- bullseye 1:2.30.2-1
- bullseye-backports 1:2.39.2-1~bpo11+1
- testing 1:2.39.2-1.1
- unstable 1:2.40.1-1
- experimental 1:2.40.1+next.20230427-1
GIT-PUSH(1) | Git Manual | GIT-PUSH(1) |
NAME¶
git-push - Update remote refs along with associated objects
SYNOPSIS¶
git push [--all | --mirror | --tags] [--follow-tags] [--atomic] [-n | --dry-run] [--receive-pack=<git-receive-pack>]
[--repo=<repository>] [-f | --force] [-d | --delete] [--prune] [-v | --verbose]
[-u | --set-upstream] [-o <string> | --push-option=<string>]
[--[no-]signed|--signed=(true|false|if-asked)]
[--force-with-lease[=<refname>[:<expect>]] [--force-if-includes]]
[--no-verify] [<repository> [<refspec>...]]
DESCRIPTION¶
Updates remote refs using local refs, while sending objects necessary to complete the given refs.
You can make interesting things happen to a repository every time you push into it, by setting up hooks there. See documentation for git-receive-pack(1).
When the command line does not specify where to push with the <repository> argument, branch.*.remote configuration for the current branch is consulted to determine where to push. If the configuration is missing, it defaults to origin.
When the command line does not specify what to push with <refspec>... arguments or --all, --mirror, --tags options, the command finds the default <refspec> by consulting remote.*.push configuration, and if it is not found, honors push.default configuration to decide what to push (See git-config(1) for the meaning of push.default).
When neither the command-line nor the configuration specify what to push, the default behavior is used, which corresponds to the simple value for push.default: the current branch is pushed to the corresponding upstream branch, but as a safety measure, the push is aborted if the upstream branch does not have the same name as the local one.
OPTIONS¶
<repository>
<refspec>...
The <src> is often the name of the branch you would want to push, but it can be any arbitrary "SHA-1 expression", such as master~4 or HEAD (see gitrevisions(7)).
The <dst> tells which ref on the remote side is updated with this push. Arbitrary expressions cannot be used here, an actual ref must be named. If git push [<repository>] without any <refspec> argument is set to update some ref at the destination with <src> with remote.<repository>.push configuration variable, :<dst> part can be omitted—such a push will update a ref that <src> normally updates without any <refspec> on the command line. Otherwise, missing :<dst> means to update the same ref as the <src>.
If <dst> doesn’t start with refs/ (e.g. refs/heads/master) we will try to infer where in refs/* on the destination <repository> it belongs based on the type of <src> being pushed and whether <dst> is ambiguous.
The object referenced by <src> is used to update the <dst> reference on the remote side. Whether this is allowed depends on where in refs/* the <dst> reference lives as described in detail below, in those sections "update" means any modifications except deletes, which as noted after the next few sections are treated differently.
The refs/heads/* namespace will only accept commit objects, and updates only if they can be fast-forwarded.
The refs/tags/* namespace will accept any kind of object (as commits, trees and blobs can be tagged), and any updates to them will be rejected.
It’s possible to push any type of object to any namespace outside of refs/{tags,heads}/*. In the case of tags and commits, these will be treated as if they were the commits inside refs/heads/* for the purposes of whether the update is allowed.
I.e. a fast-forward of commits and tags outside refs/{tags,heads}/* is allowed, even in cases where what’s being fast-forwarded is not a commit, but a tag object which happens to point to a new commit which is a fast-forward of the commit the last tag (or commit) it’s replacing. Replacing a tag with an entirely different tag is also allowed, if it points to the same commit, as well as pushing a peeled tag, i.e. pushing the commit that existing tag object points to, or a new tag object which an existing commit points to.
Tree and blob objects outside of refs/{tags,heads}/* will be treated the same way as if they were inside refs/tags/*, any update of them will be rejected.
All of the rules described above about what’s not allowed as an update can be overridden by adding an the optional leading + to a refspec (or using --force command line option). The only exception to this is that no amount of forcing will make the refs/heads/* namespace accept a non-commit object. Hooks and configuration can also override or amend these rules, see e.g. receive.denyNonFastForwards in git-config(1) and pre-receive and update in githooks(5).
Pushing an empty <src> allows you to delete the <dst> ref from the remote repository. Deletions are always accepted without a leading + in the refspec (or --force), except when forbidden by configuration or hooks. See receive.denyDeletes in git-config(1) and pre-receive and update in githooks(5).
The special refspec : (or +: to allow non-fast-forward updates) directs Git to push "matching" branches: for every branch that exists on the local side, the remote side is updated if a branch of the same name already exists on the remote side.
tag <tag> means the same as refs/tags/<tag>:refs/tags/<tag>.
--all
--prune
--mirror
-n, --dry-run
--porcelain
-d, --delete
--tags
--follow-tags
--[no-]signed, --signed=(true|false|if-asked)
--[no-]atomic
-o <option>, --push-option=<option>
--receive-pack=<git-receive-pack>, --exec=<git-receive-pack>
--[no-]force-with-lease, --force-with-lease=<refname>, --force-with-lease=<refname>:<expect>
This option overrides this restriction if the current value of the remote ref is the expected value. "git push" fails otherwise.
Imagine that you have to rebase what you have already published. You will have to bypass the "must fast-forward" rule in order to replace the history you originally published with the rebased history. If somebody else built on top of your original history while you are rebasing, the tip of the branch at the remote may advance with her commit, and blindly pushing with --force will lose her work.
This option allows you to say that you expect the history you are updating is what you rebased and want to replace. If the remote ref still points at the commit you specified, you can be sure that no other people did anything to the ref. It is like taking a "lease" on the ref without explicitly locking it, and the remote ref is updated only if the "lease" is still valid.
--force-with-lease alone, without specifying the details, will protect all remote refs that are going to be updated by requiring their current value to be the same as the remote-tracking branch we have for them.
--force-with-lease=<refname>, without specifying the expected value, will protect the named ref (alone), if it is going to be updated, by requiring its current value to be the same as the remote-tracking branch we have for it.
--force-with-lease=<refname>:<expect> will protect the named ref (alone), if it is going to be updated, by requiring its current value to be the same as the specified value <expect> (which is allowed to be different from the remote-tracking branch we have for the refname, or we do not even have to have such a remote-tracking branch when this form is used). If <expect> is the empty string, then the named ref must not already exist.
Note that all forms other than --force-with-lease=<refname>:<expect> that specifies the expected current value of the ref explicitly are still experimental and their semantics may change as we gain experience with this feature.
"--no-force-with-lease" will cancel all the previous --force-with-lease on the command line.
A general note on safety: supplying this option without an expected value, i.e. as --force-with-lease or --force-with-lease=<refname> interacts very badly with anything that implicitly runs git fetch on the remote to be pushed to in the background, e.g. git fetch origin on your repository in a cronjob.
The protection it offers over --force is ensuring that subsequent changes your work wasn’t based on aren’t clobbered, but this is trivially defeated if some background process is updating refs in the background. We don’t have anything except the remote tracking info to go by as a heuristic for refs you’re expected to have seen & are willing to clobber.
If your editor or some other system is running git fetch in the background for you a way to mitigate this is to simply set up another remote:
git remote add origin-push $(git config remote.origin.url) git fetch origin-push
Now when the background process runs git fetch origin the references on origin-push won’t be updated, and thus commands like:
git push --force-with-lease origin-push
Will fail unless you manually run git fetch origin-push. This method is of course entirely defeated by something that runs git fetch --all, in that case you’d need to either disable it or do something more tedious like:
git fetch # update 'master' from remote git tag base master # mark our base point git rebase -i master # rewrite some commits git push --force-with-lease=master:base master:master
I.e. create a base tag for versions of the upstream code that you’ve seen and are willing to overwrite, then rewrite history, and finally force push changes to master if the remote version is still at base, regardless of what your local remotes/origin/master has been updated to in the background.
Alternatively, specifying --force-if-includes as an ancillary option along with --force-with-lease[=<refname>] (i.e., without saying what exact commit the ref on the remote side must be pointing at, or which refs on the remote side are being protected) at the time of "push" will verify if updates from the remote-tracking refs that may have been implicitly updated in the background are integrated locally before allowing a forced update.
-f, --force
This flag disables these checks, and can cause the remote repository to lose commits; use it with care.
Note that --force applies to all the refs that are pushed, hence using it with push.default set to matching or with multiple push destinations configured with remote.*.push may overwrite refs other than the current branch (including local refs that are strictly behind their remote counterpart). To force a push to only one branch, use a + in front of the refspec to push (e.g git push origin +master to force a push to the master branch). See the <refspec>... section above for details.
--[no-]force-if-includes
This option enables a check that verifies if the tip of the remote-tracking ref is reachable from one of the "reflog" entries of the local branch based in it for a rewrite. The check ensures that any updates from the remote have been incorporated locally by rejecting the forced update if that is not the case.
If the option is passed without specifying --force-with-lease, or specified along with --force-with-lease=<refname>:<expect>, it is a "no-op".
Specifying --no-force-if-includes disables this behavior.
--repo=<repository>
-u, --set-upstream
--[no-]thin
-q, --quiet
-v, --verbose
--progress
--no-recurse-submodules, --recurse-submodules=check|on-demand|only|no
--[no-]verify
-4, --ipv4
-6, --ipv6
GIT URLS¶
In general, URLs contain information about the transport protocol, the address of the remote server, and the path to the repository. Depending on the transport protocol, some of this information may be absent.
Git supports ssh, git, http, and https protocols (in addition, ftp, and ftps can be used for fetching, but this is inefficient and deprecated; do not use it).
The native transport (i.e. git:// URL) does no authentication and should be used with caution on unsecured networks.
The following syntaxes may be used with them:
An alternative scp-like syntax may also be used with the ssh protocol:
This syntax is only recognized if there are no slashes before the first colon. This helps differentiate a local path that contains a colon. For example the local path foo:bar could be specified as an absolute path or ./foo:bar to avoid being misinterpreted as an ssh url.
The ssh and git protocols additionally support ~username expansion:
For local repositories, also supported by Git natively, the following syntaxes may be used:
These two syntaxes are mostly equivalent, except when cloning, when the former implies --local option. See git-clone(1) for details.
git clone, git fetch and git pull, but not git push, will also accept a suitable bundle file. See git-bundle(1).
When Git doesn’t know how to handle a certain transport protocol, it attempts to use the remote-<transport> remote helper, if one exists. To explicitly request a remote helper, the following syntax may be used:
where <address> may be a path, a server and path, or an arbitrary URL-like string recognized by the specific remote helper being invoked. See gitremote-helpers(7) for details.
If there are a large number of similarly-named remote repositories and you want to use a different format for them (such that the URLs you use will be rewritten into URLs that work), you can create a configuration section of the form:
[url "<actual url base>"]
insteadOf = <other url base>
For example, with this:
[url "git://git.host.xz/"]
insteadOf = host.xz:/path/to/
insteadOf = work:
a URL like "work:repo.git" or like "host.xz:/path/to/repo.git" will be rewritten in any context that takes a URL to be "git://git.host.xz/repo.git".
If you want to rewrite URLs for push only, you can create a configuration section of the form:
[url "<actual url base>"]
pushInsteadOf = <other url base>
For example, with this:
[url "ssh://example.org/"]
pushInsteadOf = git://example.org/
a URL like "git://example.org/path/to/repo.git" will be rewritten to "ssh://example.org/path/to/repo.git" for pushes, but pulls will still use the original URL.
REMOTES¶
The name of one of the following can be used instead of a URL as <repository> argument:
All of these also allow you to omit the refspec from the command line because they each contain a refspec which git will use by default.
Named remote in configuration file¶
You can choose to provide the name of a remote which you had previously configured using git-remote(1), git-config(1) or even by a manual edit to the $GIT_DIR/config file. The URL of this remote will be used to access the repository. The refspec of this remote will be used by default when you do not provide a refspec on the command line. The entry in the config file would appear like this:
[remote "<name>"]
url = <url>
pushurl = <pushurl>
push = <refspec>
fetch = <refspec>
The <pushurl> is used for pushes only. It is optional and defaults to <url>.
Named file in $GIT_DIR/remotes¶
You can choose to provide the name of a file in $GIT_DIR/remotes. The URL in this file will be used to access the repository. The refspec in this file will be used as default when you do not provide a refspec on the command line. This file should have the following format:
URL: one of the above URL format
Push: <refspec>
Pull: <refspec>
Push: lines are used by git push and Pull: lines are used by git pull and git fetch. Multiple Push: and Pull: lines may be specified for additional branch mappings.
Named file in $GIT_DIR/branches¶
You can choose to provide the name of a file in $GIT_DIR/branches. The URL in this file will be used to access the repository. This file should have the following format:
<url>#<head>
<url> is required; #<head> is optional.
Depending on the operation, git will use one of the following refspecs, if you don’t provide one on the command line. <branch> is the name of this file in $GIT_DIR/branches and <head> defaults to master.
git fetch uses:
refs/heads/<head>:refs/heads/<branch>
git push uses:
HEAD:refs/heads/<head>
OUTPUT¶
The output of "git push" depends on the transport method used; this section describes the output when pushing over the Git protocol (either locally or via ssh).
The status of the push is output in tabular form, with each line representing the status of a single ref. Each line is of the form:
<flag> <summary> <from> -> <to> (<reason>)
If --porcelain is used, then each line of the output is of the form:
<flag> \t <from>:<to> \t <summary> (<reason>)
The status of up-to-date refs is shown only if --porcelain or --verbose option is used.
flag
(space)
+
-
*
!
=
summary
For a failed update, more details are given:
rejected
remote rejected
remote failure
from
to
reason
NOTE ABOUT FAST-FORWARDS¶
When an update changes a branch (or more in general, a ref) that used to point at commit A to point at another commit B, it is called a fast-forward update if and only if B is a descendant of A.
In a fast-forward update from A to B, the set of commits that the original commit A built on top of is a subset of the commits the new commit B builds on top of. Hence, it does not lose any history.
In contrast, a non-fast-forward update will lose history. For example, suppose you and somebody else started at the same commit X, and you built a history leading to commit B while the other person built a history leading to commit A. The history looks like this:
B
/
---X---A
Further suppose that the other person already pushed changes leading to A back to the original repository from which you two obtained the original commit X.
The push done by the other person updated the branch that used to point at commit X to point at commit A. It is a fast-forward.
But if you try to push, you will attempt to update the branch (that now points at A) with commit B. This does not fast-forward. If you did so, the changes introduced by commit A will be lost, because everybody will now start building on top of B.
The command by default does not allow an update that is not a fast-forward to prevent such loss of history.
If you do not want to lose your work (history from X to B) or the work by the other person (history from X to A), you would need to first fetch the history from the repository, create a history that contains changes done by both parties, and push the result back.
You can perform "git pull", resolve potential conflicts, and "git push" the result. A "git pull" will create a merge commit C between commits A and B.
B---C
/ /
---X---A
Updating A with the resulting merge commit will fast-forward and your push will be accepted.
Alternatively, you can rebase your change between X and B on top of A, with "git pull --rebase", and push the result back. The rebase will create a new commit D that builds the change between X and B on top of A.
B D
/ /
---X---A
Again, updating A with this commit will fast-forward and your push will be accepted.
There is another common situation where you may encounter non-fast-forward rejection when you try to push, and it is possible even when you are pushing into a repository nobody else pushes into. After you push commit A yourself (in the first picture in this section), replace it with "git commit --amend" to produce commit B, and you try to push it out, because forgot that you have pushed A out already. In such a case, and only if you are certain that nobody in the meantime fetched your earlier commit A (and started building on top of it), you can run "git push --force" to overwrite it. In other words, "git push --force" is a method reserved for a case where you do mean to lose history.
EXAMPLES¶
git push
git push origin
The default behavior of this command when no <refspec> is given can be configured by setting the push option of the remote, or the push.default configuration variable.
For example, to default to pushing only the current branch to origin use git config remote.origin.push HEAD. Any valid <refspec> (like the ones in the examples below) can be configured as the default for git push origin.
git push origin :
git push origin master
git push origin HEAD
git push mothership master:satellite/master dev:satellite/dev
See the section describing <refspec>... above for a discussion of the matching semantics.
This is to emulate git fetch run on the mothership using git push that is run in the opposite direction in order to integrate the work done on satellite, and is often necessary when you can only make connection in one way (i.e. satellite can ssh into mothership but mothership cannot initiate connection to satellite because the latter is behind a firewall or does not run sshd).
After running this git push on the satellite machine, you would ssh into the mothership and run git merge there to complete the emulation of git pull that were run on mothership to pull changes made on satellite.
git push origin HEAD:master
git push origin master:refs/heads/experimental
git push origin :experimental
git push origin +dev:master
o---o---o---A---B origin/master
\
X---Y---Z dev
The above command would change the origin repository to
A---B (unnamed branch)
/
o---o---o---X---Y---Z master
Commits A and B would no longer belong to a branch with a symbolic name, and so would be unreachable. As such, these commits would be removed by a git gc command on the origin repository.
SECURITY¶
The fetch and push protocols are not designed to prevent one side from stealing data from the other repository that was not intended to be shared. If you have private data that you need to protect from a malicious peer, your best option is to store it in another repository. This applies to both clients and servers. In particular, namespaces on a server are not effective for read access control; you should only grant read access to a namespace to clients that you would trust with read access to the entire repository.
The known attack vectors are as follows:
GIT¶
Part of the git(1) suite
03/10/2021 | Git 2.30.2 |