.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.41.1.
.TH MSTFWTRACE, "1" "March 2020" "mstfwtrace, mstflint 4.14.0, built on Mar 03 2020, 14:01:10. Git SHA Hash: N/A" "User Commands"
.SH NAME
mstfwtrace \- Extracts and prints trace messages generated by the firmware of 5th generation devices
.SH DESCRIPTION
usage: mstfwtrace \fB\-d\fR|\-\-device DEVICE [options]
.SS "optional arguments:"
.TP
\fB\-h\fR, \fB\-\-help\fR
show this help message and exit
.TP
\fB\-v\fR, \fB\-\-version\fR, \fB\-v\fR
Print tool version.
.SH OPTIONS
.TP
\fB\-d\fR DEVICE, \fB\-\-device\fR DEVICE
PCI device name
.TP
\fB\-\-tracer_mode\fR TRACER_MODE
Tracer mode [MEM]
.TP
\fB\-\-real_ts\fR
Print real timestamps in [hh:mm:ss:nsec]
.TP
\fB\-\-ignore_old_events\fR
Ignore collecting old events
.SS "Format:"
.TP
\fB\-i\fR IRISC, \fB\-\-irisc\fR IRISC
Irisc name [all]
.TP
\fB\-s\fR, \fB\-\-stream\fR
Run in streaming mode
.TP
\fB\-m\fR MASK, \fB\-\-mask\fR MASK
Trace class mask, use "+" to enable multiple classes
or use integer format, e.g: \fB\-m\fR class1+class2+... or
0xff00ff00
.TP
\fB\-l\fR LEVEL, \fB\-\-level\fR LEVEL
Trace level
.PP
Device Specific Info:
====================
.IP
ConnectIB:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
SwitchIB:
Trace classes:
.IP
class1, class2
.IP
ConnectX4:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
ConnectX5:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
BlueField:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
ConnectX6:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
ConnectX6DX:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
Spectrum:
Trace classes:
.IP
class1, class2
.IP
ConnectX4LX:
Trace classes:
.IP
DEBUG_INIT, INIT, ICM, ICM_FREE_LIST, HOST_MNG
CMD_IF, PHY_IB, PHY_RX_ADAP, PHY_EYE_OPN, PHY_COMMON
PHY_MANAGER, PWR, FLR, ICM_ACCESS, MAD
RXT_CHECKS, I2C, TRANSPORT, FW_LL, RX_ERRORS
CMD_DRIVER, PROFILING, MANAGEMENT, FLASH, STEERING
IFARM, ICMD, PCI, DC_CLEANUP, PHY_ETH
VIRT
.IP
SwitchIB2:
Trace classes:
.IP
class1, class2
.IP
Quantum:
Trace classes:
.IP
class1, class2
.IP
Spectrum2:
Trace classes:
.IP
class1, class2
.SH "SEE ALSO"
The full documentation for
.B mstfwtrace,
is maintained as a Texinfo manual.  If the
.B info
and
.B mstfwtrace,
programs are properly installed at your site, the command
.IP
.B info mstfwtrace,
.PP
should give you access to the complete manual.