.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.44.1.
.TH MEASURE "1" "September 2014" "spotread" "User Commands"
.SH NAME
Measure \- Read Print Spot values.
.SH DESCRIPTION
Measure spot values, Version 1.6.3
.SH SYNOPSIS
.B spotread
.RB [\-options]\ [logfile]
.TP
\fB\-v\fR
Verbose mode
.TP
\fB\-s\fR
Print spectrum for each reading
.TP
\fB\-S\fR
Plot spectrum for each reading
.TP
\fB\-c\fR listno
Set communication port from the following list (default 1)
.IP
** No ports found **
.TP
\fB\-t\fR
Use transmission measurement mode
.TP
\fB\-e\fR
Use emissive measurement mode (absolute results)
.TP
\fB\-eb\fR
Use display white brightness relative measurement mode
.TP
\fB\-ew\fR
Use display white point relative chromatically adjusted mode
.TP
\fB\-p\fR
Use telephoto measurement mode (absolute results)
.TP
\fB\-pb\fR
Use projector white brightness relative measurement mode
.TP
\fB\-pw\fR
Use projector white point relative chromatically adjusted mode
.TP
\fB\-a\fR
Use ambient measurement mode (absolute results)
.TP
\fB\-f\fR
Use ambient flash measurement mode (absolute results)
.TP
\fB\-I\fR illum
Set simulated instrument illumination using FWA (def \fB\-i\fR illum):
M0, M1, M2, A, C, D50, D50M2, D65, F5, F8, F10 or file.sp]
.TP
\fB\-i\fR illum
Choose illuminant for computation of CIE XYZ from spectral data & FWA:
A, C, D50 (def.), D50M2, D65, F5, F8, F10 or file.sp
.TP
\fB\-Q\fR observ
Choose CIE Observer for spectral data or CCSS instrument:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
(Choose FWA during operation)
.TP
\fB\-F\fR filter
Set filter configuration (if aplicable):
.TP
n
None
.TP
p
Polarising filter
.TP
6
D65
.TP
u
U.V. Cut
.TP
\fB\-E\fR extrafilterfile
Apply extra filter compensation file
.TP
\fB\-x\fR
Display Yxy instead of Lab
.TP
\fB\-h\fR
Display LCh instead of Lab
.TP
\fB\-V\fR
Show running average and std. devation from ref.
.TP
\fB\-T\fR
Display correlated color temperatures and CRI
.TP
\fB\-N\fR
Disable auto calibration of instrument
.TP
\fB\-H\fR
Start in high resolution spectrum mode (if available)
.TP
\fB\-X\fR file.ccmx
Apply Colorimeter Correction Matrix
.TP
\fB\-X\fR file.ccss
Use Colorimeter Calibration Spectral Samples for calibration
.TP
\fB\-Y\fR r|n
Override refresh, non\-refresh display mode
.TP
\fB\-Y\fR R:rate
Override measured refresh rate with rate Hz
.TP
\fB\-Y\fR A
Use non\-adaptive integration time mode (if available).
.TP
\fB\-W\fR n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
.TP
\fB\-D\fR [level]
Print debug diagnostics to stderr
.TP
logfile
Optional file to save reading results as text