.\" .\" *********************************************************************
.\" .\" *                                                                   *
.\" .\" *             Copyright 2015-2019, Intel Corporation                *
.\" .\" *                                                                   *
.\" .\" *                       All Rights Reserved.                        *
.\" .\" *                                                                   *
.\" .\" *********************************************************************

.TH opaextractsellinks 8 "Intel Corporation" "Copyright(C) 2015\-2019" "IFSFFCLIRG (Man Page)"
.SH NAME
opaextractsellinks


.PP
Produces a CSV file listing all or some of the links in the fabric. opaextractsellinks is a front end to the opareport tool. The output from this tool can be imported into a spreadsheet or parsed by other scripts.
.SH Syntax
opaextractsellinks [opareport  \fIoptions\fR]
.SH Options

.TP 10
--help

Produces full help text.

.TP 10
opareport \fIoptions\fR

The following options are passed to opareport. This subset is considered typical and useful for this command. By design, the tool ignores -o/--output report option.

.RS
.TP 10

.sp
-h/--hfi \fIhfi\fR
Specifies the HFI, numbered 1..n. Using 0 specifies that the -p \fIport\fR port is a system-wide port number. Default is 0.

.RE

.RS
.TP 10

.sp
-p/--port \fIport\fR
Specifies the port, numbered 1..n. Using 0 specifies the first active port. Default is 0.

.RE

.RS
.TP 10

.sp
-X/--infile \fIsnapshot\(ulinput\fR
Generates a report using the data in the snapshot\(ulinput file. snapshot\(ulinput must have been generated during a previous -o \fIsnapshot\fR run. When used, the -s, -i, -C, and -a options are ignored. \[aq]-\[aq] may be used as the snapshot\(ulinput to specify stdin.

.RE

.RS
.TP 10

.sp
-T/--topology \fItopology\(ulinput\fR
Uses topology\(ulinput file to augment and verify fabric information. When used, various reports can be augmented with information not available electronically (such as cable labels). \[aq]-\[aq] may be used to specify stdin.

.RE

.RS
.TP 10

.sp
-F/--focus \fIpoint\fR
Specifies the focus area for report. Used for all reports except route to limit scope of report. Refer to
\fIPoint Syntax\fR
for details.

.RE


.SH -h and -p options permit a variety of selections:

.TP 10
-h 0

First active port in system (Default).

.TP 10
-h 0 -p 0

First active port in system.

.TP 10
-h \fIx\fR

First active port on HFI \fIx\fR.

.TP 10
-h \fIx\fR \fI\fR-p 0

First active port on HFI \fIx\fR.

.TP 10
-h 0 -p \fIy\fR

Port \fIy\fR within system (no matter which ports are active).

.TP 10
-h \fIx\fR \fI\fR-p \fIy\fR

HFI \fIx\fR, port \fIy\fR.


.SH Point Syntax

.TP 10
gid:\fIvalue\fR

\fIvalue\fR is numeric port GID of form: subnet:guid.

.TP 10
lid:\fIvalue\fR

\fIvalue\fR is numeric LID.

.TP 10
lid:value:node

\fIvalue\fR is numeric LID, selects entire node with given LID.

.TP 10
lid:\fIvalue\fR:port:\fIvalue2\fR

\fIvalue\fR is numeric LID of node, \fIvalue2\fR is port number.

.TP 10
portguid:\fIvalue\fR

\fIvalue\fR is numeric port GUID.

.TP 10
nodeguid:\fIvalue\fR

\fIvalue\fR is numeric node GUID.

.TP 10
nodeguid:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is numeric node GUID, \fIvalue2\fR is port number.

.TP 10
iocguid:\fIvalue\fR

\fIvalue\fR is numeric IOC GUID.

.TP 10
iocguid:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is numeric IOC GUID, \fIvalue2\fR is port number.

.TP 10
systemguid:\fIvalue\fR

\fIvalue\fR is numeric system image GUID.

.TP 10
systemguid:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is the numeric system image GUID, \fIvalue2\fR is port number.

.TP 10
ioc:\fIvalue\fR

\fIvalue\fR is IOC Profile ID String (IOC Name).

.TP 10
ioc:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is IOC Profile ID String (IOC Name), \fIvalue2\fR is port number.

.TP 10
iocpat:\fIvalue\fR

\fIvalue\fR is glob pattern for IOC Profile ID String (IOC Name).

.TP 10
iocpat:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is glob pattern for IOC Profile ID String (IOC Name), \fIvalue2\fR is port number.

.TP 10
ioctype:\fIvalue\fR

\fIvalue\fR is IOC type (SRP or OTHER).

.TP 10
ioctype:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is IOC type (SRP or OTHER); \fIvalue2\fR is port number.

.TP 10
node:\fIvalue\fR

\fIvalue\fR is node description (node name).

.TP 10
node:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is node description (node name), \fIvalue2\fR is port number.

.TP 10
nodepat:\fIvalue\fR

\fIvalue\fR is glob pattern for node description (node name).

.TP 10
nodepat:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is the glob pattern for the node description (node name), \fIvalue2\fR is port number.

.TP 10
nodedetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for node details.

.TP 10
nodedetpat:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is the glob pattern for the node details, \fIvalue2\fR is port number.

.TP 10
nodetype:\fIvalue\fR

\fIvalue\fR is node type (SW or FI).

.TP 10
nodetype:\fIvalue1\fR:port:\fIvalue2\fR

\fIvalue1\fR is node type (SW or FI), \fIvalue2\fR is port number.

.TP 10
rate:\fIvalue\fR

\fIvalue\fR is string for rate (25g, 50g, 75g, 100g), omits switch mgmt port 0.

.TP 10
portstate:\fIvalue\fR

\fIvalue\fR is a string for state (down, init, armed, active, notactive, initarmed).

.TP 10
portphysstate:\fIvalue\fR

\fIvalue\fR is a string for PHYs state (polling, disabled, training, linkup, recovery, offline, test)

.TP 10
mtucap:\fIvalue\fR

\fIvalue\fR is MTU size (2048, 4096, 8192, 10240), omits switch mgmt port 0.

.TP 10
labelpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable label.

.TP 10
lengthpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable length.

.TP 10
cabledetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable details.

.TP 10
cabinflenpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info length.

.TP 10
cabinfvendnamepat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor name.

.TP 10
cabinfvendpnpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor part number.

.TP 10
cabinfvendrevpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor revision.

.TP 10
cabinfvendsnpat:\fIvalue\fR

\fIvalue\fR is glob pattern for cable info vendor serial number.

.TP 10
cabinftype:\fIvalue\fR

\fIvalue\fR is either optical, passive\(ulcopper, active\(ulcopper, or unknown.

.TP 10
linkdetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for link details.

.TP 10
portdetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for port details.

.TP 10
sm

Specifies the master subnet manager (SM).

.TP 10
smdetpat:\fIvalue\fR

\fIvalue\fR is glob pattern for SM details.

.TP 10
route:\fIpoint1\fR:\fIpoint2\fR

Specifies all ports along the routes between the two given points.

.TP 10
led:\fIvalue\fR

\fIvalue\fR is either on or off for LED port beacon.

.TP 10
linkqual:\fIvalue\fR

Specifies the ports with a link quality equal to \fIvalue\fR.

.TP 10
linkqualLE:\fIvalue\fR

Specifies the ports with a link quality less than or equal to \fIvalue\fR.

.TP 10
linkqualGE:\fIvalue\fR

Specifies the ports with a link quality greater than or equal to \fIvalue\fR.

.TP 10
nodepatfile:\fIFILENAME\fR

Specifies the name of file with the list of nodepats or node descriptions.

.TP 10
nodepairpatfile:\fIFILENAME\fR

Specifies the name of file with the list of node pairs, separated by a colon.

.TP 10
ldr

Specifies the ports with a non-zero link down reason or neighbor link down reason.

.TP 10
ldr:\fIvalue\fR

Specifies the ports with a link down reason or neighbor link down reason equal to \fIvalue\fR.

.SH Examples
# List all the links in the fabric:
.br

opaextractsellinks
.br


.br

# List all the links to a switch named "coresw1":
.br

opaextractsellinks -F "node:coresw1"
.br


.br

# List all the connections to end-nodes:
.br

opaextractsellinks -F "nodetype:FI"
.br


.br

# List all the links on the 2nd HFI\[aq]s fabric of a multi-plane fabric:
.br

opaextractsellinks -h 2