'\" t .\" Title: bcmxcp_usb .\" Author: [see the "AUTHOR" section] .\" Generator: DocBook XSL Stylesheets v1.78.1 .\" Date: 12/29/2015 .\" Manual: NUT Manual .\" Source: Network UPS Tools 2.7.3.1 .\" Language: English .\" .TH "BCMXCP_USB" "8" "12/29/2015" "Network UPS Tools 2\&.7\&.3\&." "NUT Manual" .\" ----------------------------------------------------------------- .\" * Define some portability stuff .\" ----------------------------------------------------------------- .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .\" http://bugs.debian.org/507673 .\" http://lists.gnu.org/archive/html/groff/2009-02/msg00013.html .\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ .ie \n(.g .ds Aq \(aq .el .ds Aq ' .\" ----------------------------------------------------------------- .\" * set default formatting .\" ----------------------------------------------------------------- .\" disable hyphenation .nh .\" disable justification (adjust text to left margin only) .ad l .\" ----------------------------------------------------------------- .\" * MAIN CONTENT STARTS HERE * .\" ----------------------------------------------------------------- .SH "NAME" bcmxcp_usb \- Experimental driver for UPSes supporting the BCM/XCP protocol over USB .SH "NOTE" .sp This man page only documents the hardware\-specific features of the bcmxcp_usb driver\&. For information about the core driver, see \fBnutupsdrv\fR(8)\&. This driver is a variant of the serial driver bcmxcp and uses the same core code\&. .SH "SUPPORTED HARDWARE" .sp This driver should recognize all BCM/XCP\-compatible UPSes that are connected via USB\&. It has been developed and tested on Powerware PW3501 hardware\&. It also has been tested on PW5110 hardware\&. .SH "EXTRA ARGUMENTS" .sp This driver supports the following optional settings in the \fBups.conf\fR(5)\&. .PP \fBshutdown_delay=\fR\fIdelay\fR .RS 4 The number of seconds that the UPS should wait between receiving the shutdown command and actually shutting off\&. .RE .SH "DEFAULT VALUES FOR THE EXTRA ARGUMENTS" .sp \fBshutdown_delay =\fR\fI120\fR .SH "INSTANT COMMANDS" .sp This driver supports the following Instant Commands: .PP \fBshutdown\&.return\fR .RS 4 Turn off the load and return when power is back\&. .RE .PP \fBshutdown\&.stayoff\fR .RS 4 Turn off the load and remain off\&. .RE .PP \fBtest\&.battery\&.start\fR .RS 4 Start a battery test\&. .RE .SH "TODO LIST" .PP \fBReport UPS alarm status\fR .RS 4 BCM/XCP supports reporting a wide range of UPS alarm conditions\&. .RE .PP \fBReport UPS statistics informations\fR .RS 4 BCM/XCP supports reporting of UPS statistics data\&. .RE .SH "EXPERIMENTAL DRIVER" .sp This driver has been tagged experimental, even if it has been reported to be stable\&. Thus it is not suitable for production systems and it is not built by default\&. This is mainly due to the fact that it is a new driver\&. .SH "INSTALLATION" .sp This driver is not built by default\&. You can build it by using "configure \-\-with\-usb=yes"\&. Note that it will also install other USB drivers\&. .sp You also need to install manually the hotplug files (libhidups and libhid\&.usermap), generally in etc/hotplug/usb/, to address the permission settings problem\&. Lastly note that the libhidups file must have execution flag set (ie using chmod +x \&...)\&. .SH "IMPLEMENTATION" .sp bcmxcp_usb only supports 1 UPS at this time\&. You can put the "auto" value for port in ups\&.conf, i\&.e\&.: .sp .if n \{\ .RS 4 .\} .nf [pw3105] driver = bcmxcp_usb port = auto .fi .if n \{\ .RE .\} .SH "KNOWN ISSUES AND BUGS" .SS ""Got EPERM: Operation not permitted upon driver startup"" .sp You have forgotten to install the hotplug files, as explained in the INSTALLATION section above\&. Don\(cqt forget to restart hotplug so that it applies these changes\&. .SH "AUTHOR" .sp Tore Ørpetveit , Wolfgang Ocker .SH "SEE ALSO" .SS "The core driver:" .sp \fBnutupsdrv\fR(8) .SS "Internet resources:" .sp The NUT (Network UPS Tools) home page: http://www\&.networkupstools\&.org/