.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.44.1.
.TH READ "1" "September 2014" "chartread" "User Commands"
.SH NAME
Read \- Read Target Test Chart.
.SH DESCRIPTION
Read Target Test Chart
.SH SYNOPSIS
.B chartread 
.RB [\-options]\ outfile
.TP
\fB\-v\fR
Verbose mode
.TP
\fB\-c\fR listno
Set communication port from the following list (default 1)
.IP
** No ports found **
.TP
\fB\-t\fR
Use transmission measurement mode
.TP
\fB\-d\fR
Use display measurement mode (white Y relative results)
.TP
\fB\-e\fR
Emissive for transparency on a light box
.TP
\fB\-p\fR
Measure patch by patch rather than strip
.TP
\fB\-x\fR [lx]
Take external values, either L*a*b* (\fB\-xl\fR) or XYZ (\fB\-xx\fR).
.TP
\fB\-n\fR
Don't save spectral information (default saves spectral)
.TP
\fB\-l\fR
Save CIE as D50 L*a*b* rather than XYZ
.TP
\fB\-L\fR
Save CIE as D50 L*a*b* as well as XYZ
.TP
\fB\-r\fR
Resume reading partly read chart
.TP
\fB\-I\fR file.cal
Override calibration info from .ti2 in resulting .ti3
.TP
\fB\-F\fR filter
Set filter configuration (if aplicable):
.TP
n
None
.TP
p
Polarising filter
.TP
6
D65
.TP
u
U.V. Cut
.TP
\fB\-N\fR
Disable initial calibration of instrument if possible
.TP
\fB\-B\fR
Disable auto bi\-directional strip recognition
.TP
\fB\-H\fR
Use high resolution spectrum mode (if available)
.TP
\fB\-X\fR file.ccmx
Apply Colorimeter Correction Matrix
.TP
\fB\-X\fR file.ccss
Use Colorimeter Calibration Spectral Samples for calibration
.TP
\fB\-Q\fR observ
Choose CIE Observer for CCSS instrument:
1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
.TP
\fB\-T\fR ratio
Modify strip patch consistency tolerance by ratio
.TP
\fB\-S\fR
Suppress wrong strip & unexpected value warnings
.TP
\fB\-W\fR n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
.TP
\fB\-D\fR [level]
Print debug diagnostics to stderr
.TP
outfile
Base name for input[ti2]/output[ti3] file