.TH scan 1 "February 14, 2010" .SH NAME scan \- a program to produce channel.conf files. .SH SYNOPSIS .B scan .RI [ options ] .br .SH DESCRIPTION This manual page documents briefly the .B scan commands. .PP \fBscan\fP is a program to produce channels.conf files. .SH OPTIONS .TP .B \-c [initial-tuning-data-file] scan on currently tuned transponder only .TP .B \-v verbose (repeat for more) .TP .B \-q quiet (repeat for less) .TP .B \-a N use DVB /dev/dvb/adapterN/ .TP .B \-f N use DVB /dev/dvb/adapter?/frontendN .TP .B \-d N use DVB /dev/dvb/adapter?/demuxN .TP .B \-s N use DiSEqC switch position N (DVB-S only) .TP .B \-i N spectral inversion setting (0: off, 1: on, 2: auto [default]) .TP .B \-n evaluate NIT-other for full network scan (slow!) .TP .B \-5 multiply all filter timeouts by factor 5 for non-DVB-compliant section repitition rates .TP .B \-o fmt output format: 'zap' (default), 'vdr' or 'pids' (default with -c) .TP .B \-x N Conditional Access, (default -1) N=0 gets only FTA channels N=-1 gets all channels N=xxx sets ca field in vdr output to :xxx: .TP .B \-t N Service select, Combined bitfield parameter. 1 = TV, 2 = Radio, 4 = Other, (default 7) .TP .B \-p for vdr output format: dump provider name .TP .B \-e N VDR version, default 3 for VDR-1.3.x and newer value 2 sets NIT and TID to zero Vdr version 1.3.x and up implies -p. .TP .B \-l lnb-type (DVB-S Only) (use -l help to print types) or .TP .B \-l low[,high[,switch]] in Mhz .TP .B \-u UK DVB-T Freeview channel numbering for VDR .TP .B \-P do not use ATSC PSIP tables for scanning (but only PAT and PMT) (applies for ATSC only) .TP .B \-A N check for ATSC 1=Terrestrial [default], 2=Cable or 3=both .TP .B \-U Uniquely name unknown services .br .PP This manual page was written by Uwe Bugla .