.TH gnutv 1 "February 14, 2010"
.SH NAME
gnutv \- a digital tv utility.
.SH SYNOPSIS
.B gnutv
.RI [ options ] <channel name>
.br
.SH DESCRIPTION
This manual page documents briefly the
.B gnutv
commands.
.PP
\fBgnutv\fP is a digital tv utility.
.SH OPTIONS
.TP
.B \-adapter <id>
adapter to use (default 0)
.TP
.B \-frontend <id>
frontend to use (default 0)
.TP
.B \-demux <id>
demux to use (default 0)
.TP
.B \-caslotnum <id>
ca slot number to use (default 0)
.TP
.B \-channels <filename>
channels.conf file
.TP
.B \-secfile <filename>
Optional sec.conf file
.TP
.B \-secid <secid>
ID of the SEC configuration to use, one of:
	* UNIVERSAL (default) - Europe, 10800 to 11800 MHz and 11600 to 12700 Mhz,\
	  Dual LO, loband 9750, hiband 10600 MHz
	* DBS - Expressvu, North America, 12200 to 12700 MHz, Single LO, 11250 MHz
	* STANDARD - 10945 to 11450 Mhz, Single LO, 10000 Mhz
	* ENHANCED - Astra, 10700 to 11700 MHz, Single LO, 9750 MHz
	* C-BAND - Big Dish, 3700 to 4200 MHz, Single LO, 5150 Mhz
	* C-MULTI - Big Dish - Multipoint LNBf, 3700 to 4200 MHz, Dual LO, H:5150MHz, V:5750MHz
	* One of the sec definitions from the secfile if supplied
.TP
.B \-out decoder
Output to hardware decoder (default)
.TP
.B -out decoderabypass
Output to hardware decoder using audio bypass
.B -out dvr
Output stream to dvr device
.B -out null
Do not output anything
.B -out stdout
Output to stdout
.B -out file <filename>
Output stream to file
.B -out udp <address> <port>
Output stream to address:port using udp
.B -out udpif <address> <port> <interface>
Output stream to address:port using udp forcing the specified interface
.B -out rtp <address> <port>
Output stream to address:port using udp-rtp
.B -out rtpif <address> <port> <interface>
Output stream to address:port using udp-rtp forcing the specified interface
.TP
.B \-timeout <secs>
Number of seconds to output channel for (0=>exit immediately after successful tuning, default is to output forever)
.TP
.B \-cammenu
Show the CAM menu
.TP
.B \-nomoveca
Do not attempt to move CA descriptors from stream to programme level
.B \-h
print this help text
.br
.PP
This manual page was written by Uwe Bugla <uwe.bugla@gmx.de>.