a time entered as HH:MM[:SS] or date as mm/dd/YYYY, dd.mm.YYYY, YYYY-mm-dd or date followed by time; for example, "2016-07-04 14:40". Relative times are taken as "x [second|minute|hour|day](s) ago.
.RE

.RS
.TP 10

.sp
-C/--clear
Clears performance statistics for all ports. Only statistics with error thresholds are cleared. A clear occurs after generating the report.

.RE

.RS
.TP 10

.sp
-a/--clearall
Clears all performance statistics for all ports.

.RE

.RS
.TP 10

.sp
-M/--pmadirect
Accesses performance statistics using direct PMA.

.RE

.RS
.TP 10

.sp
-A/--allports
Gets PortInfo for down switch ports. Uses direct SMA to get this data. If used with -M, also gets PMA stats for down switch ports.

.RE

.RS
.TP 10

.sp
-c/--config \fIfile\fR
Specifies the error thresholds configuration file. Default is /etc/opa/opamon.conf file.

.RE

.RS
.TP 10

.sp
-L/--limit
Limits operation to exact specified focus with -F for port error counters check (-o \fIerrors\fR) and port counters clear (-C or -i). Normally, the neighbor of each selected port is also checked/cleared. Does not affect other reports.

.RE

.RS
.TP 10

.sp
-F/--focus \fIpoint\fR
Specifies the focus area for report. Used for all reports except route to limit scope of report. Refer to
\fIPoint Syntax\fR
for details.

.RE


.SH -h and -p options permit a variety of selections:

.TP 10
-h 0

First active port in system (Default).

.TP 10
-h 0 -p 0

First active port in system.

.TP 10
-h \fIx\fR

First active port on HFI \fIx\fR.

.TP 10
-h \fIx\fR \fI\fR-p 0

First active port on HFI \fIx\fR.

.TP 10
-h 0 -p \fIy\fR

Port \fIy\fR within system (no matter which ports are active).

.TP 10
-h \fIx\fR \fI\fR-p \fIy\fR

HFI \fIx\fR, port \fIy\fR.


.SH Point Syntax

.TP 10
gid:\fIvalue\fR

\fIvalue\fR is numeric port GID of form: subnet:guid.

.TP 10
lid:\fIvalue\fR

\fIvalue\fR is numeric LID.

.TP 10
lid:value:node

\fIvalue\fR is numeric LID, selects entire node with given LID.

.TP 10
lid:\fIvalue\fR:port:\fIvalue2\fR

\fIvalue\fR is numeric LID of node, \fIvalue2\fR is port number.

.TP 10
portguid:\fIvalue\fR

\fIvalue\fR is numeric port GUID.

.TP 10
nodeguid:\fIvalue\fR

\fIvalue\fR is numeric node GUID.

.TP 10
nodeguid:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is numeric node GUID, \fIvalue2\fR is port number.

.TP 10
iocguid:\fIvalue\fR

\fIvalue\fR is numeric IOC GUID.

.TP 10
iocguid:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is numeric IOC GUID, \fIvalue2\fR is port number.

.TP 10
systemguid:\fIvalue\fR

\fIvalue\fR is numeric system image GUID.

.TP 10
systemguid:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is the numeric system image GUID, \fIvalue2\fR is port number.

.TP 10
ioc:\fIvalue\fR

\fIvalue\fR is IOC Profile ID String (IOC Name).

.TP 10
ioc:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is IOC Profile ID String (IOC Name), \fIvalue2\fR is port number.

.TP 10
iocpat:\fIvalue\fR

\fIvalue\fR is glob pattern for IOC Profile ID String (IOC Name).

.TP 10
iocpat:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is glob pattern for IOC Profile ID String (IOC Name), \fIvalue2\fR is port number.

.TP 10
ioctype:\fIvalue\fR

\fIvalue\fR is IOC type (SRP or OTHER).

.TP 10
ioctype:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is IOC type (SRP or OTHER); \fIvalue2\fR is port number.

.TP 10
node:\fIvalue\fR

\fIvalue\fR is node description (node name).

.TP 10
node:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is node description (node name), \fIvalue2\fR is port number.

.TP 10
nodepat:\fIvalue\fR

\fIvalue\fR is glob pattern for node description (node name).

.TP 10
nodepat:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is the glob pattern for the node description (node name), \fIvalue2\fR is port number.

.TP 10
nodedetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for node details.

.TP 10
nodedetpat:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is the glob pattern for the node details, \fIvalue2\fR is port number.

.TP 10
nodetype:\fIvalue\fR

\fIvalue\fR is node type (SW or FI).

.TP 10
nodetype:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is node type (SW or FI), \fIvalue2\fR is port number.

.TP 10
rate:\fIvalue\fR

\fIvalue\fR is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.

.TP 10
portstate:\fIvalue\fR

\fIvalue\fR is a string for state (down, init, armed, active, notactive, initarmed).

.TP 10
portphysstate:\fIvalue\fR

\fIvalue\fR is a string for PHYs state (polling, disabled, training, linkup, recovery, offline, test)

.TP 10
mtucap:\fIvalue\fR

\fIvalue\fR is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.

.TP 10
labelpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable label.

.TP 10
lengthpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable length.

.TP 10
cabledetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable details.

.TP 10
cabinflenpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info length.

.TP 10
cabinfvendnamepat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor name.

.TP 10
cabinfvendpnpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor part number.

.TP 10
cabinfvendrevpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor revision.

.TP 10
cabinfvendsnpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor serial number.

.TP 10
cabinftype:\fIvalue\fR

\fIvalue\fR is either optical, passive\(ulcopper, active\(ulcopper, or unknown.

.TP 10
linkdetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for link details.

.TP 10
portdetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for port details.

.TP 10
sm

Specifies the master subnet manager (SM).

.TP 10
smdetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for SM details.

.TP 10
route:\fIpoint1\fR:\fIpoint2\fR

Specifies all ports along the routes between the two given points.

.TP 10
led:\fIvalue\fR

\fIvalue\fR is either on or off for LED port beacon.

.TP 10
linkqual:\fIvalue\fR

Specifies the ports with a link quality equal to \fIvalue\fR.

.TP 10
linkqualLE:\fIvalue\fR

Specifies the ports with a link quality less than or equal to \fIvalue\fR.

.TP 10
linkqualGE:\fIvalue\fR

Specifies the ports with a link quality greater than or equal to \fIvalue\fR.

.TP 10
nodepatfile:\fIFILENAME\fR

Specifies the name of file with the list of nodepats or node descriptions.

.TP 10
nodepairpatfile:\fIFILENAME\fR

Specifies the name of file with the list of node pairs, separated by a colon.

.TP 10
ldr

Specifies the ports with a non-zero link down reason or neighbor link down reason.

.TP 10
ldr:\fIvalue\fR

Specifies the ports with a link down reason or neighbor link down reason equal to \fIvalue\fR.


.PP
The portion of the script that calls opareport and opaxmlextract follows:
.PP

.br
opareport -x -d 10 -s -o errors -T $@ | opaxmlextract -d \;
.br

-e Rate -e MTU -e LinkDetails -e CableLength -e CableLabel
.br

-e CableDetails -e Port.NodeDesc -e Port.PortNum -e SymbolErrors.Value

.br

.SH Examples
opaextractstat topology\(ulfile
.br

opaextractstat topology\(ulfile -c my\(ulopamon.conf