.TH AIDE 1 "2021-02-10" "aide v0.17.3" "User Commands"
.SH NAME
\fBaide\fP \- Advanced Intrusion Detection Environment
.SH SYNOPSIS
\fBaide\fP
\%[\fBparameters\fP]
\%\fBcommand\fP
.SH DESCRIPTION
\fBAIDE\fP is an intrusion detection system for checking the integrity
of files.

.SH COMMANDS
.PP
.IP "--check, -C"
Checks the database for inconsistencies. You must have an initialized
database to do this. This is also the default command. Without any
command \fBaide\fP does a check.
.IP "--init, -i"
Initialize the database. You must initialize a database and move it to
the appropriate place (see \fBdatabase_in\fR config option) before you can use
the \-\-check command.
.IP "--dry-init, -n"
Traverse the file system, match each file against the rule tree and report to stdout.

Neither reports nor the database are written in this mode.

To change the log level in this mode please use the \fB--log-level\fR command line parameter.

In this mode aide exits with status 0.

.IP "--update, -u"
Checks the database and updates the database non-interactively.
The input and output databases must be different.
.IP "--compare, -E"
Compares two databases. They must be defined in config file with
database=<url> and database_new=<url>.
.IP "--config-check, -D"
Stops after reading in the configuration file. Any errors will be reported.
To change the log level in this mode please use the \fB--log-level\fR
command line parameter.
.IP "--path-check=\fIfile_type\fR:\fIpath\fR, -p \fIfile_type\fR:\fIpath\fR"
Read configuration and match provided file_type and path against rule tree. The
path is independent of what is in the actual file system and needs to be
absolute. See RESTRICTED RULES section in aide.conf (5) for supported file
types.

To change the log level in this mode please use the \fB--log-level\fR command line parameter.

In this mode aide exits with status 0 if the file would be added to the tree, 1
if not and 2 if the file does not match a specified limit.

.SH PARAMETERS
.IP "--config=\fBconfigfile\fR , -c \fBconfigfile\fR"
Configuration is read from file \fBconfigfile\fR (see \fB--version\fP output for default value).
Use '-' for stdin.
.IP "--limit=\fBREGEX\fR , -l \fBREGEX\fR"
Limit command to entries matching REGEX. Note that the REGEX only matches
at the first position.

.RS
.B Example
.RS 3
Only check and update the database entries matching /etc (i.e. the /etc
directory) while leaving all other entries unchecked and unchanged:

.RS 3
.nf
aide --update --limit /etc
.fi
.RE
.RE
.RE

.IP "--before=\(dq\fBconfigparameters\fR\(dq , -B \(dq\fBconfigparameters\fR\(dq"
These \fBconfigparameters\fR are handled before the reading of the
configuration file. See aide.conf (5) for more details on what to put
here.
.IP "--after=\(dq\fBconfigparameters\fR\(dq , -A \(dq\fBconfigparameters\fR\(dq"
These \fBconfigparameters\fR are handled after the reading of the
configuration file. See aide.conf (5) for more details on what to put
here.
.IP --log-level=\fBlog_level\fR,-L\fBlog_level\fR
The log level to use (see aide.conf (5) for available log levels and more details).
This overwrites the log_level value set in any configuration file.
.IP --verbose=\fBverbosity_level\fR,-V\fBverbosity_level\fR
Removed in AIDE v0.17, use \fBlog_level\fR and \fBreport_level\fR config options instead (see aide.conf (5) for details).
.IP "--version,-v"
\fBaide\fP prints out its version number
.IP "--help,-h"
Prints out the standard help message.
.PP
.SH EXIT STATUS
Normally, the exit status is 0 if no errors occurred. Except when the
.BR --check ,
.BR --compare " or"
.B --update
command was requested, in which case the exit status is defined as:
.IP "1 * (new files reported?)     +"
.IP "2 * (removed files reported?) +"
.IP "4 * (changed files reported?)"
.PP
Since those three cases can occur together, the respective error codes
are added. For example, if there are new files and removed files reported,
the exit status will be 1 + 2 = 3.
.PP
Additionally, the following exit codes are defined for generic error
conditions:
.IP "14 Writing error"
.IP "15 Invalid argument error"
.IP "16 Unimplemented function error"
.IP "17 Configuration error"
.IP "18 IO error"
.IP "19 Version mismatch error"
.IP "20 EXEC error"
.IP "21 File lock error"
.PP
.SH SIGNAL HANDLING
Please note that due to mmap issues, aide cannot be terminated with
SIGTERM. Use SIGKILL to terminate.

SIGUSR1 toggles the log_level between current and debug level.
.PP
.SH NOTES

The checksums in the database and in the output are by default base64
encoded (see also report_base16 option).
To decode them you can use the following shell command:

echo <encoded_checksum> | base64 \-d | hexdump \-v \-e '32/1 "%02x" "\\n"'

.PP
.SH FILES

See \fB--version\fR output for the default \fBconfig file\fR and the
default \fBdatabase_in\fR and \fBdatabase_out\fR config values.

.SH SEE ALSO
.BR aide.conf (5)
.SH BUGS
There are probably bugs in this release. Please report them
at https://github.com/aide/aide/issues .
.SH DISCLAIMER
All trademarks are the property of their respective owners.
No animals were harmed while making this webpage or this piece of
software. Although some pizza delivery guy's feelings were hurt.
.BR