.TH IP\-MACSEC 8 "07 Mar 2016" "iproute" "Linux"
.SH NAME
ip-macsec \- MACsec device configuration
.SH "SYNOPSIS"
.BI "ip link add link " DEVICE " name " NAME " type macsec "
[ [
.BI address " <lladdr>"
]
.BI port " PORT"
|
.BI sci " <u64>"
] [
.BR cipher " { " default " | " gcm-aes-128 " | " gcm-aes-256 " | " gcm-aes-xpn-128 " | " gcm-aes-xpn-256 " } ] ["
.BI icvlen " ICVLEN"
] [
.BR encrypt " { " on " | " off " } ] ["
.BR send_sci " { " on " | " off " } ] ["
.BR end_station " { " on " | " off " } ] ["
.BR scb " { " on " | " off " } ] ["
.BR protect " { " on " | " off " } ] ["
.BR replay " { " on " | " off " } ] ["
.BI window " WINDOW"
] [
.BR validate " { " strict " | " check " | " disabled " } ] ["
.BI encodingsa " SA"
] [
.BR offload " { " off " | " phy " | " mac " }"
]

.BI "ip macsec add " DEV " tx sa"
.RI "{ " 0..3 " } [ " OPTS " ]"
.BI key " ID KEY"
.br
.BI "ip macsec set " DEV " tx sa"
.RI "{ " 0..3 " } [ " OPTS " ]"
.br
.BI "ip macsec del " DEV " tx sa"
.RI "{ " 0..3 " }"

.BI "ip macsec add " DEV " rx " SCI
.RB [ " on " | " off " ]
.br
.BI "ip macsec set " DEV " rx " SCI
.RB [ " on " | " off " ]
.br
.BI "ip macsec del " DEV " rx " SCI

.BI "ip macsec add " DEV " rx " SCI " sa"
.RI "{ " 0..3 " } [ " OPTS " ]"
.BI key " ID KEY"
.br
.BI "ip macsec set " DEV " rx " SCI " sa"
.RI "{ " 0..3 " } [ " OPTS " ]"
.br
.BI "ip macsec del " DEV " rx " SCI " sa"
.RI "{ " 0..3 " }"

.BI "ip macsec offload " DEV
.RB "{ " off " | " phy " | " mac " }"

.B ip macsec show
.RI [ " DEV " ]

.IR OPTS " := [ "
.BR pn " { "
.IR 1..2^32-1 " } |"
.BR xpn " { "
.IR 1..2^64-1 " } ] ["
.B salt
.IR SALT " ] ["
.B ssci
.IR <u32> " ] ["
.BR on " | " off " ]"
.br
.IR SCI " := { "
.B sci
.IR <u64> " | "
.BI port
.IR PORT
.BI address " <lladdr> "
}
.br
.IR PORT " := { " 1..2^16-1 " } "
.br
.IR SALT " := 96-bit hex string "


.SH DESCRIPTION
The
.B ip macsec
commands are used to configure transmit secure associations and receive secure channels and their secure associations on a MACsec device created with the
.B ip link add
command using the
.I macsec
type.

.SH EXAMPLES
.PP
.SS Create a MACsec device on link eth0 (offload is disabled by default)
.nf
# ip link add link eth0 macsec0 type macsec port 11 encrypt on
.PP
.SS Configure a secure association on that device
.nf
# ip macsec add macsec0 tx sa 0 pn 1024 on key 01 81818181818181818181818181818181
.PP
.SS Configure a receive channel
.nf
# ip macsec add macsec0 rx port 1234 address c6:19:52:8f:e6:a0
.PP
.SS Configure a receive association
.nf
# ip macsec add macsec0 rx port 1234 address c6:19:52:8f:e6:a0 sa 0 pn 1 on key 00 82828282828282828282828282828282
.PP
.SS Display MACsec configuration
.nf
# ip macsec show
.PP
.SS Configure offloading on an interface
.nf
# ip macsec offload macsec0 phy
.PP
.SS Configure offloading upon MACsec device creation
.nf
# ip link add link eth0 macsec0 type macsec port 11 encrypt on offload mac

.SH EXTENDED PACKET NUMBER EXAMPLES
.PP
.SS Create a MACsec device on link eth0 with enabled extended packet number (offload is disabled by default)
.nf
# ip link add link eth0 macsec0 type macsec port 11 encrypt on cipher gcm-aes-xpn-128
.PP
.SS Configure a secure association on that device
.nf
# ip macsec add macsec0 tx sa 0 xpn 1024 on salt 838383838383838383838383 ssci 123 key 01 81818181818181818181818181818181
.PP
.SS Configure a receive channel
.nf
# ip macsec add macsec0 rx port 11 address c6:19:52:8f:e6:a0
.PP
.SS Configure a receive association
.nf
# ip macsec add macsec0 rx port 11 address c6:19:52:8f:e6:a0 sa 0 xpn 1 on salt 838383838383838383838383 ssci 123 key 00 82828282828282828282828282828282
.PP
.SS Display MACsec configuration
.nf
# ip macsec show
.PP

.SH NOTES
This tool can be used to configure the 802.1AE keys of the interface. Note that 802.1AE uses GCM-AES
with a initialization vector (IV) derived from the packet number. The same key must not be used
with the same IV more than once. Instead, keys must be frequently regenerated and distributed.
This tool is thus mostly for debugging and testing, or in combination with a user-space application
that reconfigures the keys. It is wrong to just configure the keys statically and assume them to work
indefinitely. The suggested and standardized way for key management is 802.1X-2010, which is implemented
by wpa_supplicant.

.SH EXTENDED PACKET NUMBER NOTES
Passing cipher
.B gcm-aes-xpn-128
or
.B gcm-aes-xpn-256
to
.B ip link add
command using the
.I macsec
type requires using the keyword
.B 'xpn'
instead of
.B 'pn'
in addition to providing a salt using the
.B 'salt'
keyword and ssci using the
.B 'ssci'
keyword when using the
.B ip macsec
command.


.SH SEE ALSO
.br
.BR ip-link (8)
.BR wpa_supplicant (8)
.SH AUTHOR
Sabrina Dubroca <sd@queasysnail.net>