.\" Copyright (C) 2010 Intel Corporation, Author: Andi Kleen .\" and Copyright 2014, Vivek Goyal .\" and Copyright (c) 2015, Michael Kerrisk .\" .\" %%%LICENSE_START(VERBATIM) .\" Permission is granted to make and distribute verbatim copies of this .\" manual provided the copyright notice and this permission notice are .\" preserved on all copies. .\" .\" Permission is granted to copy and distribute modified versions of this .\" manual under the conditions for verbatim copying, provided that the .\" entire resulting derived work is distributed under the terms of a .\" permission notice identical to this one. .\" .\" Since the Linux kernel and libraries are constantly changing, this .\" manual page may be incorrect or out-of-date. The author(s) assume no .\" responsibility for errors or omissions, or for damages resulting from .\" the use of the information contained herein. The author(s) may not .\" have taken the same level of care in the production of this manual, .\" which is licensed free of charge, as they might when working .\" professionally. .\" .\" Formatted or processed versions of this manual, if unaccompanied by .\" the source, must acknowledge the copyright and authors of this work. .\" %%%LICENSE_END .\" .TH KEXEC_LOAD 2 2019-03-06 "Linux" "Linux Programmer's Manual" .SH NAME kexec_load, kexec_file_load \- load a new kernel for later execution .SH SYNOPSIS .nf .B #include .PP .BI "long kexec_load(unsigned long " entry ", unsigned long " nr_segments "," .BI " struct kexec_segment *" segments \ ", unsigned long " flags ");" .PP .BI "long kexec_file_load(int " kernel_fd ", int " initrd_fd "," .BI " unsigned long " cmdline_len \ ", const char *" cmdline "," .BI " unsigned long " flags ");" .fi .PP .IR Note : There are no glibc wrappers for these system calls; see NOTES. .SH DESCRIPTION The .BR kexec_load () system call loads a new kernel that can be executed later by .BR reboot (2). .PP The .I flags argument is a bit mask that controls the operation of the call. The following values can be specified in .IR flags : .TP .BR KEXEC_ON_CRASH " (since Linux 2.6.13)" Execute the new kernel automatically on a system crash. This "crash kernel" is loaded into an area of reserved memory that is determined at boot time using the .I crashkernel kernel command-line parameter. The location of this reserved memory is exported to user space via the .I /proc/iomem file, in an entry labeled "Crash kernel". A user-space application can parse this file and prepare a list of segments (see below) that specify this reserved memory as destination. If this flag is specified, the kernel checks that the target segments specified in .I segments fall within the reserved region. .TP .BR KEXEC_PRESERVE_CONTEXT " (since Linux 2.6.27)" Preserve the system hardware and software states before executing the new kernel. This could be used for system suspend. This flag is available only if the kernel was configured with .BR CONFIG_KEXEC_JUMP , and is effective only if .I nr_segments is greater than 0. .PP The high-order bits (corresponding to the mask 0xffff0000) of .I flags contain the architecture of the to-be-executed kernel. Specify (OR) the constant .B KEXEC_ARCH_DEFAULT to use the current architecture, or one of the following architecture constants .BR KEXEC_ARCH_386 , .BR KEXEC_ARCH_68K , .BR KEXEC_ARCH_X86_64 , .BR KEXEC_ARCH_PPC , .BR KEXEC_ARCH_PPC64 , .BR KEXEC_ARCH_IA_64 , .BR KEXEC_ARCH_ARM , .BR KEXEC_ARCH_S390 , .BR KEXEC_ARCH_SH , .BR KEXEC_ARCH_MIPS , and .BR KEXEC_ARCH_MIPS_LE . The architecture must be executable on the CPU of the system. .PP The .I entry argument is the physical entry address in the kernel image. The .I nr_segments argument is the number of segments pointed to by the .I segments pointer; the kernel imposes an (arbitrary) limit of 16 on the number of segments. The .I segments argument is an array of .I kexec_segment structures which define the kernel layout: .PP .in +4n .EX struct kexec_segment { void *buf; /* Buffer in user space */ size_t bufsz; /* Buffer length in user space */ void *mem; /* Physical address of kernel */ size_t memsz; /* Physical address length */ }; .EE .in .PP The kernel image defined by .I segments is copied from the calling process into the kernel either in regular memory or in reserved memory (if .BR KEXEC_ON_CRASH is set). The kernel first performs various sanity checks on the information passed in .IR segments . If these checks pass, the kernel copies the segment data to kernel memory. Each segment specified in .I segments is copied as follows: .IP * 3 .I buf and .I bufsz identify a memory region in the caller's virtual address space that is the source of the copy. The value in .I bufsz may not exceed the value in the .I memsz field. .IP * .I mem and .I memsz specify a physical address range that is the target of the copy. The values specified in both fields must be multiples of the system page size. .IP * .I bufsz bytes are copied from the source buffer to the target kernel buffer. If .I bufsz is less than .IR memsz , then the excess bytes in the kernel buffer are zeroed out. .PP In case of a normal kexec (i.e., the .BR KEXEC_ON_CRASH flag is not set), the segment data is loaded in any available memory and is moved to the final destination at kexec reboot time (e.g., when the .BR kexec (8) command is executed with the .I \-e option). .PP In case of kexec on panic (i.e., the .BR KEXEC_ON_CRASH flag is set), the segment data is loaded to reserved memory at the time of the call, and, after a crash, the kexec mechanism simply passes control to that kernel. .PP The .BR kexec_load () system call is available only if the kernel was configured with .BR CONFIG_KEXEC . .SS kexec_file_load() The .BR kexec_file_load () system call is similar to .BR kexec_load (), but it takes a different set of arguments. It reads the kernel to be loaded from the file referred to by the file descriptor .IR kernel_fd , and the initrd (initial RAM disk) to be loaded from file referred to by the file descriptor .IR initrd_fd . The .IR cmdline argument is a pointer to a buffer containing the command line for the new kernel. The .IR cmdline_len argument specifies size of the buffer. The last byte in the buffer must be a null byte (\(aq\e0\(aq). .PP The .IR flags argument is a bit mask which modifies the behavior of the call. The following values can be specified in .IR flags : .TP .BR KEXEC_FILE_UNLOAD Unload the currently loaded kernel. .TP .BR KEXEC_FILE_ON_CRASH Load the new kernel in the memory region reserved for the crash kernel (as for .BR KEXEC_ON_CRASH ). This kernel is booted if the currently running kernel crashes. .TP .BR KEXEC_FILE_NO_INITRAMFS Loading initrd/initramfs is optional. Specify this flag if no initramfs is being loaded. If this flag is set, the value passed in .IR initrd_fd is ignored. .PP The .BR kexec_file_load () .\" See also http://lwn.net/Articles/603116/ system call was added to provide support for systems where "kexec" loading should be restricted to only kernels that are signed. This system call is available only if the kernel was configured with .BR CONFIG_KEXEC_FILE . .SH RETURN VALUE On success, these system calls returns 0. On error, \-1 is returned and .I errno is set to indicate the error. .SH ERRORS .TP .B EADDRNOTAVAIL .\" See kernel/kexec.::sanity_check_segment_list in the 3.19 kernel source The .B KEXEC_ON_CRASH flags was specified, but the region specified by the .I mem and .I memsz fields of one of the .I segments entries lies outside the range of memory reserved for the crash kernel. .TP .B EADDRNOTAVAIL The value in a .I mem or .I memsz field in one of the .I segments entries is not a multiple of the system page size. .TP .B EBADF .I kernel_fd or .I initrd_fd is not a valid file descriptor. .TP .B EBUSY Another crash kernel is already being loaded or a crash kernel is already in use. .TP .B EINVAL .I flags is invalid. .TP .B EINVAL The value of a .I bufsz field in one of the .I segments entries exceeds the value in the corresponding .I memsz field. .TP .B EINVAL .IR nr_segments exceeds .BR KEXEC_SEGMENT_MAX (16). .TP .B EINVAL Two or more of the kernel target buffers overlap. .TP .B EINVAL The value in .I cmdline[cmdline_len-1] is not \(aq\e0\(aq. .TP .B EINVAL The file referred to by .I kernel_fd or .I initrd_fd is empty (length zero). .TP .B ENOEXEC .I kernel_fd does not refer to an open file, or the kernel can't load this file. Currently, the file must be a bzImage and contain an x86 kernel that is loadable above 4\ GiB in memory (see the kernel source file .IR Documentation/x86/boot.txt ). .TP .B ENOMEM Could not allocate memory. .TP .B EPERM The caller does not have the .BR CAP_SYS_BOOT capability. .SH VERSIONS The .BR kexec_load () system call first appeared in Linux 2.6.13. The .BR kexec_file_load () system call first appeared in Linux 3.17. .SH CONFORMING TO These system calls are Linux-specific. .SH NOTES Currently, there is no glibc support for these system calls. Call them using .BR syscall (2). .SH SEE ALSO .BR reboot (2), .BR syscall (2), .BR kexec (8) .PP The kernel source files .IR Documentation/kdump/kdump.txt and .IR Documentation/admin-guide/kernel-parameters.txt .SH COLOPHON This page is part of release 5.10 of the Linux .I man-pages project. A description of the project, information about reporting bugs, and the latest version of this page, can be found at \%https://www.kernel.org/doc/man\-pages/.